Reviews Steering Tool

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
  • This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
  • Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
  • Compresses locking plate spring to allow removal of retaining clip.
  • Allows access to turn signal switch and SIR modules on current GM vehicles.
  • Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
  • Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • EASY STORAGE: Heavy-duty 12.6” x 2.25”....
Check Stock

JYAU RZR Steering Wheel Puller Tool for Polaris UTV XP1000 Turbo

  • Steering Wheel Puller Tool is a must have for race teams and recreational riders. Made from billet aluminum construction, a heavy duty center bolt for maximum leverage and socket head allen screws for outer edge pressure..
  • Compatible Replacement for Polaris RZR UTV XP1000 Turbo with the 2 threaded holes steering wheel - DOES NOT fit 2018+ XP Turbo S with Sparco steering wheel..
  • This Steering Wheel Puller Tool is designed for Polaris Vehicles with the 2 threaded holes in the OEM steering wheel. We recommend you pop the center steering wheel cover off to verify that your steering wheel has the 2 holes..
  • Usage Method - Heavy duty center bolt for maximum leverage Socket head allen screws for outer edge pressure Screw it to the threaded holes in your stock steering wheel and then tighten the center screw..
  • 1-Year Warranty - This Steering Wheel Puller Tool comes complete with a 1-Year Warranty. If the puller tool ever fails on your Polaris RZR UTV XP1000 Turbo within the period, simply contact us for a replacement. Save time and money by taking advantage of this ..
Check Stock

wonofa 15\ Steering Wheel Holder Alignment Adjustable Car Steering Alignment Tool Fit for Cars Trucks

  • 15 inch steering wheel tool used for fixing steering wheel position, fits for most of auto.
  • The steering wheel alignment tool can be adjusted the height by pressing the locking switch, more convenient to use.
  • Steering wheel holder tool has a loaded spring to fit a wide variety of , trucks etc..
  • The steering wheel holder made of plastic and iron.
Check Stock

ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

  • [Car Maintenance Made Easy]: When removing harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys, depend on the ABN 13 Piece....
  • [Even Application]: No need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts.
  • [Built to Last]: Steering wheel puller kit bits are hardened and tempered to ensure longevity and strength.
  • Machine precision flywheel puller tool....
  • [Fit for Your Tool Kit]: Wheel puller set includes (1) floating swivel, (2) 5/16 by 4 inch (7.9mm x 101mm) bolts, (2) 1/4 by 3 inch (6.3mm x 76mm)....
  • [Blow-Molded Case]: Steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure....
Check Stock

ATPEAM Car Steering Wheel Puller | Automotive Steering Wheel Compressor Remover Set | Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • Built to Last: Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • Function: Remove steering wheels of most vehicles with or without telescoping tilt steering columns.
  • Use to apply equal pressure so you can safely remove steering wheels, Perfect for the home or professional mechanic.
  • Tips: We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • Various Steer Wheel Cap Screws: Includes 4 sets of cap screws to be used for various thread requirements. Size of Cap Screws: M8-1.25 X 90 Mm, 3/8"-16 X 3-1/2", 5/16"-24 X 3-1/2", 5/16"-18 X 4".
  • Package Includeds: This steering wheel removal kit includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements and a carrying case for your convenience.
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock

PMD Products 14-1/2\ Steering Wheel Holder Stand Fix Tool for Front End Wheel Alignment

  • Holder is 15-5/8" (370mm) tall, 7-3/4" (195mm) wide and 8" (200mm) length (along the steering wheel direction).
  • Spring loaded adjuster to apply required pressure to wheel to keep it in place during front end alignment adjustments.
  • Plastic rollers hold firm against steering wheel while making no marks on the steering wheel (safe for glossed wood wheels) Tool weighs 1.8 lbs.
  • Steering wheel holder made of steel and plastic.
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case - 648605

  • Made to be the most reliable tools in the market today.
  • Tool set for removal and installation of power steering pump and alternator pulleys.
  • For use on most power steering pump pulleys.
  • Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve.
  • Kit 20 includes 14-Piece for removal and installation of the power steering pump and alternator pulleys.
Check Stock

Steering Wheel Level Alignment Tool

  • The Steering Wheel Level tool is used to assure a level steering wheel during any front end alignment procedure..
  • Steering Wheel Holder to hold steering wheel in level position..
  • Features a level bubble to show horizontal position..
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock

Powerbuilt 648468 Tie Rod and Ball Joint Separator Silver 15/16 in.

  • For separating ball joint from steering knuckle.
  • Drop-forged, heat-treated alloy steel wedge tool.
  • Separates ball joint from steering knuckle.
Check Stock