Reviews Steering Column Repair Kit

LMC5 Module - C5 Corvette steering column lock bypass module

  • The LMC5 bypasses the steering column lock system in 1997-2004 Corvettes. Eliminates Pull Key and Service Column Lock messages and the 2 mph fuel....
  • Important: We have 3 different LMC5 kits available: LMC5 - If your steering wheel turns freely. LMC5 and Unlocker Combo - If your column lock system....
  • The LMC5 installs in the passenger footwell, requiring no steering column access or disassembly. Detailed instructions with color photos are included.....
  • Only two tools are needed for the installation - 1/4 and 5/16 wrenches. Our LMC5 and Unlocker and Tool Kit Combo includes them. Please note: 2001-2004....
  • U.S based toll-free phone tech support is available 9-5 pst, Mon-Sat, to answer any and all product and installation questions - completely free of....
Check Stock

MLKYCSKE Golf Cart Accessories Steering Column Rebuild 12 Kit fits Club Car DS Gas and Electric Models from 1987-Up, Replaces Part Number 1014216

  • Replaces OEM 1014216, this kit contains everything you'll need to totally rebuild the steering column to get rid of any looseness you might experience. Recommendation: try to use a combination of new and old parts to rebuild the steering system or replace all.
  • Kit contains: Includes 2 Steering Wedges (1014125), 2 Bearing Assemblies (1014213), 1 Steering Snap Ring (1012605), 2) Steering Bearing Seats (1014126), 1 Steering Shaft Seal (1014211), 1 Steering Column Spring (1014217), 1 Steering Retaining Ring (1014214), 1 Top Steering Tube Gasket (1012466), one (1014212) nylon spacer used only in 1987 from serial number A8719-117332 to A8751-135102.
  • Bearings need to be filled with grease before installation, Pay attention to the bearing installation direction. If it is not clear, mark it when disassembling. At the same time, there are installation instructions in the package.
  • MLKYCSKE product well-built: designed to meet or exceed original manufacturing specifications, all product items tested for reliability, durability and performance.
  • Provide you with satisfactory after-sales service, 1-year free warranty on the quality of mechanical parts.
Check Stock

C5 Corvette steering column lock bypass module LMC5 Module with Unlocker and Tool Kit

  • The LMC5 bypasses the steering column lock system in 1997-2004 Corvettes. Eliminates Pull Key and Service Column Lock messages and the 2 mph fuel....
  • Important: We have 3 different LMC5 kits available: LMC5 - If your steering wheel turns freely. LMC5 and Unlocker Combo - If your column lock system....
  • The LMC5 installs in the passenger footwell, requiring no steering column access or disassembly. Detailed instructions with color photos are included.....
  • Only two tools are needed for the installation - 1/4 and 5/16 wrenches. Our LMC5 and Unlocker and Tool Kit Combo includes them. Please note: 2001-2004....
  • U.S based toll-free phone tech support is available 9-5 pst, Mon-Sat, to answer any and all product and installation questions - completely free of....
Check Stock

LMC5 Module with Unlocker - C5 Corvette steering column lock bypass module and unlocking device

  • The LMC5 bypasses the steering column lock system in 1997-2004 Corvettes. Eliminates Pull Key and Service Column Lock messages and the 2 mph fuel....
  • Important: We have 3 different LMC5 kits available: LMC5 - If your steering wheel turns freely. LMC5 and Unlocker Combo - If your column lock system....
  • The LMC5 installs in the passenger footwell, requiring no steering column access or disassembly. Detailed instructions with color photos are included.....
  • Only two tools are needed for the installation - 1/4 and 5/16 wrenches. Our LMC5 and Unlocker and Tool Kit Combo includes them. Please note: 2001-2004....
  • U.S based toll-free phone tech support is available 9-5 pst, Mon-Sat, to answer any and all product and installation questions - completely free of....
Check Stock

Dorman 905-101 Steering Column Shift Mechanism Compatible with Select Models

  • Direct replacement - this steering column shift mechanism is designed to match the original components required to repair the steering column on specified vehicles.
  • Restores functionality - reliable replacement for an original mechanism that has failed due to wear or collision damage.
  • Durable construction - this mechanism is made from quality components to ensure reliable performance and a long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 905-120 Steering Column Shift Mechanism Compatible with Select Models

  • Direct replacement - this steering column shift mechanism is designed to match the original components required to repair the steering column on specified vehicles.
  • Restores functionality - reliable replacement for an original mechanism that has failed due to wear or collision damage.
  • Durable construction - this mechanism is made from quality components to ensure reliable performance and a long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

APDTY 112837 Flexible Rubber Steering Column Coupler (Stops Click/Clunk Noise)

  • Brand New Steering Column MDPS (Motor Driven Power Steering) Repair Coupler Bushing.
  • For Use With Hyundai Kia TSB Technical Service Bullet 14-ST-002-1.
  • See Compatibility Chart To Verify Your Specific Vehicle Year, Make, & Model.
  • Premium Quality Rubber For Long Trouble Free Life.
Check Stock

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
  • This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
  • Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
  • Compresses locking plate spring to allow removal of retaining clip.
  • Allows access to turn signal switch and SIR modules on current GM vehicles.
  • Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
  • Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • EASY STORAGE: Heavy-duty 12.6” x 2.25”....
Check Stock

Allstar-ALL52132 Steering Shaft Support, Spherical Rod End, 3/4-16 in Right Hand Male Thread, Oversized, Jam Nut, Steel, 3/4 in Steering Shaft, Kit

  • Steering Shaft Support, Spherical Rod End, 3/4-16 in Right Hand Male Thread, Oversized, Jam Nut, Steel, 3/4 in Steering Shaft, Kit.
  • Mounts to steering column bracket to hold steering shaft in place.
  • Kit includes one rod end and two steel 3/4 " rh jam nuts.
Check Stock

Hot Rod 32 Inches Tilt AT Automatic Style Steering Column Mounted Shifter Compatible with Chevy GM 55-59, Stainless Steel, Polished Chrome

  • ▶️ This steering column is compatible with 55-59 Chevy GM, fits automatic transmission models with column shift..
  • ▶️ Polished chrome finish steering column illuminated PNRD12 display. GM wiring harness with 4-1/4" male connector..
  • ▶️ It is constructed of durable 304 Stainless Steel column and billet shifter arm to ensure a long lasting life..
  • ▶️ Comes with functioning tilt, turn signals and hazard lights. No ignition switch in column..
  • ▶️ Column Length: 32" | Column Diameter: 2" | Output Shaft: 1"DD | Steering Wheel Spline: 3/4" X 36.
Check Stock

Hot Rod 30 Inches Tilt AT Automatic Style Steering Column Mounted Shifter Compatible with Chevy GM 55-59, Stainless Steel, Polished Chrome

  • ▶️ This steering column is compatible with 55-59 Chevy GM, fits automatic transmission models with column shift..
  • ▶️ Polished chrome finish steering column illuminated PNRD12 display. GM wiring harness with 4-1/4" male connector..
  • ▶️ It is constructed of durable 304 Stainless Steel column and billet shifter arm to ensure a long lasting life..
  • ▶️ Comes with functioning tilt, turn signals and hazard lights. No ignition switch in column..
  • ▶️ Column Length: 30" | Column Diameter: 2" | Output Shaft: 1"DD | Steering Wheel Spline: 3/4" X 36.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock