Lippert Components 379147 Motor and Screws (For Kwikee IMGL Step)
- 40% More motor torque gives step a strong lock-out and solid feel..
- Motor is designed to automatically shut off when/if step strikes an obstacle..
- Waterproof wiring and connectors prevent shorts and corrosion.For use with triple and quad step configurations.
- New Integrated Kwikee Step Motor. Note: Kwikee Part number 379147.
Check StockStepper Motor HAT for Raspberry Pi,Jetson Nano Onboard Dual DRV8825 Motor Controller Built-in Microstepping Indexer Drives Two Stepper Motors Up to 1/32 Microstepping 5V 2.5A
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
- Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO).
- Integrates 5V regulator, allows providing power to Raspberry Pi.
- 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
- Adjustable motor drive current via potentiometer, maximum 2.5A current output.
- Onboard dual DRV8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use.
- Onboard multi connector options for stepper motors in different specifications.
Check StockGledewen RV Entry Step Motor 300-1406 Compatible with RV Coach Motorhome Toy Hauler All Electric Stair Replace 1820124 369506 301695 SP-163669 SP-1636669
- 【EASY TO INSTALL】This RV step motor can be replaced directly, simple to operate, just takes 10 minutes. Making the camper stairs work very....
- 【PREMIUM QUALITY】Long life-span matters, that is why our motor for camper step is crafted from stronger quality materials and designed with extra....
- 【PERFECT FIT】RV, Travel Trailer, Coach, Motorhome, Toyhauler, WHEEL RV all electric step.
- Step motor compatible with Lippert, Kwikee RVers stairs..
- 【REPLACE OE NUMBER】1820124,369506,301695,380073,3001406,SP-1636669,163669,5973820,205-1007,205-1009. Meets or exceeds OEM standards and very....
- 【24-MONTH WARRANTY】Our RV motor is 100% tested before shipping. If the electric motor cracks, stops working or any other problems, contact us....
Check StockMOCW RV Entry Step Motor 300-1406 RV Step Motor Fit for RV Coach Motorhome & Transport Replace OE # 369506 1820124 SP-1636669
- The RV Entry Step Motor Replace OE # 300-1406, 369506, 1820124, SP-163669..
- The step motor direct replacement for RV, Coach, Toyhauler, Motorhome,and Transport Vehicles..
- Only for step motor. Could operate the automatic extension of the pedal.Perfect fit with original parts..
- Every items have been tested for operation before shipment! Please check OEM part number and compatibility before purchase it!.
- Package includes 1 X RV Step Motor. One full year of warranty. Any questions,welcome to contact us for a new replacement or full refund without....
Check StockStepper Motor HAT Drives Two Stepper Motors Up to 1/32 Microstepping for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B for Use 3D Printer etc @XYGStudy
- This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping..
- Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions, Jetson Nano.
- 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
- Applications: 3D Printer, Sculpturing machine, Mechanical arm.
Check StockAiTrip A4988 Compatible StepStick Stepper Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4 Pack of 5pcs 5pcs A4988
- A4988 driver board widely used in 3D printers and small CNC machines.
- Simple step and direction control interface.
- Thermal protection, over-current protection, ground fault protection.
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated....
Check StockDaFuRui 5Pcs A4988 Stepstick Stepper Motor Driver Module with Aluminum Heat Sink for 3D Printer Reprap CNC Machine or Robotics
- ★A4988 is a complete microstepping motor driver with built-in translator for easy operation..
- ★Five step resolutions:full-step,half-step,quarter-step,eighth-step,and sixteenth-step.Output drive capacity of up to 35V and±2A..
- ★Micro-step operation, Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)..
- ★Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection..
- ★Applications: Stepper motors /3D printer/CNC/engraving machines/Supported 3d printers..
Check Stock
Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D
- ... work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
- Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable..
Check StockOtter: What Pet Is Best? (My First I Can Read)
- Introductory mechanical engineering kit for ages five and up..
- A beautifully-illustrated storybook manual follows Ty and Karlie, two young engineers, as they meet a variety of fun, cute robotic animals at the robot pet shop!.
- Clear and detailed step-by-step assembly instructions guide children to build 8 motorized models of the robots from the story, including an owl, french bulldog, sloth, panda, chameleon, cat, turtle, and rabbit..
- Model building develops fine motor skills: compatible with other Kids First early engineering kits, the large cubic building components are perfect for the target age group..
- Motor box: The included battery-powered motor box is what gets the models moving! (2 AA batteries required, not included).
Check StockNeewer Camera Slider Motorized 31.5-inch APP Control Carbon Fiber Track Dolly Rail with Time Lapse Video Shot Follow Focus Shot and 120 Degree Panoramic Shooting，Only compatible with iPhone
- 【KINDLY NOTE】Because we are upgrading the download page, the QR code printed on the motor is currently invalid for Android phones. Please scan the....
- ULTRA SILENT STEP MOTOR DRIVING AND PRECISE: Have a unique silent step motor driving technology which combines ultra precise step motor positioning....
- LIGHTWEIGHT AND BALANCED DESIGN: Made of carbon fiber and aluminum alloy, lightweight and convenient to carry outside for photography. Use 8....
- SUPPORT MULTIPLE SHOOTING MODES: Focusing shot and 120 degree wide angle shoot are available. It supports time-lapse shooting, video shooting and auto....
- UNIVERSAL COMPATIBILITY: The electric camera slider is compatible with Canon, Nikon, Sony, Panasonic, Samsung and other camcorder and micro-camera.
Check StockKwikee Electric Step Table Motor and Cable Replacement for 5th Wheel RVs, Travel Trailers and Motorhomes
- Designed to help the step automatically retract and extend when the coach door is opened and closed.
- Motor will automatically shut down if the step strikes an obstacle.
- Weatherproof wiring and connectors prevent shorts and corrosion in the system.
- Interchangeable with Kwikee part number 1101428.
Check StockLEABON 300-1406 RV Entry Step Motor Compatible with RV Coach Motorhome Toyhauler OEM Replace 369506 1820124 1636669
- 【REPLACE THE FAULTY MOTOR】If your RV Entry Stepsis retracting or extending only part of the way or won't stay retracted while driving, or the....
- 【HIGH QUALITY】Our Entry Steps Motor use of enhanced high-quality materials, wear-resistant, corrosion-resistant, moisture-resistant, long service....
- 【INSTALL】The entry-level stepper motor of the electric caravan is easy to install, it can perfectly replace old products, seamlessly fit, that is....
- 【RV Step Part Number】300-1406 3001406 1820124 369506 301695 163669 SP-163669 SP-1636669, Compatible with RV, Coach, Motorhome, Toyhauler and Step....
- 【SERVICE GUARANTEE】This RV Entry Steps Motor is Affordable, Superior Aftermarket Part, If you Have any Question, Please Contact us, You have....
Check StockAntennaX Power Antenna Replacement Mast for Toyota Sequoia
- This is a new high quality aftermarket stainless steel Power Antenna Mast that cost less than 50% of the dealer factory retail price.
- If you can hear your power antenna motor running, clicking, or grinding when you turn on and off your radio, then all you need to do is replace your power antenna mast.
- If you do not hear your Power Antenna Motor running, then you will need to replace the whole unit.
- Installation is very simple and can be done without removing the power antenna motor from your vehicle Detailed step-by-step installation instructions are included and written in simple english and include diagrams, photographs, and troubleshooting.
Check Stock
