Reviews Steel Taper Impact Dies

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

• ...1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
• Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
• Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
• BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
• Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
• EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
• Each compartment is labeled with sizing for simple identification.
• PACKAGE CONTENTS: Combination set contains both metric taps and dies.
• Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
• (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).

Redding 9mm Luger Taper Crimp Die Straight Wall Case

• A taper crimp gently tapers tighter and tighter to hold the bullet in place.
• This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length.
• Redding Taper Crimp Dies are designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable.
• Available for some revolver cartridges for those who prefer the uniformity of a taper crimp.
• The die has standard threads (7/8" x 14tpi), so can be used on most reloading machines. Case lube is not required on crimp dies.

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric Tools with Carrying Case + Free Glove Amazing Tour

• 110 Piece Combination Tap and Die Set Alloy Steel Metric Tools with Carrying Case + Free Glove Amazing Tour.
• Size:18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal.
• 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.
• Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
• Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.

BSP/BSPP British Standard Pipe Tap and Die Set - 18 Piece

• BSP/BSPP (British Standard Pipe) Tap and Die Set - 18 Piece.
• 1 taper tap, 1 bottom tap and 1 die in each size below:.
• Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14.
• Dies are 1", 1-1/2" and 2" OD Round Dies..

BSP BRITISH STANDARD PIPE BSPP PARALLEL TAP AND DIE SET - 8 SIZE 1/8 TO 1

• BSP/BSPP (British Standard Pipe) Tap and Die Set - 24 Piece.
• 1 taper tap, 1 bottom tap and 1 die in each size below:.
• Taps are 1/8" - 28, 1/4" - 19, 3/8" -19, 1/2" -14, 5/8" - 14, 3/4" - 14, 7/8" - 14, 1" - 11 TPI.
• Dies are 1", 1-1/2" and 2" OD Round Dies..

GMTOOLS 110PCS Tap and Die Set Metric Size Standard Threading Tool Set M2-M18 with Adjustable Handles Accessories and Storage Case Tap & Die Set for Cutting External and Internal Threads

• [High-Quality Materials]: This metric tap set is made of high-quality hardened alloy steel, improving product hardness, wear-resistance, and increasing product service life, durable and superior strength..
• [Excellent Performance]: Suitable for re-threading fasteners and fastener holes, cutting or updating internal and external threads. Fully ground & high-precision tap is sharp for tapping and chip removing operation, running smoothly and efficiently..
• [Versatility]: Tapered Teeth Design starts threading more easily and smoothly, and prevents over-threading. Suit for creating new threads or repairing damaged threads on metals like carbon steel, cast iron, aluminum and stainless steel..
• [Most Common Sizes in Metric]: This tap and die set comes with 110 pieces totally in a storage case. This metric tool set Include: 1) 35 pcs plug taps.
• [Portable Case]: Each tap and dies set is equipped with a iron toolbox which is engraved with corresponding scales. And it’s convenient to store them in the case to prevent dust..

Happybuy 110Pcs Tap & Die Set Tungsten Steel Titanium Tap & Die Metric Tool Tap & Die Combination Set For Cutting External & Internal Threads

• Premium Quality: High-duty heat-treated Tungsten steel construction,  high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
• Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
• Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
• Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
• Most Popular Sizes Included: This tap and die set comes with 110 pieces in total: 35 pcs plug taps, 35 pieces taper taps, 35 pcs dies, 2 tap holders(M2 - M12 (1/16" - 1/2"& M6 - M20 (1/4" - 3/4")), 2 die holders (200mm (1" diameter bore)& 270 mm (1 1/2" diameter bore) and 1 T-bar tap wrench, most popular sizes included.

6PCS/lot Balloons Metal Die Cuts,Balloons Party Festival Invitation Card Cutting Dies Cut Stencils for DIY Scrapbooking Album Decorative Embossing Paper Dies Card Making

• ...ebrating a range of occasions. You'll have the perfect die-cut design to add to your papercraft masterpieces!.
• 【Function】decorations for paper dies cutting for boys for girls best birthday gift Balloon Butterfly Birch Trees Fish Spider Scrapbooking Die Cuts Carbon Steel Stencil Metal Album Card Paper Craft Decoration DIY Template Metal Cutting Dies Christmas Embossing Dies Stencil Template for DIY Scrapbook Album Paper Card Craft Decoration dies on the cowboy dies..
• 【Material】 High Quality Thin Metal Cutting Dies made of 100% Carbon Steel . Highly detailed and delicate.embossing press debossing dies cutting tools and embossing dies for graduation craftsman homemade impress precision cutting dies memory dies scrapbooking border dies occasion greeting card making.Embossing Folders and Stamp Also match in our Eswala store..
• 【Material】 High Quality Thin Metal Cutting Dies made of 100% Carbon Steel . Highly detailed and delicate.embossing press debossing dies cutting tools and embossing dies for graduation craftsman homemade impress precision cutting dies memory dies scrapbooking border dies occasion greeting ca....

AnNafi® MT3 Shank Threading & Tapping attachment-lathe tailstock die holder set | Machine Tools | Lathe Parts & Tool

• ★✔️ AnNafi’s THREADING &TAPPING ATTACHMENT- LATHE TAILSTOCK DIE HOLDER SET -: Made of High Quality Tool Steel , this is a high quality product....
• ★✔️ SIZE &CAPACITY -: Die Holder Sizes 13/16", 1" & 1-1/2”. 2 Tap Chucks Holding Capacity: 0 to 1/4" & 1/4" to 1/2".
• ★✔️ CONTENT -: This comes along with 3 Allen Keys, Tailstock Arbor with #3 Morse Taper. Does not include dies and taps..
• ★✔️ USES -: Used for threading and tapping purpose on the lathe machine. Comes in precisely ground MT3 Shank, that goes inside your lathe....
• ★✔️ SATISFACTION GUARANTEED:- We provide 30 Days full Money Back Guarantee if there is any Manufacturing Defect. So Buy with Confidence..

Klutch Tap and Die Set - 110-Pc.

MT2 Shank Threading & Tapping attachment-lathe tailstock die holder set ATOZ

• 2 Tap Chucks Holding Capacity: 0 to 1/4" & 1/4" to 1/2".

Circle Rectangle Frame Metal Die Cuts,Flower Frame Square Net Card Cutting Dies Cut Stencils DIY Scrapbooking Album Decorative Embossing Paper Dies Festival Card Making

• ...raft projects. This will be perfect for cards celebrating a range of occasions. You'll have the perfect die-cut design to add to your papercraft masterpieces!.
• 【Function】Decorations for paper dies cutting for boys for girls best birthday gift Balloon Butterfly Birch Trees Fish Spider Scrapbooking Die Cuts Carbon Steel Stencil Metal Album Card Paper Craft Decoration DIY Template Metal Cutting Dies Christmas Embossing Dies Stencil Template for DIY Scrapbook Album Paper Card Craft Decoration dies on the cowboy dies..
• 【Material】 High Quality Thin Metal Cutting Dies made of 100% Carbon Steel . Highly detailed and delicate.embossing press debossing dies cutting tools and embossing dies for graduation craftsman homemade impress precision cutting dies memory dies scrapbooking border dies occasion greeting card making.Embossing Folders and Stamp Also match in our Eswala store..
• 【Features】Circle Rectangle Shape, Easy to Use, Durable, Paper Embossing Tool Perfect DIY tool for greeting card, invitation, scrapbook, photo album, etc. Extensive applications - cutting shapes punch cutting dies on for a variety of materials including paper, cardstock, chipboard, specialty paper and more!.

Winsummer Set of 4 Christmas Pillow Covers Buffalo Plaid Snowflakes Merry Christmas Decorative Throw Pillow Cases Cushion Cover 18 x 18 Inch Cotton Linen Autumn Pillow Cases

• ...raft projects. This will be perfect for cards celebrating a range of occasions. You'll have the perfect die-cut design to add to your papercraft masterpieces!.
• 【Function】decorations for paper dies cutting for boys for girls best birthday gift Balloon Butterfly Birch Trees Fish Spider Scrapbooking Die Cuts Carbon Steel Stencil Metal Album Card Paper Craft Decoration DIY Template Metal Cutting Dies Christmas Embossing Dies Stencil Template for DIY Scrapbook Album Paper Card Craft Decoration dies on the cowboy dies..
• 【Material】 High Quality Thin Metal Cutting Dies made of 100% Carbon Steel . Highly detailed and delicate.embossing press debossing dies cutting tools and embossing dies for graduation craftsman homemade impress precision cutting dies memory dies scrapbooking border dies occasion greeting card making.Embossing Folders and Stamp Also match in our Eswala store..
• 【Features】Many Shape, Easy to Use, Durable, Paper Embossing Tool Perfect DIY tool for greeting card, invitation, scrapbook, photo album, etc. Extensive applications - cutting shapes punch cutting dies on for a variety of materials including paper, cardstock, chipboard, specialty paper and more!.