Reviews Storage Oscilloscope

OWON SDS1104 100MHz 4 Channels Digital Desktop Oscilloscope 1GS/s Sample Rate Portable Oscillometer

  • 【Professional Storage Oscilloscope】- Super-economical digital storage oscilloscope.Cost-effectiveness,100MHz bandwidth,4 channels input,max input voltage 400 Vpp,1GS/s sample rate,8-bit high resolution,SCPI and LabVIEW (USBTMC) supported.Communicate with computer through the supplied USB cable.Front USB port,support U disk storage..
  • 【7" LCD Screen & Simple Operation】- This oscilloscope with 7" large color LCD screen, 800 x 480 pixels display, clear and realistic waveform display。Easy-accessible operation menu gets you to the result conveniently。ultra-thin body and handle design, lightweight and portable, cooling holes on the back can ensure fast cooling during prolonged use..
  • "Multi-Function :Waveform storage function,16 sets of waveforms can be saved in the internal memory or U disk. The saved waveform and the measured waveform can be compared and analyzed. One-Click show all measurements,built-in 39 types of auto measurement,convenient to view the waveform information. FFT spectrum analysis function, supports for Hamming, Blackman, Rectangular, Kaiser, Bartlett.".
  • 【Widely Used Oscilloscope】- With multiple trigger functions and more than 30 kinds of automatic measurement functions,Vmax, Vmin, Vpp, Vtop, Vbase, Vamp, Vavg, Vrms, Cycle RM....
Check Stock

USB Oscilloscope, PC Based Dual Channel 25MHz Digital Oscilloscope, Handheld Mini Digital Storage Oscilloscope, Multi Functional, MIT USB Isolation, with Probe

  • ▶▶PC virtual oscilloscope◀◀ dual-channel virtual oscilloscope, the detected waveform can be displayed on the computer, image storage, display on the same screen and other multi-function computer virtual oscilloscope..
  • ▶▶Advanced◀◀ dual-channel input, 25Mhz bandwidth, 100MS/s sampling rate, 5K storage depth, fast acquisition speed, and general test requirements can be met..
  • ▶▶Weak attenuation◀◀ The 25Mhz sine wave amplitude measured by the VDS1022I oscilloscope is 904mV, according to the international standard (-3dB attenuation, 707mV), which is better than the international standard and presents a perfect waveform..
  • ▶▶Function◀◀ single channel/alternate channel trigger.
  • X-Y/FFT waveform display on the same screen.
  • 18 groups of values can be measured simultaneously.
  • multi-function to meet your measurement needs..
  • ▶▶Data recording◀◀ The waveform can be recorded/saved, and the maximum storage is 4000M, which can be read at any time. The waveform is perfect. It is a good helper for papers..
Check Stock

Hantek 2D72 2CH Handheld Oscilloscope Scopemeter with Waveform Generator, 70MHz 250MSa/s

  • Professional Handheld Oscilloscope -- 120 MHz analog bandwidth,with an equivalent sampling rate of 500MSps. 3 trigger mode: Auto/Normal/Single. 4-position square wave signal output: 1kHz, 10kHz, 100kHz, 1MHz..
  • Safety & Convenient Digital Oscilloscope -- The built-in high voltage protection module can withstand up to 400V continuous voltage and 800V peak voltage. Don't worry about the oscilloscope burnout caused by the high voltage not being probed to the 10X position..
  • Proster Oscilloscope with HD 2.4" Color Screen: Display high-definition LCD screen with 2.4-inch 320×240 resolution. Extremely convenient and fast waveform storage function, can store up to 2500 waveform pictures. Powerful waveform file manager, support for thumbnail browsing, viewing, detail viewing, page turning, deletion and more..
  • Portable Oscilloscope -- Backlight brightness：1～8 levels. Built-in lithium battery, about 8 hours standby time when fully charged. Protective silicone covers on both sides of the instrument, slip-resistant, drop-resistant and shock-resistant, comfortable hand feel..
  • Professional Oscilloscope -- Accessories: 100MHz probe, charging cable, user manual，cloth bag. Suitable for home appliance inspection, automotive diagnostics, research and education, produc....
Check Stock

Goupchn Oscilloscope Probes Kit with Accessories 200Mhz Test Leads Set BNC to Mini Grabber Cable 4mm Banana Plug to Test Hook Clip Leads

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x 200mhz oscilloscope probes with with Accessories kit, 1 x bnc to minigrabber test lead, 2 x 4mm banana plug to test hook leads, 1 x white transparent storage box..
Check Stock

Digital Oscilloscope, Proster Handheld Oscilloscope 500MS/s Sampling Rate, Portable Storage Oscilloscope 2.4\ LCD Display with 120MHz Waveform Bandwidth, Support 2500 Waveform Storage

  • Professional Handheld Oscilloscope -- 120 MHz analog bandwidth,with an equivalent sampling rate of 500MSps. 3 trigger mode: Auto/Normal/Single. 4-position square wave signal output: 1kHz, 10kHz, 100kHz, 1MHz..
  • Safety & Convenient Digital Oscilloscope -- The built-in high voltage protection module can withstand up to 400V continuous voltage and 800V peak voltage. Don't worry about the oscilloscope burnout caused by the high voltage not being probed to the 10X position..
  • Proster Oscilloscope with HD 2.4" Color Screen: Display high-definition LCD screen with 2.4-inch 320×240 resolution. Extremely convenient and fast waveform storage function, can store up to 2500 waveform pictures. Powerful waveform file manager, support for thumbnail browsing, viewing, detail viewing, page turning, deletion and more..
  • Portable Oscilloscope -- Backlight brightness：1～8 levels. Built-in lithium battery, about 8 hours standby time when fully charged. Protective silicone covers on both sides of the instrument, slip-resistant, drop-resistant and shock-resistant, comfortable hand feel..
  • Professional Oscilloscope -- Accessories: 100MHz probe, charging cable, user manual，cloth bag. Suitable for home appliance inspection, automotive diagnostics, research and education, produc....
Check Stock

EONE ET310B Bluetooth Oscilloscope Multimeter Connectable to Android Phone Handheld Digital Oscilloscopes Kit DSO+DMM 80M Sampling 20MHz Bandwidth Auto Waveform Capture

  • ▼LCD display Oscilloscope and auto-range TRMS Multimeter in 1 lab oscilloscope meter, portable design, more convenient and cost-effective.....
  • ▼Connectable to Android phone and tablets wirelessly by bluetooth, remote testing available, suitable for test at difficult environment..
  • ▼Multimeter functions: 4000-count, automatic range, TRMS, AC/DC voltage, AC/DC current, resistance, frequency, capacitance, diode test, duty ratio,....
  • ▼Oscilloscope functions: 80M sampling rate, 20MHz analog bandwidth, one-key oscilloscope. Trigger modes: auto, normal, single. Auto measure: Vp-p,....
  • ▼Display maximum value, minimum value, difference value and relative value on the same screen. Storage/readout 100 sets waveforms and 100 sets....
Check Stock

UNI-T UTG962 Function Generator, UTD2152CEX Oscilloscope, UTP1306 Switching DC Power Supply

  • UT81 series handheld digital oscilloscope multimeters combine oscilloscope and digital multimeter in one..
  • Oscilloscope measurement mode includes signal input, data processing, auto measure, waveform storage, and transfer..
  • Multimeter mode features AC/DC voltage and current, resistance, diode, continuity, frequency, duty ratio, and capacitance..
  • True RMS Multimeter for Voltage, Current, Resistance, Capacitance, Duty Cycle & Diode test. Double Insulated and Protected against Overcharges..
  • Simplify operation, convenient to use. Portable, light weight. Automatic Sleep Mode, Automatic Power Off, Automatic Range, Automatic Polarity Indication, Automatic Over-range Indication..
Check Stock

Riiai 2-in-1 Digital Oscilloscope & Transistor Tester, Real-time 2.5MS/s Sampling Rate 200kHz Bandwidth, 2.4 inch TFT Color Screen, PWM Square Wave Output, Diode Voltage Continuity Tester

