Reviews Step Cutting Machinery

ALUMINUM WELDING: A COMPLETE GUIDE TO ALUMINUM WELDING

  • ...of high-strength aluminum ingot material, precision die-casting, reasonable structural design and good walking stability. It features light and compact in structure, as ideal portable machine..
  • 2.【Application】This machine is suitable for factories such as shipbuilding, machinery, steel structure, construction and other industries. Also suitable for other large, medium and small enterprises to cut steel..
  • 3.【Tech Parameters】Cutting Speed: 6"-31.4" (150-800 mm) /min.
  • Cutting Thickness: 0.23"-4" (6-100 mm) (by standard accessories). Grove range: I.Y.V(45°). Tracks: about 6'(1.8m)..
  • 4.【Advanced Design】The speed control series adopts mechanical speed regulation, which greatly reduces the influence of high temperature and humidity during cutting. And it adopts imported AC motor and has its own cooling fan, which has the characteristics of continuous operation under high heat conditions..
  • 5.【Detailed Instructions】This machine comes with a detailed manual and you can refer to the cutting data when us....
Check Stock

6 pcs Step Drill Bit Set HSS Unibit Step Drill Bit and Automatic Center Punch Double Cutting Blades Hex Shank Step Bits for Metal with Aluminum Case

  • 【Double cutting blades】 Our step drill bit features a double cutting blades design, provides a smoother cut with rapid chip evacuation, making it easier to dislodge particles from the material. The 118° tip design enhances cutting speed and increases wear resistance while preventing tool walking..
  • 【HSS】 The step drill bit set is made of high speed steel, wear resistant and corrosion resistant to extend the life of the step bit..
  • 【Automatic center punch】 The carbide tip makes the center punch stronger. Knurling design on the surface makes it easy to prevent slippage..
  • 【What you get】 Our unibit step drill bit set includes 5 standard drill bits and an automatic center punch that can be used to machine 50 diameters of holes for metal, wood, plastic sheet and other materials, greatly increasing work efficiency. Our set includes 1 x 6 step bit (1/4" shank.
  • 3/16" - 1/2"), 1 x 13 step bit (1/4" shank.
  • 1/8" - 1/2"), 1 x 10 step bit (3/8" shank.
  • 1/4" - 1-3/8"), 1 x 12 step bit (3/8" shank.
  • 3/16" - 7/8"), and 1 x 9 step bit (3/8" shank.
  • 【Safe storage】 The step drill bit set comes with a custom aluminum case, sturdy and durable, easy to store and carry..
Check Stock

BOSCH BPT12M125 12mm - 1.25 High-Carbon Steel Metric Plug Tap

  • Metric plug taps – engineered for cutting right-hand internal metric threads, these taps are ideal for cutting internal threads in import cars, motorcycles and machinery.
  • Heat-treated carbon steel – provides superior durability and speed.
  • Rolled threads – deliver more accuracy and are cleaner than machined threads.
  • Package dimensions:0.437"L x 1.5"W x 5.875"H.
Check Stock

PENSON & CO. 5/8

  • Clamp a wide range of workpieces securely to the table while machining, milling or drilling.
  • Made of high grade steel and all the blocks, bolts, nuts and hold-downs are case hardened..
  • Racks can be bolted to the wall or side of machine for easy access. Best among mini clamps press tool sets.
  • This machine clamping kit provides a variety of add-ons to fully utilize Central Machinery's two speed variable bench mill/drill machine.
  • Include a variety of flange nuts, tee nuts, step blocks, coupling nuts, studs and hold down bars to fit almost any machine clamping need.Description58Pc Deluxe Steel Clamping Kit 5/8" T-Slot 1/2"-13 Stud-Size for Bridgeport Mill.
  • Compatible with all Bridgeport and Bridgeport type machines.
  • Well-organized set with each tool having it's slot.
Check Stock

