Reviews Straight Flush

Infratech Flush Mount Heater Frames 61.25\ Length, Stainless Steel

  • Infratech flush mount frames are stylish and versatile, allowing a seamless look for your heater that vanishes into the décor of a space..
  • Flush mount frames are available in a variety of sizes and colors to match your Infratech W, WD, C, CD-Series heater..
  • Frames require a flat ceiling and minimum 2” x 8” studs, where the heater can face straight down when recessed. Avoid flush mounting the heater close to a ceiling fan or light fixture..
  • You will need to hire a licensed contractor in order to complete a flush mount installation..
  • WARNING: Frame and heaters cannot be mounted on a sloped/ pitched ceiling. Flush Mount applications must always be installed on a flat, non-sloped ceiling..
Check Stock

Curaplex Curaslide Safety IV Catheter, 14G X 1.25\ Needle (Available in Box and Case Quantities) (200)

  • Neutral displacement connector with a clear housing visual confirmation of flush after use with medications or blood.
  • Straight fluid path allows for clearing of blood and blood residual with low flush volume as little as a 2.5 mL saline flush.
  • Minimal dead space or residual volume of 0.04 mL allows for lower flush volumes.
  • Clamping sequence not required, reducing educational burden and risk of error.
  • Enhanced patient safety and provide an effective microbial barrier against bacteria transfer and contamination.
Check Stock

Air Capital Rivet Set Kit - 5-Pc Model Number 10018

  • 3/32in, 1/8in, 5/32in and 3/16in straight-shaft tools.
  • For button head (AN 470) and flush aluminum solid rivets.
Check Stock

Cuz-D by Oliver 28 Tooth Carbide Tip Blade for Straight Flush Saw

  • Patented Arbor System - Eliminates Slippage and Produces Flush Cuts.
  • High Quality Carbide Tipped Blade - Maximum Performance & Life.
  • Non-Stick Coating - Smoother Cuts & Less Friction.
Check Stock

Cuz-D by Oliver 40 Tooth Carbide Tip Blade for Straight Flush Saw

  • Patented arbor system - eliminates slippage and produces flush cuts.
  • High quality Carbide tipped blade - maximum performance & life.
  • Non-Stick coating - smoother cuts & less friction.
Check Stock

Cuz-D by Oliver 20 Tooth Carbide Tip Blade for Straight Flush Saw

  • Patented arbor system - eliminates slippage and produces flush cuts.
  • High quality Carbide tipped blade - maximum performance & life.
  • Non-Stick coating - smoother cuts & less friction.
Check Stock

Oasis IV Mini Bore T-Connector, Sterile 6-7-in

  • NEUTRAL DISPLACEMENT CONNECTOR: Clinically-proven needlefree technology designed to reduce the risk of bacterial contamination and improve patient outcomes as it provides a safe and effective microbial barrier to help minimize infection risks..
  • STRAIGHT FLUID PATH: Designed for clearing blood and blood residual with low flush volumes. It can be used on all peripheral, arterial, and central venous catheters for the administration of IV fluids or medications..
  • EFFECTIVE MICROBIAL BARRIER: The neutral displacement straight fluid path design, split-septum and minimal deadspace work together to help minimize blood reflux into the tip of the catheter upon connection or disconnection of the luer..
  • SALINE FLUSH PROTOCOL: The clear housing of the MicroClave allows for visualization of the internal fluid path upon flushing the connector. The medical product comes in the case of 100..
  • TECHNICAL SPECIFICATIONS: The medical connector has residual volume of 0.04 mL, flow rate at gravity of 165 mL / minute, functional activations of 600 with blood compatibility and MRI compatibility and a high pressure compatibility of 10 mL/second..
Check Stock

Edge Supply Edge Banding Trimmer – Veneer Edge Trimmer for Wood Veneer Edge Banding, PVC, Melamine, Plastic – Veneer Trimmer for Perfect Straight Finish – Woodworking Veneer Cutter

  • EDGE BANDING TRIMMER – this expert designed edge banding trimmer easily cuts veneer edge banding with ease thanks to the circular, ultra-sharp blade. Cut off any excess material and achieve a perfect, straight finish every time, without tearing the banding.
  • STRAIGHT FLUSH EDGES – our veneer cutter is easy to use and is suitable for use by both professionals and hobby woodworkers. A versatile veneer trimmer which cuts neatly around tight circular radiuses and straight lines resulting in a clean, flush finish.
  • SUITABLE FOR A VARIETY OF VENEER SIZES – this edge banding cutter has been designed to fit edging up to 1 mm thick and between 0.5 and 2 inches wide.
  • PREMIUM QUALITY VENEER CUTTER – made from the highest quality carbon steel, this long-lasting veneer trimmer features a circular blade which supplies a clean cut and can be slightly rotated to expose a fresh new edge if needed. There is no need to change blades for years..
  • VERSATILE EDGE BANDING CUTTER – this veneer edge trimmer is ideal for a variety of woodworking projects including furniture, shelving and cabinetry and can be used on a wide range of materials including wood veneer, melamine, plastic, PVC and more.
Check Stock

Edge Supply Professional Heavy Duty Edge Banding Trimmer – Edge Trimmer for Wood Veneer Edge Banding, PVC, Melamine, Plastic – Veneer Trimmer for Perfect Straight Finish – Woodworking Veneer Cutter

  • EDGE BANDING POFESSIONAL HEAVY DUTY TRIMMER – this expert designed edge banding trimmer easily cuts veneer edge banding with ease thanks to the ultra-sharp steel blade. Cut off any excess material and achieve a perfect, straight finish every time, without tearing the banding.
  • STRAIGHT FLUSH EDGES – our veneer cutter is easy to use and is suitable for use by both professionals and hobby woodworkers. A versatile veneer trimmer which cuts neatly straight lines resulting in a clean, flush finish.
  • SUITABLE FOR A VARIETY OF EDGE BANDING SIZES – this edge banding cutter has been designed to fit edging up to 1 mm thick and between 0.5 and 2 inches wide bandings.
  • PREMIUM QUALITY VENEER CUTTER – made from the highest quality carbon steel, this long-lasting veneer trimmer features a steel blade which supplies a clean cut. The blade can be sharpenned so there is no need to replace blades like traditional trimmers..
  • VERSATILE EDGE BANDING CUTTER – this veneer edge trimmer is ideal for a variety of woodworking projects including furniture, shelving and cabinetry and can be used on a wide range of materials including wood veneer, melamine, plastic, PVC and more.
Check Stock

CUZ-D INDUSTRIES CARBIDE TIP SAW BLADE - 40 Tooth Premium Straight Flush Saw Blades Non-Stick General Purpose Wood Cutting Wheel Circular Saw Wheels 8.5 Inch

  • SPECIFIC FIT for STRAIGHT FLUSH SAW: This blade is made to work with the multi function Cuz D Saw. A unique, high performance, zero clearance saw that....
  • PATENTED ARBOR SYSTEM: Specially designed to eliminate sliding and produces flush, accurate straight edge cuts. The arbor surface remains recessed....
  • READY SET CUT: Carbide bladed tips for max performance and life. Our teeth are produced from high quality material and sharpening is done at a precise....
  • NON STICK COATED BLADES: Engineered for smoother cuts, faster speed, super accuracy and less friction for a high value, energy efficient solution.....
  • NO HASSLE REPLACEMENT: When you buy Cuz-D power tool saw blades, you can feel confident with our saw guarantee. If a saw breaks, we'll fix it. If we....
Check Stock

Hi-Tech Diamond 4"/5" Lapidary Trim Saw | Cutting Sawing Trimming Machine | Includes 4" AND 5" Saw Blades

  • 【Material】The saw blades uses SK5 high carbon steel, and the saw teeth are processed by high frequency quenching machine, and the hardness can reach HRC60-63 degrees..
  • 【High Working Efficiency】High carbon steel blade is extremely flexible to permit access to tight places, cutting on the pull-stroke to eliminate buckling..
  • 【Clean Cut Environment】Our woodworking flush cut trim saw takes triple-edge tooth, bringing you a clean cut environment and less sawdust after using..
  • 【Basic Information】Our woodworking flush cut trim saw overall length is 300mm/11.8in, saw blades length is approx.160mm / 6.3in, thickness is approx.0.6mm / 0.02in..
  • 【Straight Shank Petty Saw】Our woodworking flush cut trim saw is petty, lightweight, suitable for fine cutting..
Check Stock

WOODBRIDGE B0970S Smart Bidet Toilet Elongated One Piece Modern Design, Automatic Flushing, Heated Seat with Integrated Multi Function Remote Control, White & Cotton White T-0019 Toilet

  • ...he seat will activate the self-cleaning bidet/spray wand and follow by a powerful flush on your departure for hands-free operation.
  • Product 1: ✅ [EXCLUSIVE ARC-SHAPE SPRAY ROD]: Exclusive Arc-shape spray rod can reach up to 4.7 inch (120mm) from the dirt drop point and offer a wider cleaning range than traditional straight spray rod.
  • Product 1: ✅ [LOW PRESSURE OPERATION TECHNOLOGY]: Built in 0.09 MPA dynamic low pressure start-up program which is suitable for places with lower water pressure that current pressure-type flushing toilet can't fully function..
  • Product 2: ✅ [LUXURIOUS MODERN DESIGN]: Luxurious Modern Design one piece toilet , Clean, sleek look and compliment with different styles like modern , craftsman , traditional and etc..
  • Product 2: ✅ [EASIEST TO CLEAN TOILET]: WOODBRIDGE toilets are the easiest to clean on the market, with a completely smooth, easy to wipe down surface. With our fully concealed trap-way, there are no bends or corners to gather dust. Also, no large mounting holes or ugly plastic caps to be seen..
  • Product 2: ✅ [QUITE AND POWERFUL FLUSHING]: Siphon Flushing one piece toilet, Fully glazed flush system , bringing a super quiet and powerful flushing - NO clogs, NO leaks, and NO problem.
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock