Reviews Steel Shank

Diamond Drill Bit, 5Pcs Hole Opener Drill Bit Electric Power Tool for Vitrified Brick/Stone/Marble/Granite/Concrete/Glass/Ceramic Tiles(12)

  • Universal Shank: With universal shank type, can be installed on lithium electric drills, hand drills, bench drills and other equipment..
  • High Speed Steel: These drill bits are made of excellent high speed steel, with HRC58‑65 hardness, wear resistant and durable..
  • 4Pcs Drilling Tools: Including 3pcs step drill bit and a center punch, commonly used for woodworking grooving, drilling and cutting, etc..
  • Multiple Specifications: The step drill can be used to drill holes of different specifications without changing the drill bit, which is convenient and practical..
  • Applicable Plates: Burr free reaming, suitable for stainless steel, carbon steel, iron plate, aluminum plate, plastic plate, etc..
Check Stock

Husky 67123H 7-Piece Precision Screwdriving Set for Jewelry and Electronics w/ Swiveling End Cap and Ergonomic Composite Handles

  • 7 PHILLIPS HEADS: 2 x #0 (1.5”, 2.5” shank), 1 x #1 (3” shank), 3 x #2 (4”, 6”, 8” shank), 1 x #3 (6” shank).
  • 8 SLOTTED HEADS: 1 x 1/8“ (2.5” shank), 3 x 3/16” (4”, 6”, 8” shank), 2 x 1/4“ (4”, 6” shank) 2 x 5/16” (6”, 8” shank).
  • IDENTIFICATION MARKINGS are molded into the handles, so you’ll be able to quickly pull the correct tool from your bag or belt.
  • DUAL MATERIAL HANDLE allows for an easy grip. The textured material will give you precise handling, even in slippery conditions.
  • HEAT TREATED STEEL ALLOY prevents cam out when tightening fasteners on the jobsite.
Check Stock

Driak 6pcs HSS Screw Countersink Drilling Bits M3-M10 Combination 1/4\ Hex Twist Tap Drill Dit Set

  • 6PCS Hex Shank High Speed Steel Spiral Screw Thread Taps Drill Bits Set.
  • Suitable for soft tapping metal, aluminum, iron.
  • Complete hole drilling, tapping, deburring and countersinking in one operation with power.
  • Made from hardened high-speed steel vs carbon steel for longer life.
Check Stock

NEIKO 10169A Step Drill Bit Set and Automatic Center Punch | 5 Piece, 41 SAE Sizes Total, 1/8” – 1-3/8” | Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits

  • HSS COBALT STEP BIT: Classic stepdrill bit constructed of high-speed steel with titanium coating for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • SPRING LOADED CENTER PUNCH: Our 5-inch automatic spring punch tool is a great tool for working with materials like wood, plastic, metal, and leather. Centering tool is spring loaded with an adjustable cap that accommodates any project..
  • INCLUDES: Four multipurpose dill bit in 1/4-inch shank and 3/8-inch shank with automotive center punch and a red blow mold carrying case for easy convince and storage..
  • MULTIPLE HOLE DRILL BIT: 4 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

INTOO Drill Bit Set 21 Piece 1/16'-1/2' Quick Change Impact Driver Bit Set

  • Specifications: 21pcs titanium drill bits set, include 1/16X2,5/64X2,3/32X2,7/64X2,1/8X2,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,5/16,3/8,1/2 with 1/4 hex shank.
  • Highlights: Special plug hex shank of quick change drill bit is an upgrade version, it shows excellent performace than normal pressed hex shank, avoid drills peeling from the hex shank, effectively keep hex shank locked with drill bits during impact drilling process..
  • Characteristics:135° split point not only promises cutting speed,but also prevents slipping when start drilling；Titanium coating increases the ware-resistance and durability, effect long life drilling. Non-disposable packing makes sure the drills well stored..
  • Quick change: 1/4 inch hex shank of hex bit set well fits all power tools,especially for locking into quick change chucks,suitable for makita drill and makita impact driver, dewalt drill bits set,milwaukee drill bit set,effects quick change more easily and securely..
  • Widely used: industry grade high speed steel drill bit sets with high hardness, can be widely used in Steel, Wood, Plastic, etc. Ideal for DIY, home and general building/engineering using.Ideal impact drill bit set and drill bits for metal..
Check Stock

NEIKO 10197A Step Drill Bit Set 5 Pc Step Bit for Metal 50 SAE Sizes Total 1/8” – 1-3/8” SAE Titanium High Speed Steel Unibit Stepper Cone Drill Bit Two Flute Step Down Bits Step Up Drill Bits

  • HSS STEP BIT: Classic step drill bit set constructed of high-speed steel for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • MULTIPLE HOLE DRILL BIT: This versatile unibit step drill bit cone bit can replace 50 individual drill bits for metal with just 5 pieces in one box. Drill a range of different sizes and holes with a single bit without needing to change between bits..
  • STEP DRILL BIT SET INCLUDES: Four multipurpose metal dill bit in 1/4-inch shank and 3/8-inch shank and a red blow mold carrying case for easy convenience and storage in your car, garage or shop..
  • 50 SIZES IN 1: 5 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 9 step bit (3/8” shank.
  • 1/4" to 3/4"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

Drill America 15/16\ Bridge/Construction Reamer with Magnetic Hex Shank and Black and Gold Finish, KFD Series

  • Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation. Black and gold Killer Force (KFD) hex shank bridge reamers are manufactured from premium grade high speed steel..
  • Point is tapered to permit entry into overlapping holes. Short length facilitates use in areas with limited access.
  • Heavy-duty hex shank has six flats and is designed for portable pneumatic tools. For additional safety magnet inside the shank of reamer to secure in socket.
Check Stock

Carbide Burr Set, Tinpec Double Cut Cutting Burrs with 1/8\ Shank & 1/4\ Head, Tungsten Steel Die Grinder Bits for Woodworking, Drilling, Metal Carving, Engraving & Polishing – 10PCS

  • ✔【DIE GRINDER Cutting Burrs】: Carbide burrs casted from Tungsten Steel with amazing HRA003e85. Cutting Burr Demensions: Length:45-50mm, Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
  • ✔【SHARP DOUBLE CUT】: With grooves evenly crossed, Tinpec double cut cutting burrs are 2x sharper and faster, perfect for all materials like wood, plastic, steel, stone, ceramic and aluminum..
  • ✔【1/8” Shank】: With widely adopted 1/8” shank, Tinpec carbide burrs are compatible with most handheld electric or air powered tools, also in machine tools. Fast and smooth centering with the three jaw chuck..
  • ✔【LONG SERVICE LIFE】: Thanks to our hardened Tungsten Steel and superb tech, Tinpec die grinder bits are 10x more lasting than high-speed steel and 200x than grinding wheel..
  • ✔【PROJECT HELPER】A clear storage case comes with the carbide burr set for easier storage and access. A smart choice for your DIY, engraving, polishing, woodworking and carving projects..
Check Stock

TINVHY C1 ER32 4In Long Straight Shank Collet Chuck Holder CNC Milling Tool Holder Alloy Steel Chuck Holder

  • 4Inch shank holding all ER32 collets (Clamping range up to 1In).
  • Milling lathe collet chuck holder, high grade DN65 carbon steel material, straight shank, clamping nut, toughened and precision ground.
  • Straight shank type extended handle, the handle body was longer. The surface is quite smooth which offers a comfortable feeling and nice appearance.
  • Widely used in boring, milling, drilling, tapping, grinding and other processing.
Check Stock

Accusize Industrial Tools 20 Pc Hss Tin Coated End Mill Set, 2 Flute and 4 Flute, Cutting Diameter from 3/16'' up to 3/4'', 1810-0100

  • high speed steel, Tin Coating. Straight Shank.
  • One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16''.
Check Stock

High-k Gate Dielectrics for CMOS Technology

  • Boots for hazardous materials handling. Exceeds CSA standards for Di-Electric footwear. Steel toe, steel shank and steel midsole for complete protection..
  • NFPA 1991, 2016 edition compliant ASTM F2413-18, CAN/CSA Z195-12.
  • Specially formulated PVC allow protects you from some of the worst chemicals around while exceeding CSA standards for Di-Electric footwear.
  • Steel toe, steel midsole and steel shank Ultra grip Sipe outsole provides superior, slip resistance and protection.
  • Certified by S. E. I. to meet the requirements of NFPA 1991 Standard on Vapor-protective ensembles for Hazardous materials emergencies, Flash Fire certified.
Check Stock

5 Pack Drill Wire Brush Set, WENORA Wire Cup Brush for Drill 1/4 Inch Hex Shank, 0.012 Inch Coarse Carbon Steel- 3 Inch Wire Brush Drill Attachments

  • 3 Inch Wire Cup Brush Drill 5 Pieces - Suitable for working underneath cars and on relatively flat areas..
  • 【Production process upgrade】The WENORA Drill Wire Brushes are made of curled, untempered 0.012" carbon steel, upgraded from 60A carbon steel to 72A carbon steel, and upgraded in number and thickness (1-1.5 times) they are securely fastened to a securely designed cup-shaped metal holder that will not lose or bend during intense use..
  • 【Stronger 1/4” Hex Shank】1/4" (6.35mm) hex shank has better stability and is stronger than the regular round shank (6mm) and will not come off as easily as the round shank. Wire brush drill set can withstand the high speed of the 4500RMP..
  • 【More Durable Wire Brush for Drill】The standard 1/4 hex shank is compatible with most drill tools on the market,including a regular power drill as well as a pneumatic air drill, etc.Long-term use of the cup brush will not be asymmetrical and distorted..
  • 【Wide Application】The WENORA drill wire brush set for removing rust, finishing weld seams, polishing wood, and other-duty surface trea....
Check Stock

Utoolmart Round Shank Twist Drill Bits 1.5mm High Speed Steel 4341 with 1.5mm Shank 10 Pcs

  • 【Size】- Cutting Edge Diameter : 1.5mm / 0.06 inch.
  • 【High Speed Steel Tool】- High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • 【Round Shank】- Round shanks allow use with a wide variety of toolholding systems.
  • 【Uncoated Tools】- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • 【Versatile Uses】- For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass and metal materials.
Check Stock