Reviews Straight Edge Clamp

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (36 inch Clamp)

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtu....
Check Stock

ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots All 3 Clamps 24 36 and 50 inch

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use..
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides..
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtu....
Check Stock

Rockler 52” to 104” Low Profile Straight Edge Clamps for Woodworking w/ Extension Tool, 4 Screws, Nuts, & Bolts - 2 Straight Cut T Track Clamp & Handle for Router or Circular Saw Guide

  • Straight Edge Tool Rockler Clamp System: Make your workshop more versatile with our wood cutter hold down clamp. Get arrow-straight cuts with this straight edge wood cutting equipment. The clamp system comes with 2 clamps, a handle, & an extension tool to join the panel and cut large wood. Connect two 52” sections to create a 104” large straight edge..
  • Versatile Uses: The easy assembled cutting straight edge clamp guide works efficiently to cut plywood, timber, and others..
  • Easy to Use: The straight edge clamps slide along an integral T-track to accommodate nearly any size of material..
  • Premium Build: The straight edge clamp is made with durable construction material to withstand the weight of wood in the workshops..
  • What’s Included: This straight edge clamp kit includes (1) Rockler 52” to 104” low profile straight edge system (1) pair of straight line clamps, (1) handle (1) extension tool. The T track system greatly works when you cut the large wood..
Check Stock

BORA 100 WTX Clamp Edge and Saw Plate Set for Woodworking Contractors Carpenters and DIY Guide for Circular Saws 100 Inch Cutting Length | 545106K

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
  • Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
  • Clamp Edge and Extension include ruled edge for easy measuring. Length-62.75 inch, Width-3 inch, Height-1.5 inch.
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
Check Stock

BORA 50\ Ruled WTX Clamp Edge and Saw Plate Set for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 50 Inch Cutting Length | 545056K

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
  • Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
  • Clamp Edge includes ruled edge for easy measuring.
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
  • Fits right- and left-handed circular saws.
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

Bora WTX Clamp Edge 4 Pc. Set, 50” + 24” Clamps + 50” Extension + Saw Plate

  • Set includes a saw plate, 24-inch and 50-inch clamp edges, and 50-inch extension that can be attached to either clamp edge.
  • Ridged aluminum straight edge guides make straight, accurate track saw like cuts.
  • Clamp edge features a soft-grip, non-marring rubberized clamping pad securely grips all surfaces.
  • Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 (89mm) inches wide.
  • Use the saw guide with your circular saw to cut with unmatched precision, or used for free hand cutting with the plate attached.
Check Stock

BORA WTX Ruled Clamp Edge Saw Guide 50 Inch Length Rail for Circular Saws Cutting Track for Woodworking Contractors DIY 545050

  • Time Saver: The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with....
  • Fast Set-Up: Adjust the gripping clamp end to the desired length, lock it in place, and start cutting.
  • Long Cutting Length: This 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws. Easily increase....
  • Ruled Straight Edge: The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always....
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to....
Check Stock

Pro-Grip Straight Edge Clamps (24\ Clamp)

  • Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it instant accuracy for cross-cutting and routing..
  • Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps Feature: An extruded aluminum body that is light weight and durable..
  • The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects..
  • Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play..
  • The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip. This package includes 1 each 24" clamp..
Check Stock

Bora 543056K Circular Saw Plate and Straight Edge Guide System . The 50” Clamp Edge and Saw Sled That Allows For Straight, True Cuts

  • EVERYTHING YOU NEED FOR STRAIGHT CUTS – The 50” clamp edge adjusts to firmly clamp to both ends of your board/material, and the saw plate / saw sled easily attaches to your circular saw..
  • WORK TOGETHER FOR PRECISION – The saw guide (with your saw attached) slides right into the fastened clamp edge, and slides along it, ensuring your cuts are straight and true..
  • WORKS WITH ALMOST ANY MAKE/MODEL SAW – Works with most makes and model circular saw, both in right handed and left handed configuration..
  • EASY TO USE – The clamp edge easily attaches and de-attaches, and is made of high quality aluminum. The saw plate easily fastens tightly to your saw (for added versatility, your saw can still be used freehand with the saw plate on as well.).
Check Stock

Bora Jigsaw Guide For WTX or NGX Clamp Edge Use for making Straight Cuts & As A Steady Guide for your Jigsaw -542009

  • Made for jigsaws - this jigsaw guide is specifically designed to fit most jigsaws.
  • Easy to use - the jigsaw guide attaches easily to the Bora clamp edge, and your Jigsaw seamlessly fits into it, allowing for precise straight cuts.
  • Solid design - With two "tongue and groove" Points that slide into the Bora clamp Edge's side grooves, it's a firm, steady guide for your Jigsaw.
  • Fully adjustable - the sliding side points and locking screw allow it to accommodate almost any size Jigsaw. Adjustable pointer guide keeps cuts true.
  • An ideal woodworking accessory – made to use with our Bora Clamp edge range to help you achieve straight cuts with your Jigsaw.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Bora 50” Ruled WTX Clamp Edge Extension for WTX Clamp Edge Saw Guide for Woodworking Contractors Carpenters and DIY 50 inch Extension 545060

  • COMPATIBLE WITH BORA WTX CLAMP EDGE: The WTX Extension is designed specifically to work with the Bora WTX Clamp Edge Saw Guides.
  • EXTEND YOUR CUTTING CAPACITY: With the 50 inch WTX Clamp Edge Extension you will get another 50 inches of cutting capacity to add to any length Bora....
  • GET IT STRAIGHT EVERY TIME: This rigid aluminum guide extension is a must-have accessory for keeping your cutting on track. It’s 50-inch length....
  • MAKE MEASURING EASY: A ruled edge with both metric and imperial measurements make your job of getting perfect cuts quick and easy.
Check Stock