Reviews Steel Structure Factory

Walker Exhaust SoundFX Universal 17842 Universal Exhaust Muffler

  • Stainless steel structure construction –Stainless steel construction possesses greater corrosion resistance. It can maintain its strength at high temperatures and prolong the service life of the muffler..
  • Straight-through noise reduction design–A straight-through designed muffler that eliminates back pressure,noise can be controlled at the same time.Stable structure allows Floshine muffler to be used for a long time ..
  • High-quality– Internal partition wall and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life.
  • Muffler size–2.5”inlet 2.5”outlet| Body Length: 14″| Overall Length: 20″| Body Height: 4″ | Body Width: 9″ | ID or OD: ID.
  • Adaptability-The universal muffler is fit on most vehicles, and only requires clamps or welding for installation..
Check Stock

Floshine Universal Stainless Muffler,3 inch center inlet/3 inch center outlet,Straight-Through Performance Muffler Exhaust FH1219

  • Stainless steel structure construction --Stainless steel construction possesses greater corrosion resistance. It can maintain its strength at high temperatures and prolong the service life of the muffler..
  • Straight-through noise reduction design--A straight-through designed muffler that eliminates back pressure,noise can be controlled at the same time.Stable structure allows Floshine muffler to be used for a long time ..
  • High-quality-- Internal partition wall and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life.
  • Muffler size--3''inlet 3''outlet| Body Length: 14"| Overall Length: 20"| Body Height: 4" | Body Width: 9" | ID or OD: ID.
  • Adaptability-The universal muffler is fit on most vehicles, and only requires clamps or welding for installation..
Check Stock

Floshine Universal Stainless Muffler,2.5 inch center inlet/2.5 inch center outlet,Straight-Through Performance Muffler Exhaust FH1119

  • Stainless steel structure construction --Stainless steel construction possesses greater corrosion resistance. It can maintain its strength at high temperatures and prolong the service life of the muffler..
  • Straight-through noise reduction design--A straight-through designed muffler that eliminates back pressure,noise can be controlled at the same time.Stable structure allows Floshine muffler to be used for a long time ..
  • High-quality-- Internal partition wall and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life.
  • Muffler size--2.5''inlet 2.5''outlet| Body Length: 14"| Overall Length: 20"| Body Height: 4" | Body Width: 9" | ID or OD: ID.
  • Adaptability-The universal muffler is fit on most vehicles, and only requires clamps or welding for installation..
Check Stock

Hooke Road Tacoma Rear Steel Bumper w/LED Lights & D-Rings Compatible with Toyota Tacoma 2005-2015 2nd Gen Pickup Truck

  • Tacoma Rear Step Bumper Compatible with Toyota Tacoma 2005-2015. Not compatible with factory back-up sensors. Bumper weight about 65 lbs..
  • One piece welded design for ultimate strength. Provides excellent rear-end protection..
  • Works with factory receiver hitches. Include mounting holes for license plate and factory license plate lights..
  • Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) for the structure mounting bracket..
  • Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
Check Stock

JGN Trading 12

  • This Bayonet dagger knife looks and feels really strong ,so good ,very Classic and Full of arrogance edge. Collection knife, comfortable feel.You'll get work done in fun?.
  • Great Quality Hunting Knife 440 Stainless Steel Blade Serrated Sawback Design 10 Handle/ Leather Sheath with Belt Loop.
  • A nearly indestructible field knife handle for this level of fixed blade military knife,Stronger than any camping knife or Bowie knife w/ sheath.
  • cryogenic heat treatment & hardens & protects stainless steel blade.
  • 100% Quality Assurance The balanced steel structure ensures long-term operation without erosion, good rust resistance and high durability. It has a high-quality factory sharpening knife. Suitable for: outdoor: survival, camping, sailing, diving, fishing and hunting.
  • Overall Length12" inches Blade Length7.4" inches Handle Length 4.7" inches.
Check Stock

Hooke Road F150 Rear Back Bumper w/Lights & Towing Hooks Compatible with Ford F-150 2006 2007 2008 2009 2010 2011 2012 2013 2014 Pickup Truck (Textured Black Steel)