Matework M35 Cobalt Step Drill Bit Four Spiral Flute Step Bit 1/4 -1-3/8 Wear-Resistant TiAlN Coated 3/8 Hex Shank Unibit for Metal Wood Stainless Steel Plastic 19 Size

  • FOUR FLUTE STEP DRILL BIT - Ordinary step drills are prone to deflection during cutting, but four Flute step drill are more stable in cutting. The service life is twice as long as that of ordinary step drills, the drilling accuracy is significantly improved, and the cutting speed is faster when drilling, which has a unique effect on stainless steel drilling..
  • M35 COBALT HSS - M35 cobalt HSS can obtain high hardness (HRC 64-66), high red hardness and high wear resistance through proper heat treatment. Its toughness and bending strength are higher than ordinary high-speed steel, and it is better for hard materials..
  • TiAlN COATING - As a new coating material in the past two years, TiAlN coating has excellent characteristics such as high hardness, high oxidation temperature, good thermal hardness, strong adhesion, small friction coefficient, and low thermal conductivity..
  • 135°CUTTING ANGLE - The increased angle of the drill tip is more suitable for drilling hard materials than 118°. The larger the included angle, the smaller the self-wear and the larger the stress area..
  • TIPS - Due to high-speed rotation, the temperature of the drill bit will continue to rise. It is recommended to add cutting oil or spray water to cool down when working continuously, which....
Check Stock

Matework M35 Cobalt Step Drill Bit Set Four Spiral Flute Step Bit 1/8 -7/8 Wear-Resistant TiAlN Coated 1/4 Hex Shank Unibit for Metal Wood Stainless Steel Plastic 3Pcs 20 Size

  • FOUR FLUTE STEP DRILL BIT - Ordinary step drills are prone to deflection during cutting, but four Flute step drill are more stable in cutting. The service life is twice as long as that of ordinary step drills, the drilling accuracy is significantly improved, and the cutting speed is faster when drilling, which has a unique effect on stainless steel drilling..
  • M35 COBALT HSS - M35 cobalt HSS can obtain high hardness (HRC 64-66), high red hardness and high wear resistance through proper heat treatment. Its toughness and bending strength are higher than ordinary high-speed steel, and it is better for hard materials..
  • TiAlN COATING - As a new coating material in the past two years, TiAlN coating has excellent characteristics such as high hardness, high oxidation temperature, good thermal hardness, strong adhesion, small friction coefficient, and low thermal conductivity..
  • 135°CUTTING ANGLE - The increased angle of the drill tip is more suitable for drilling hard materials than 118°. The larger the included angle, the smaller the self-wear and the larger the stress area..
  • TIPS - Due to high-speed rotation, the temperature of the drill bit will continue to rise. It is recommended to add cutting oil or spray water to cool down when working continuously, which....
Check Stock

CORMAC CQ480 walk behind concrete floor saw max 20 blade 13Hp gasoline engine and water tank INCLUDES 1 x 20 CONCRETE BLADE

  • Cutting depth max: 16", blade diameter max: 9".
  • Cost-efficient cutting method with the unique Cut-n-Break method you can work your way through the material step-by-step at a low tool cost.
  • Exceptional cutting depth: The long body and double cutting blades allow you to make cuts up to 16" Deep.
  • Perfect for flush cutting: The adjustable blade guard allows close cutting to walls and floors.
  • Ergonomically designed rear handle: power cord inlet located underneath the handle enables ease of use and comfortable handling with hassle free....
Check Stock

OEM Upgraded GE Genteq Carrier Bryant Payne 1/4 HP 230v Condenser Fan Motor 5KCP39EGS070S

