Reviews Steering Boot

DTA 50195-2 Front Complete Strut Assemblies With Springs and Mounts Compatible with Nissan Sentra 1.8L 2014-2019 Front Left and Right

  • Pre-Assembled Upper Strut Mount: OE-style bearings, SAE-grade nuts and bolts, Superior rubber-to-steel bonding, Plated steel for longer wear, All....
  • Bearing Plate: The new bearing plate helps ensure consistent, precise steering return by eliminating “memory steer. ” Helps eliminate steering....
  • Upper Spring Seat: Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe strut and....
  • Coil Spring: Manufactured from high-quality U. S. steel, each coil spring is precisely calibrated to support the vehicle’s weight and help ensure....
  • Boot Kit: The durable strut boot protects the strut rod and seal from dirt and debris. The premium bumper prevents component damage when the....
Check Stock

Rancho RS55326 RS55328 Set of 4 Front and Rear RS5000X Shock Absorbers with Steering Damper Stabilizer Compatible with Jeep Wrangler Sport X Sahara Rubicon Includes TrendsAuto Decal Sticker

  • RS5000X Front and Rear Shock Absorbers with RS5000 Steering Damper / Progressive Engagement Valving / Tuned Compression Control Valve / Enlarged 2-1/4-inch Twin Tube Body.
  • Gas Pressurization of Shock / 16 mm Nitro-Carburized Rod / Full-Displaced 35 mm Bore / 1-3/8-inch Diameter Sintered Iron Piston / Rebound Bumper.
  • Black, Natural Rubber Bushings / Low-Friction, Self-Lubricating Seal / Protective Boot / Glass-Filled, Fluon Banded Piston / Double-Welded Loops.
  • Steering Damper: Reduce wheel shimmy, bump steer and vibration / Engineered for vehicles with oversized wheels and tires / Twin tube cellular gas design with 5/8" piston / Protective boot included - Protects the shock rod and oil seal.
Check Stock

ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose, Cooling System, Vacuum Hoses Clamping

  • ... Clamps]: Use the ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose Vacuum Hoses Clamping Tool to tighten and secure a CV boot banding strap quickly and easily.
  • [Fits Your Needs]: Use with banding straps up to 10 mm (2/5in) wide.
  • Suitable for ear-type hose clips found on a fuel, cooling, and vacuum hoses and on steering gear gaiters.
  • Compatible with VAG, Opel, BMW, Mercedes Benz, Honda, Mazda, and more.
  • [Easy To Use]: Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip tool nose and through winding mandrel slot.
  • Place 1/2-inch ratchet wrench on winding mandrel.
  • Bend band back over boot and onto clip to apply tension and cut.
  • Fold remaining band tail into clip and secure by tapping down clip ears.
  • [Comfortable Grip]: CV boot clamp tool features a 4.25-inch (10.8 cm) long plastic handle and a 1-inch (2.5 cm) long rubber grips on side levers for ultimate control, less user fatigue, and more productivity.
  • [Built To Last]: Constructed from zinc-plated alloy steel.
  • Standard band clamp crimper banding tool works with the installer’s ratchet and 1/2-inch socket (or included lever) to tighten and hold a band securely until clamped.
Check Stock

Tabazy CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit,

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
  • Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width &....
Check Stock

DPTOOL Ball Joint Separator Kit Heavy Duty Control Arms Steering Knuckles Tie Rod Ends Remover Tool 22mm 24mm 27mm 31mm 36mm Compatible with BMW/Benz/Land Rover

  • ...des W211, W219, W220, and W230. Compatible with Porsche 996 Carrera. Compatible with Audi A4, A6 lower suspension ball joint.
  • Efficient Removal Ball Joint: Specially for quick and easy removing the ball joint connections, removal of tie rod ends, steering knuckles, and lower control arms to replace a ball joint. If you are doing any type of suspension work, this is a essential too. It makes separating ball joints as easy as a snap.
  • Not Damage Ball Joint Boot : Use this tool instead of the pickle fork. This tool is quieter, takes less effort, and most important of all, it does not damage the ball join boot. A must have if you are working on the suspension and have to separate the ball joint but are not planning on replacing it.
  • Easy To Use: lubricated the threads on this separator and applied turns slowly to the driver screw. the ball joint will violently popped out of the steering knuckle.
  • Heavy Duty: This ball joint separator made of heavy duty steel, thick and durable, which could withstand a lot of potential energy without breaking. and we offer 12 mon....
Check Stock

Ear Clamp Pliers with 12pcs Single Ear CV Boot Clamps Band Tool Kit, Ear Clamp Pincer, Ear-Type Clamp Crimp Hand Tool Ear Type CV Joint Axle Boot Clamp Pliers Tool for Auto ATV UTV