  • ⭐【2 in 1 Oscilloscope & Transistor Tester】--- This portable digital oscilloscope combines an electronic component tester, PWM signal generator, and other functions into one."Oscilloscope" mode to test the signal waveform of the circuit while"Mos Test" mode can test various types of transistors and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance, resistance, inductance components and etc. More cost-effective to use, more test functions to choose from..
  • ⭐【High-precision & Real-time Display】--- The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth. Up to ±400V voltage signal can be measured. Self-contained 80Khz/5.0V PWM wave test signal source with adjustable duty cycle. With a Single, Normal, Automatic trigger, it can be used for both periodic and aperiodic digital signals. Other modes include circuit continuity test, 0-16V input voltage measure, PWM output, 0-24V Zener diode measure and etc..
  • ⭐【2.4 Inch TFT Screen & 1500mah Rechargeable Battery】--- The transistor tester adopts a built-in 1500 mah battery that will get fully charged within 1-2 hours via a 5V/2A adapter and can work for 4 hours(Finish Green Indicator/Charging Red Indicator). The digital handheld pocket oscil....
Check Stock

Oscilloscope Multimeter, 2-in-1 Intelligent Digital Scope Meter Multimeter, Professional LED Handheld Oscilloscope Multimeter with 200ksps A/D Automatic Waveform Capture Function

  • DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
  • DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

JINMEI Hard EVA Dedicated Case for LIUMY Oscilloscope Multimeter.

  • PERFECT FIT: We've specifically designed the case to fit your LIUMY Oscilloscope Multimeter/AUKUYEE Q15001 Digital Oscilloscope/ETEPON/STARTO Oscilloscope..
  • 100％Safety ：The case is shockproof dustproof and water resistance, protect your favorite device from bumps dents and scratches..
  • CONVENIENT DESIGN:internal adopt shockproof design,it provides superior and safe storage for cables and small accessories.And the unique double-layer sponge design also make your and accessories well protected..
  • CONVENIENT DESIGN: Steady hand strap for portability, Inner Mesh pocket design perfectly for accessories , Smooth but strong 360 degree zipper for easy Opening and Closing..
  • Material:Premium EVA velvet material ,The portable design and ideal size is easy to carry and fit in your handbag and luggage, perfect for travel.For sale is case only (device and accessories are sold separately)。Note ：it doesn't include the equipment (Case Only)。.
Check Stock

DSO138 Oscilloscope, DIY Mini Oscilloscope DSO-138, 2.4″ TFT 1MSPS Digital Oscilloscope Kit Handheld Pocket Sized 13803K (Welded Version)

  • 【WIDELY USE】DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay). Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
  • 【EXCELLENT QUALITY】This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • 【PRODUCT FEATURE】DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
  • 【NO NEED SOLDERED】DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • 【DIY DESIGN】Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

Hantek 6022BE USB Digital Storage Oscilloscope 2 CH 20MHz 48MSa/s Portable Oscilloscope (6022BE)

  • ⚡【USB Digital Storage Oscilloscope】 Cost-effectiveness, 20MHz bandwidth 2CH scope, 48MSa/s sample rate, with 2pcs probes.
  • Standard USBXI (TM) interface, easyly inserts into USBXI (TM) housing to make up a combination instrument..
  • ⚡【Features】High performance, 48MS/s real-time sampling, 20MHz Bandwidth. Standard USBXITM interface, easyly inserts into USBXITM housing to make up a combination instrument. USB2.0 interface, no external power source required, easy to use. 23 measurement functions, PASS/FAIL Check, be suitable for technical application. Waveform average, persistence, intensity,invert,addition, subtraction, multiplication, division,X-Y plot..
  • ⚡【Portable & Compact design】 USB2.0 interface, no external power source required, easy to use. Be suitable for notebook computer, product line maintenance,be used easily on business. Dimensions (mm):200(L) x120(W) x35(H), be carried easily..
  • ⚡【What you will get】 1 x Hantek 6022BE USB Digital Storage Oscilloscope ,1 x USB Cable ,2 x Oscilloscope probes , 1 x Disc.
  • ⚡【CE Certificate & One Year Warranty】 High-quality product.It has CE Certificate and conforms to national standards.We provide 12-Month after sale service,if quality problems happen in a guaranteed period, please contac....
Check Stock

DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Pocket-Size Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Electronic Learning Set, Assembled Vision (Welded)

  • This DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • This oscilloscope board uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • 2.4″ Oscilloscope with automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • 2.4 inch TFT handheld pocket-size digital oscilloscope with waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Partially open-sourced,the MCU has been programmed, adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock