Reviews Stepper Drive

Befenybay 50mm Effective Travel Length Mini Linear Rail Guide Lead Screw T6x1 with NEMA11 Stepper Motor for DIY CNC Router Parts X Y Z Linear Stage Actuator

  • DURABLE: The slide screw stepper motor made of high quality meterial, strong and durable in use, working voltage DC 9-12V..
  • MAXIMUM LINEAR SPEED: The maximum linear speed of lead screw worm drive stepper motor is 25mm per second..
  • APPLICATION: The DC 12V stepper motor widely used for small devices such as medical equipment, laser engraving machine, etc..
  • PRODUCT PARAMETER: The linear screw stepper motor moves 0.25mm for one step, can use microstep driver if need smaller..
  • NOTE: The stepper motor need a A4988 driver(not included) to drive, can not directly connect to power..
Check Stock

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • Stepper motor with a standard interface..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking.
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).
Check Stock

MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories

  • Support a Variety of Stepper Drivers -- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like..
  • Reserve External Driver Signal -- available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t..
  • Use CH340 Serial Port Chip -- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2..
  • Support 24V Input -- The heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4..
  • Compatible With -- Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire..
Check Stock

Goplus 2 in 1 Under Desk Elliptical Stepper, Resistance Adjustable, More Stable with Heavier Weight, Portable Mini Magnetic Step Machine, Compact Strider

  • Ergonomic Design for Safety and Comfort -- This Stepper is designed with two large, non-slip textured pedals to secure your feet. The elliptical motion protects your knee joints from injuries. This portable machine can be used for a workout either while seated or standing making it very flexible and convenient..
  • Flywheels Combined with Silent Belt Drive -- The balanced flywheel creates more momentum for a longer time allowing you to go for longer distance creating real outdoors jogging experience. Furthermore, silent belt drive mechanism ensures smooth and whisper-quiet operation so you can workout discretely without disturbing anybody around you..
  • Adjustable Tension Levels for the Different Motion -- This elliptical stepper has an excellent tension control system allowing you to adjust the tension level manually for an easier or more difficult workout. With a tension knob step adjustment you can stimulate the exercise effects of real jogging and climbing. Thus this elliptical stepper meets the speed, strength and endurance requirements of a wide variety of users..
  • LCD Display Monitor to Track Exercise Data -- This stepper is equipped with an easy-to-read LCD screen for keeping track of your motion parameters in real time, such as time, speed, distance,....
Check Stock

Sunny Health & Fitness Versa Stepper Step Machine w/Wide Non-Slip Pedals, Resistance Bands and LCD Monitor - SF-S0870

  • CONVENIENT DISPLAY: Keep track of your progress by using the battery-powered LCD to cycle through time, calories burned, total steps, and steps-per-minute..
  • RESISTANCE BANDS: Get a total body workout when you attach the included resistance bands to the stepper. Use the bands, which have a weight equivalent of 15 lbs. when stretched, or attach your own removable bands, to perform exercises like crossovers and bicep curls..
  • MAXIMUM PORTABILITY: This stepper weighs just under 22lbs, which makes it easy to move and store in your home or office..
  • ULTIMATE COMFORT: The wide-body design and ensure maximum stability with each step. And the oversized foot pedals have a textured finish that can reduce slippage while on the machine. The stabilizing feet make it easy to level to stepper on uneven surfaces..
  • DUAL HYDRAULIC-DRIVE SYSTEM: Experience quiet and powerful steps when you engage with the hydraulic drive system. The mechanism on the exercise stepper, which supports up to 245 lbs., is designed to assist you in challenging your glutes, thighs, and calves as you step..
Check Stock

CenryKay 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board and 10pcs Dupont Wire Male to Female Breadboard Jumper Wires Compatible with Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • The motor is gear-reduced, the noise is extremely low, and it can be driven with 5V running smoothly..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+Dupont Wire ..
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

  • 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Motor diameter: 1.1 inches.Wire length：9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..
Check Stock

Fastens

  • 【Upgrade Mini Stepper With Handlebar】Stepper with Handlebar helps keep you balanced while you step. Great for beginners who are new to the stepping world. U-shaped Handlebar Provide different grip points, meets more different heights of your family. The new design of the handlebar rod bend outwards provides enough space for stepping exercises to prevent the knee from touching the rod during exercise..
  • 【330 LBS Weight Capacity】Sportsroyals twist stepper for exercise used 2mm high-quality steel and precision bearings, more sturdy and durable. Heavy-duty steel construction after thousands of tests, we make sure our step machines are to support 330lbs..
  • 【Burn more Calories & Shape your Body】Twist action helps you tone thighs and buttocks while achieving a challenging cardiovascular workout. Resistance Bands work arms, chest, back, and shoulders for total body workout. Perfect for weight loss, body shape, and daily exercise..
  • 【Quiet Hydraulic Drive System】Built with a European standard hydraulic cylinder strengthen, this mini stair stepper with handlebar provides a quiet and safe using environment. The intern....
Check Stock

CNC Control Board, MYSWEETY GRBL 3 Axis Engraving Machine Controller Board for DIY Mini CNC Wood Router Engraver Machine

  • Software: GRBL controller, Universal Gcode Sender..
  • Support XYZ three-axis control, spindle..
  • Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..
Check Stock

Twotrees Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version

  • 【1】Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire..
  • 【2】Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on..
  • 【3】Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current..
  • 【4】The largest 32 divisions of the 6 models are optional.
  • Suitable for 4 wires, 6 wires and 8 wires stepper motor..
  • 【5】Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion..
Check Stock

KEYESTUDIO 3D Printer Controller Board RAMPS 1.4 REPRAP Mendel PRUSA with Stepper Jumper Screw Terminal Block for Arduino Mega and ramps 1.4 Projects

  • The RAMPS1.4A is used as driving shield for 3D printers, it is easy to stack it onto the MEGA 2560 control board..
  • It has total 5 slots for stepper motor drive module to drive 5-channel stepper motors. The slots are compatible with all kinds of drive modules like....
  • There are 3 jumper caps under each slot, which can be used to control the working subdivision of drive modules..
  • For example, if connect the A4988 and plug three jumpers, the subdivision port MS1、MS2 and MS3 of A4988 module are at active HIGH, so the A4988....
  • But if unplug the three jumpers, MS1、MS2 and MS3 of A4988 module are at active LOW, so the A4988 module is in full-step working mode..
Check Stock

KOOKYE 2 x 28BYJ-48 DC 5V Stepper Motor + ULN2003 Driver Test Module Board for Arduino Raspberry Pi

  • This is a stepper motor and a stepper motor driver..
  • Mainly used in air conditioner louver, small cooling and heating fan etc. Stable and all technic parameters are qualified for national electronic....
  • On-board ULN2003A chipset,On-board 4-way indicator light,On-board XH-5P socket,Compatible with Arduino..
Check Stock