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275″ (7mm) in width & 0.023″ (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354″ (9mm) in width & 0.031″ (0.8mm) in thickness..
  • Material: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Function and Use: These clamps are locking secure and tight on drive & CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp..
  • What You’ll Get: 1Pcs Ear Clamps Pliers, 6Pcs Small CV....
Check Stock

Maisto 1-18 1959 Cadillac Eldorado Biarritz 36813

Check Stock

Whitewoods Outlander 139cm Cross Country Ski Set - Snowshoe Grip, Nordic Glide, Brown

  • ...st to your boot size, tighten straps...and Off You Go! Outlander bindings adjust from approximately Women’s shoe size 7 to Men’s shoe size 13, depending on the winter boot used..
  • SKIS: Constructed with a laminated wood core and a durable Lyris sublimated topsheet design. This model features 3/4 metal edges and a steering groove that provides a stable grip and glide in icy or packed powder conditions. New wider 129-109-127 profile with a tip rocker that floats higher in the snow column to mimic snowshoe flotation. A new positive wax-less die-cut base and moderate camber provides better grip..
  • BINDINGS: Pre-mounted to the skis with three M6 snowboard inserts for a secure mount..
  • POLES: Appalachian 2-piece telescopic, 4-season poles -- 6061 aluminum, telescopic from 115cm to 140cm and includes a snow basket and rubber walking tip, with carbon steel point. One “Fast-Lock” makes the length adjustment easy. Dual density rubber grip and adjustable strap of neoprene and nylon combines for ergonomic comfort..
  • One length (139cm) fits most skiers, up to 230 lbs. Great option for rentals, group tours, beginners, ice fisherman, seasoned skiers & school programs..
Check Stock

Diono Excurze Baby, Infant, Toddler Stroller, Perfect City Travel System Stroller and Car Seat Compatible, Adaptors Included Compact Fold, Narrow Ride, XL Storage Basket, Yellow Sulphur

  • NARROW RIDE FOR THE CITY Super narrow ride (only 21" / 53cm) and inline wheels to navigate sidewalks, downtown cafés and subways with ease..
  • EXPANDABLE SEAT UNIT Designed to be small on the outside and big on the inside with a 3-position adjustable hood height, and a seat that will expand with your growing child..
  • SECURE ONE HAND PUSH Designed with a secure tether strap and all-round suspension for easy, one-handed steering and ultimate maneuverability through busy sidewalks..
  • FOLD 'N FLIP REVERSIBLE SEAT Our fold 'n flip seat can be switched between world and parent-facing in seconds, and features multiple recline positions for complete baby comfort..
  • 2-IN-1 ALL-SEASON PROTECTIVE BOOT Every excurze comes with a 2-in-1 protective boot that easily converts from stroller boot to carrycot apron with one simple zip. Made from showerproof material and suitable for all weather conditions..
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • ◇ CV Boot Clamp Pliers : Use with any banding up to 2/5-inch (10mm) in width.
  • Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the....
Check Stock

Rottefella BC-Auto Back Automatic Step-in Ski Bingings (700176-15)

  • COMPATIBILITY - The Rottefella NNN-BC Auto fits all Rottefella NNN-BC soles but DOES NOT accept NNN Touring soles so look for the NNN-BC logo on your boot soles if you are uncertain.
  • STABILITY & STRENGTH - NNN-BC Auto bindings are wider for more stability and stronger than regular NNN bindings to withstand the rigors of off trail skiing.
  • STEP-IN DESIGN - The step-in design has an audible clip when you're locked in and is easily releasable with your ski pole tip.
  • the NNN system hugs your boots while you lay fresh tracks, and lets them go when it's time to spend some time by the fireplace.
  • EDGE CONTROL - Notched grooves optimize power transmission so your skis feel like true extensions of your legs, and a wide platform enhances edge control.
  • STEERING RIDGES - The integrated "Steering ridges" ensure maximum ski control and the flat heel plate provides stability in off-trail situations.
Check Stock

MOOG K3161T Ball Joint

  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
  • KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants.
  • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
Check Stock

Rottefella BC-Magnum Back Ski Bingings with Wide Base Plate

  • Accommodates all boots with Rottefella (No Suggestions) soles, will not accept nan touring or race soles.
  • (No Suggestions) binding is stronger and wider than regular nan binding to added underfoot support and strength to withstand Rigors of back-country skiing.
  • Manual operation for the most secure boot to ski connection.
  • Magnum binding offers wider sole platform for additional support and control for wider skis.
  • Integrated "steering ridges" underfoot deliver maximum control and heel plate is flat for added stability.
Check Stock