  • Solid Steel Offroad Rear Bumper Fits for Ford F-150 2006 2007 2008 2009 2010 2011 2012 2013 2014. Not compatible with factory back-up sensors..
  • Accommodates factory hitch receiver. Styled for off-roading. Full-width design maintains full protection. Built-in corner steps for convenient access to the truck bed..
  • Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) for the mounting structure. Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • High strength shackle mounts welded both inside and out with 4.75-ton capacity. Includes 9500 lbs rated,3/4'' D-rings. Includes and 2×18w high power LED floodlights. Equipped with a license plate light..
  • Bumper weight: about 65 lbs. Direct bolt-on installation..
Check Stock

Shelf Bracket,2 Pieces Triangle Shelving Brackets Stainless Steel Sturdy - Wall Brackets Angle Bracket Shelf Support - Silver Scaffold Board Shelf Brackets Corner Holder, With Screws, Save Space

  • ●Heavy duty brackets made of stainless steel, widened and thickened, sturdy structure, excellent corrosion resistance..
  • ●Brushed surface treatment can improve corrosion and rust prevention performance. With countersunk mounting holes and 4mm thick stainless steel, it can be evenly loaded to make it more durable and stable..
  • ●The triangle is the strongest structure in the current wall bracket, which is easy to level and shake off. Provides good stability, detachable design, easy installation..
  • ●The wide range of applications is ideal for kitchens, bedrooms, shops, bookstores, factory shelves, wine racks, open shelves with scaffolding or wooden boards..
  • ●Metal shelf brackets comes with a complete set of mounting accessories for easy installation. (During installation, please keep it level and tighten the screws to avoid loosening.).
Check Stock

Tigeracing Tie Down Anchors+MZS Lifts 2.5 in Front Leveling Kit Compatible with 2007-2021 F250 350 Super Duty 4WD

  • Compatibility: Tigeracing truck bed top side 6½' 8' d ring tie down + MZS 2.5" leveling lift kit front strut spacers compatible with 2007-2021 F250 350 Super Duty 4WD..
  • Strong & Hard : ALL metal (stainless steel + CNC aluminum),NO plastic material,strong power up to 3000 pounds! Aluminum chassis must not crack or break,screws would not push through it. Stainless Bracket(more than 2mm thickness) + 304 Stainless Steel Screws..
  • Perfect Fit & Precise Structure: Professional design,fixed closed,hardly to pop up when pulling.Ring can be pull out easy but NO Rattle !!! Not afraid of being scratched.Fearless of the wind, dust, rain and snow..
  • MZS front leveling lift kit are CNC machined out of billet aluminum.Strong & Anti-Rust.Simple bolt installation.Maintains factory ride quality.Increased ground clearance.Levels the front with the rear of the vehicle..
  • Improve the stance of your vehicle and provide additional fender clearance for larger tires and wheels. A front end alignment back to factory spec is recommend after install..
Check Stock

EPOMAKER Sea Salt Mechanical Keyboard Switches Set, Pre-Lubed Linear Switch with LED Slot, 50g, 35 Pieces for Customizing Keyboards

  • ...er Sea Salt mechanical switches are made with initial force of 35g and end force of 60g. With a total travel of 2.00mm, this switch shows its characteristic to be outstanding. Designed a linear type, it aims at pulling up the smooth typing experience to the full!.
  • 【Factory Lubed】 Coming factory-lubed and special structured, the Epomaker Sea Salt switch can be self-lubed when being typed, which is especially helpful for maintaining a smooth feeling. The durable stem is credited to a more smooth and pleasing typing experience.
  • 【Compatible with MX Structure Keycaps】 Epomaker Sea Salt switches are designed with general MX structure so that they can fit most keycaps sets with (X) cross stem. This greatly improves the compatibility and you can feel free to change the switch and remake your own keyboard.
  • 【Built-in LED Slot & Durable Lifespan】 Equipped with LED slots for modification, the backlight can be shine-through even with PBT housings in the Epomaker Sea Salt switches. This provides more fun feature and options for DIYers. With a strong stainless steel spring, the lifespan can go up to 60 million times of keystrokes based on laboratory durability test. Get your keyboard something new and have fun with them!.
Check Stock

Tigeracing Tie Down Anchors+MZS Leveling Kit 1\ Rear Lift Blocks Compatible with 2015-2020 F250 350 Super Duty

  • Compatibility fits 2015-2020 F250 350 Super Duty, 4 Piece tie downs are for F150 rear holes,B07V35TGV9 and B07V425TTC are for front holes. 2..
  • Strong & Hard : ALL metal (stainless steel + CNC aluminum),NO plastic material,strong power up to 3000 pounds!Aluminum chassis must not crack or break,screws would not push through it. Stainless Bracket(more than 2mm thickness) + 304 Stainless Steel Screws,make it safe and stay on all the time when driving!.
  • Perfect Fit & Precise Structure : Professional design,fixed closed,hardly to pop up when pulling.Ring can be pull out easy but NO Rattle !!! Advanced spray-paint technology not afraid of being scratched.Fearless of the wind, dust, rain and snow..
  • Note: U-bolts are required for installation, U-bolts are NOT included in this kit. Some vehicles are equipped with 2" or 4" rear factory blocks. Lift height will vary based on size of existing block being replaced..
  • Easy installation: MZS leveling kit can be installed in about 1-2 hours, does not require special tools. A front end alignment back to factory spec is recommend after install..
Check Stock

Floshine Universal Mufflers,Single Chamber 2.5 inch inlet/2.5 inch outlet,Performance Automotive Exhaust Muffler FH425109

  • Aluminium construction --Aluminized steel construction and internal drainage system for maximum durability,Internal partitions with the change of temperature, the deformation is reduced by thermal expansion and cold contraction.
  • Noise reduction performance--Super 10 Factory-style using aerodynamics sound absorbs unwanted interior resonance to reduce radiated noise,OE-style domed heads Make the noise lower.
  • High-quality-- Internal partition wall and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life.
  • Performance 2.5''Muffler size--2.5''inlet 2.5''outlet| Body Length: 7"| Overall Length: 13"| Body Height: 4" | Body Width: 9.5" | Inlet: 2.5" ID.
  • Adaptability-The universal 2.5 muffler exhaust is fit on most vehicles, and only requires clamps or welding for installation..
Check Stock

Traxxas 82024-4-Tan TRX-4 Sport: 4wd Electric Truck with TQ 2.4GHz Radio System

  • Traxxas 82024-4 - TRX-4 Sport 1/10 4x4 Crawler RTR, Tan.
  • Features: Tough, Lightweight Pickup Truck Body with Low profile bumpers for increased clearance Trail-Tuned XL-5 HV Waterproof Electronic Speed Control Powerful Titan 21T reverse rotation motor with internal cooling fan Portal Axles: Steel Gears, Improve axle geometry and reduce strain on driveshafts Rigid Steel Frame: 1.5mm thick steel frame rails increase torsional rigidity Drivetrain: Full-time shaft driven 4-wheel drive Innovative Battery Compartment: Hinged b.
  • Includes: (1) TRX-4 Sport RTR (1) Radio System (1) Motor (1) ESC Complete Instruction Manual.
  • Specs: Length: 21.93 Front Track: 9.78 inches Rear Track: 9.78 inches Wheelbase: 12.28" Front & Rear Shock Length: 3.54 inches (90mm) Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Crossmembers Drive System: Shaft Driven 4WD Gear Pitch: 32P Hex Size: 12mm.
  • Part number(s) included (in factory packaging): 82024-4.
Check Stock

HOLYEDGE 9 Heavy Duty Fixed Blade Survival Hunting Knife Wilderness Tactical Camping Essential Tool with Kydex Sheath

  • Packaged include: 1 x Tactical Knife+1X Kydex sheath.
  • Full length: 9inch (23cm),Blade: 3.5inch(9cm),Handle length: 5.1inch(13cm),Weight: 12 ounces.
  • Handle material: Rubber antiskip Handles, Blade Materials: 420HC Stainless Steel, Hardness: 58HRC.
  • 420HC Stainless Steel structure ensures long-term operation without erosion, good rust resistance and high durability. It has a high-quality factory sharpening knife. This may be the best tool in your saber suit or tactical knife case..
  • This knife is very sharp. Please use with care and use with care..
Check Stock