  • High Working Efficiency: Runs at 3 HP, with a maximum speed of 3450 RPM, synchronous speed: 3600 RPM, Voltage: 115/230V 60 HZ, Frame: 56. Shaft Diameter: 5/8" (1.6cm), Shaft Length: 1.88" (4.8cm)..
  • Powerful AC Motor: Compact and small sized AC motor featuring output 3HP, 56 Frame and single phase. Robust and reliable metal material shell protect the inner circuit from thermal overloading..
  • Open Dripproof Fan: Big fan at one end cools the motor in hours' running, even in dusty or damp environments. Reducing energy costs or overheads, reducing running temperature, increasing winding lifetimes..
  • Wide Application: The electric motor is suitable for air compressors, medical equipment refiners, metal cutting machine tools, pumps, fans, transport machinery mixers, food machinery, etc..
  • Please note" Mophorn is a sub-brand of VEVOR", You can buy our air compressor motor without worries. Do not hesitate to contact us if you have any problem..
Check Stock

Farming Simulator 19 - PlayStation 4

  • The biggest step forward for the Farming Simulator franchise, offering the most striking and immersive graphics ever.
  • Use and drive hundreds of faithfully reproduced farming vehicles and tools from well-known brands, including for the first time the largest agricultural machinery company in the world: John Deere.
  • Tend to your livestock including pigs, cows, sheep, chicken, and for the first time, horses.
  • Ride your own horses, and explore the vast areas offered in huge open worlds loaded with farming activities.
Check Stock

SPEEDWOX Mosaic Nippers 8 Tile Nippers with Strong Plastic Breaker Bar Scoring Wheel for Cutting Porcelain Ceramic Mirror Professional Glass Cutters Score Tile Tool Heavy Duty Fathers Day Gifts

  • 【DESIGN】 Please note that the cutting wheel can be scrolled and plastic breaker bar is not fixed. High leverage design for maximum gripping strength. Bi-color TPR ergonomic handles for anti-slip and comfort grip. The spring action reduces hand and wrist fatigue for easy tiling project..
  • 【HOW TO USE】 Step 1: Place the tiles on a flat surface. Then use the cutting wheel scratch the tile. Step 2: Put the clamp portion of this mosaic nipper on the top and it will snap the tile. Step 3: Break the tile into two pieces..
  • 【USAGE】 The tungsten carbide cutting wheel can be perfectly used for cutting glass tile(not included polished tile), porcelain, mosaic, wall & floor ceramic, stained glass & mirror easily and quickly. Ideal for fixing broken tiles and some special cutting in the corner..
  • 【SPECIFICATION】 210 x 56.5 x 20.3 mm / 8.2 x 2.2 x 0.8". Max cutting thickness approx.9.5mm (0.37"). Wheel diameter: 15mm (0.59")..
  • 【ANTI-RUST OIL】 The anti-rust oil may be appeared on the pliers, it can protect the pliers from rusting. It's not dirty or used products, you can clean it with a towel and it will not effect the function..
Check Stock

Farming Simulator 19 - Xbox One

  • The biggest step forward for the Farming Simulator franchise, offering the most striking and immersive graphics ever.
  • Use and drive hundreds of faithfully reproduced farming vehicles and tools from well-known brands, including for the first time the largest agricultural machinery company in the world: John Deere.
  • Tend to your livestock including pigs, cows, sheep, chicken, and for the first time, horses.
  • Ride your own horses, and explore the vast areas offered in huge open worlds loaded with farming activities.
Check Stock

Shars 4 Pieces 60 Degree HSS Dovetail Cutter Set 404-1620 P}

  • Cutting diameter: 3/8", 1/2", 3/4", 1-3/8".
  • Designed to take the place of arbor and threaded hole type cutters.
Check Stock

Farming Simulator 19 - Windows

  • The biggest step forward for the Farming Simulator franchise, offering the most striking and immersive graphics ever.
  • Use and drive hundreds of faithfully reproduced farming vehicles and tools from well-known brands, including for the first time the largest agriculture machinery company in the world: John Deere.
  • Tend to your livestock including pigs, cows, sheep, chicken, and for the first time, horses.
  • Ride your own horses and explore the vast areas offered in huge open worlds loaded with farming activities.
  • Please contact Maximum Games for any errorr or issues with Setup..
Check Stock