Reviews Steel Trailer Light Kit

LINKITOM Trailer Lights Welded Mount Steel Boxes Kit w/6 inch LED Oval Tail Lights & 2 inch LED Red Round Side Lights w/ Grommet wire connectors 2 Pack

  • Trailer Light Kit: includes 2 X Welded Mount Heavy Duty Steel Boxes, 2 X 6" Oval Red LED Trailer Lights w/ Rubber Grommets and wire connector.
  • 2 X 2" Round Red LED lights w/ Rubber Grommets.
  • Steel Trailer Light Boxes: Made by 14 gauge heavy duty steel, protect the LED tailer light effectively. The steel box housing is design of excellent moisture-proof sealed and IP 67 waterproof makes it be definitely waterproof..
  • Super Bright: Led Trailer Lights has bright LED diodes with super high visibility, light up the rear or side of your vehicle or trailer in daylight, midnight, raining or fog days. Improve the drive security and avoid accidents..
  • Brake& Turn Taillight: Function as tail lights, turn/brake lights and side marker light. Fit for heavy truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc.,.
  • Simple Installation: Led trailer lights with black rubber grommet are mounted on the box. wiring them for installation to the corresponding wire on trailer. And then weld on the light box to the trailer frame..
Check Stock

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

  • 4.56″ long x 3.78″ tall x 2.63″ deep.
  • trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
  • 2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
  • For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
  • Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
  • White+ Yellow, front side works and is high brightness.
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

Kohree New LED Submersible Trailer Tail Light Kit, 12V LED Utility Trailer Lights DOT Approval, Fully Submersible License Lights and Wiring Kit Combined Stop,Taillights,Turn Function for Boat Trailer

  • UPGRADE TRAILER LIGHT: Come with additional atomization strip, Kohree submersible brake tail light kit has superior visibility and faster upon activation than other rectangle led trailer taillights. No glare LED, maximizing light output and giving motorists behind you a better indication of when you're braking, turning or reversing and thus boosting their response time..
  • SEALED WATERPROOF TRAILER LIGHT: No screws on the lamp surface IP68 waterproof, built in epoxy encased electronics and a sonically sealed body to prevent water intrusion and definitely submersible. Also, it can effectively resist damage of sand, dust, dirt, snow and other horrible weather..
  • SURFACE MOUNT: With diodes soldered directly to the surface of a circuit board instead of attached with wires in the drilling-hole board, Kohree 12V led trailer lights protect LEDs from shock and vibration better than through-hole technology. Simply to use..
  • DOT APPROVAL: Kohree hola boat trailer light kit gives your truck a distinctive look and completely street legal, perfect replacement low profile trailer lights for under 80 Inch width towing vehicle, like boat trailer, RV, camper, tractors, canoes, truck, trailer, bus, Lorry, Van, caravan, snowmobile etc..
  • FULL SERVICE TRAILER LIGHTS KIT: This ut....
Check Stock

LIMICAR LED Trailer Lights Kit, Submersible Square Stop Turn Tail Trailer Light Kit, Red/Amber Trailer Marker Lights, 3rd Brake ID Light Bar for Utility Trailer Truck Boat RV Camper Snowmobile

  • BRIGHT LIGHTING: This LED Trailer Lights Adopts 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light.
  • 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light with license plate lamp.
  • No glare, much brighter and more energy-efficient than halogen bulbs. Side lens lights and side marker lights are all LED lights as well. Ultra bright but energy-efficient..
  • PACKAGE INCLUDES: Includes 2 Square LED Trailer Light Kit, 4 Amber 2 Red Fender Marker Lamps, 11LED 3rd Brake Identification Light Bar, 25ft Trailer Wiring, License Plate Bracket, Mounting Hardware..
  • PRACTICAL FUNCTIONS: LIMICAR Trailer Lights LED Kit Functions as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar..
  • WATERPROOF: IP67 Waterproof. This Trailer Light Kit is completely sealed. Adopts welding technology for better waterproof performance. The screws have been removed from the lampshade to prevent water invasion better, effectively protects the tai....
Check Stock

ZXFOOG Rubber Trailer License Plate Bracket-Trailer/Truck License Plate Light Bracket and License Plate Frame Carbon Fiber ,Universal Front Bracket for Boat Trailer with Stainless Steel Plate Screws

  • 【Heavy Rubber Trailer Bracket】: All the hardware included in the kit is shown in the first picture. If the package you receive is missing the relevant hardware, please feel free to contact us for a free replacement.Rubber Trailer License Plate Bracket designed for replacing your Plastic license plate bracket or Aluminum license plate bracket, Prevents loss of trailer/truck license plate. Let the license plate bracket with light last longer.
  • 【Durable Trailer License Plate Bracket】: Black multiply fabric reinforced neoprene rubber license plate bracket for boat trailer,Flexible, durable, corrosion proof, tear proof, fatigue proof, cold temperatures, good UV resistance and long lasting,Replaces flimsy plastic, rigid steel and aluminum holders.
  • 【Carbon Fiber License Plate Frame】: The perfect Match Plate Frame Carbon Fiber (thick plastic license plate frame), matched with 4 carbon fiber plate license plate screws, makes your Trailer / Truck back or front trailer license plate bracket more beautiful.
  • 【Trailer Bracket Easy Installation】: 32PCS stainless steel trailer license plate bracket screws, no need to be purchased by dealers, Rubber Trailer License Plate Bracket can easily mounts to 2" hole pattern on lamp assembly, Standard size for almo....
Check Stock

BGGTMO Trailer License Plate Bracket Holder- ATV/RVs/Boat/Jet Ski Utility Trailer Metal Car Tag Frame and Black Aluminum Cover Mounting Kit with Screw Caps

  • Trailer License Plate Holder- The aluminum metal trailer light bracket is designed for replacing your plastic trailer license plate light holder, prevent damage and loss of your utility boat trailer, PWC, Snowmobile, ATV, Jet ski, RVs license plate, make the trailer frames last longer..
  • Flexible Trailer License Plate Mount- Sturdy thickness aluminium to keep strong and No bending easily, ensure no rusting and longer years lifetime. The installation size for the bracket is from 1-5/8" to 2-1/2", and the installation size for the license plate is from 4" to 8-5/8", suitable for license plate locks of various models, such as trucks, trailers, motorcycles, etc..
  • Black Aluminum License Plate Frame- The matte black license plate cover adopts rustproof aluminum, smooth and high gloss surface. 1.3mm thickness, strong and durable. The four-corner round design will not scratch your hands. Heavy duty metal license plate frame, with black screw cap, is suitable for the front or rear license plate of various colors of cars.
  • Easy To Install- Our trailer plate bracket kit matches with license plate light of size 2"....
Check Stock

12v Magnetic Towing Tow Light Kit Trailer Rv Tow Dolly Tail Towed Car Boat Truck

  • Complete Trailer Light Kit: This Trailer Light Kit includes 2 combination tail and brake/turn signals lights, 2 amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag, everything you need to do the install included..
  • IP68 Waterproof and Submersible trailer lights: The circuit board is completely sealed and IP68 waterproof, which protects the board from short circuit even soak in the water, it can work long hour in rainy days, fog day or snow day, it is totally submersible(Test Underwater light for 24 hours)..
  • High Visibility LED Trailer Tail Lights: Super clear and brighter SMD 5050 lamp beads with Halo Glow design produces a super fashion light, no glare, Up to 50,000 hrs life expectancy.
  • Compliant with DOT standards, perfect replacement trailer lights for RV, tractors, canoes,towing vehicle, truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile etc.
  • 25ft wiring harness, so that it is long enough to reach end of trailer,instruction included and 1 year warranty..
Check Stock

ONLTCO 12V Red Led Square Submersible Trailer Lights, Turn Signal License Brake Tail Light Kit for Under 80 Inch Boat Camper RV Trailers Shorelander Marine, IP68 Waterproof, DOT

  • ✅KIT INCLUDE: 2 Pcs Trailer Lights build in with License Plate Light, Turn Signal Light, Tail Light and Stop Light.
  • 2 Pure Copper Wires: Long Wire is 21.75ft, Short Wire is 4.05ft.
  • 1 Pc License Plate Bracket with lengthened mounting holes makes adjustable when installing license plate and a bag of mounting hardware.
  • ✅COMPLETE SUBMERSIBLE: We sank the light into the lake under 65ft for half an hour, then picked it up and the lights works well. Water-proof IP68, Sealed & Waterproof assemblies, engraved panel makes LED condense, and the light brighter. Please make sure wiring connect correctly.
  • ✅MATERIAL: Accessory Wires is 100% Copper Wires.
  • License Plate Bracket made from Polypropylene Plastic.
  • Trailer Lights’ tail light surface and turn signal light surface made from Polycarbonate Plastic with Reflective Function, it's safer to use in the dark. License Plate Light surface made from Acrylic Plastic,with crystal-like transparency, and the light is soft and clear.
  • and black shell is made from Polypropylene Plastic. Screws and nuts on the lights are made from 304 Stainless Steel.
  • ✅ALL LED: The lights are all led, 12 LEDs in trailer light surface, 4 LEDs in license plate light surface, 1 LED in turn signal Light surface. Complies with DOT standa....
Check Stock

Linkitom New Submersible LED Trailer Light Kit Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Over 80 Inches

  • HALO Trailer Light Kit : Trailer tail light kits has everything you need, includes two stop turn LED tail lights(Unique halo glow and solid light....
  • IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of....
  • Compliant with DOT approved standards: The lamp shade of utility trailer light kit with corrosion resistant ABS material, 100% compliant with DOT....
  • 25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in....
  • Widely Used: Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure....
Check Stock

Carrep Submersible Square LED Trailer Lights Kit Waterproof 12V Utility Red LED Stop Turn Tail License Brake Running Light Lamp Under 80' Boat Trailer DOT Compliant

  • Widely Application + DOT Certification⭐ Designed for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc. The LED trailer tail Lights Serves 7 functions: Stop/Turn/Tail/Rear reflector/side reflector/side marker light/ license plate light..
  • All-in-one Kit⭐Trailer tail light kits has everything you need, with 1 Pairs trailer Lights + 2 gaskets + 2 amber clearance lights + one 22 feet and one 4 feet wiring harness + 1 license plate bracket + 4 reflective sticker + some screws..
  • Completely Sealed and Waterproof⭐ No screw on the lamp shade.Submersible Led Trailer Lights's lens and housing are completely welded together, The circuit board of tail light is seal..
  • High Visibility LED⭐ All diodes are LED, NOT Any incandescent bulbs! High Brightness LED Combination tail lights last more 30-40 times than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. It saves you time and money..
  • Installation Tips⭐Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Product Description or User manual. Gifts for dad men him..
Check Stock

MAXXHAUL 50520 12V LED Compact Submersible Trailer Light Kit for Vehicles Under 80 Inches

  • Our trailer light kit has multiple useful functions such as for stopping and turning, as a tail light, as a rear or side reflector, as a side marker light, or as a license plate light..
  • Wiring harness is made from 18 gauge 100% pure copper wire to ensure a reliable and long-lasting product that remains effective even underwater..
  • Designed with LED instead of incandescent lights, further adding visibility and providing a much more energy efficient product..
  • Our product is sealed with sonic welding technology to prevent any liquid or debris from entering and to secure the trailer lights while being used underwater..
  • The compact size of the trailer lights provides further portability and the attachable bolts guarantees easy installation on either the rear or the side of your vehicle..
  • Our trailer light kit is compatible with towing vehicles such as boats, trailers, trucks, etc. that are under 80 inches..
  • PLEASE SCROLL DOWN AND BROWSE OUR A+ PAGES FOR MORE PRODUCT INFORMATION..
Check Stock

LINKITOM Submersible LED Trailer Light Kit, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Under 80" Inch

  • Trailer Light Kit : Led boat trailer light kits has everything you need,includes two stop turn signals LED marker lights, two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker..
  • IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards..
  • Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards.
  • 25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and durable for the long term..
  • Widely Used : Widely applicable to 80 Inch wi....
Check Stock