Reviews Steel Screw Bushings

MAUREY MFG. H x 17MM Split Taper Bushing, H Series, 17mm Bore

  • Bushings are split through the flange and taper to provide a true clamp on the shaft that is the equivalent of a shrink fit..
  • Has a set screw over the key to help maintain the bushings position on the shaft until the cap screws are securely tightened..
  • Carbon steel for strength and resistance to wear..
Check Stock

Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Bearing Removal Tool Set 16 Pieces

  • 16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
  • the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
  • for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check Stock

OTC 7068 Upper Control Arm Bushing Service Set

  • Now you can easily replace press-in type upper control arm bushings on most rear wheel drive Chrysler Ford and GM vehicles.
  • Set includes C-frame screw assembly and all adapters needed for quick removal or installation of bushings without removing or damaging the control arm.
  • Works on rear axles and various front axle applications on light-duty trucks.
Check Stock

Orion Motor Tech OMT Blind Hole Collet Bearing Race and Seal Puller Extractor Kit Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set 16PCS

  • 1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm).
  • 2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use.
  • the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble.
  • 3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts.
  • 4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing.
  • for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part.
  • 5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed.
Check Stock

ATP Bush Bearing and Seal Driver Set 52pc

  • Substantial:Suitable for mounting of bearings, bushings, sealing rings, and rubber (even for use with hydraulic presses).
  • Multile:8-65mm & 74mm Metric Discs, Shaft, Allen Key, Screw can remove or install bushings that are flush with the housing and allows you to build....
  • Contents: Package includes (48) discs from 18mm to 65 (1mm graduation) + (1) 74mm disc + (1) grip handle/shaft + (1) 3mm Allen key + (1) screw + (1)....
Check Stock

Musiclily Electric Guitar Bass Neck Joint Bushings and Bolts with Screws, Black (Pack of 4)

  • Recessed neck screw bushings,fits for Electric Guitar.Used for neck,fixed neck and body.
  • 14mm out diameter, 9.8mm up inner diameter, 5.3mm down inner diameter, 5.0mm thickness.
  • Use by four sets,come with mounting screws.
  • Package Includes: 4Pcs neck screw bushings.
Check Stock

Pulley Diam 120 Axle 19 mm.

  • Sheave measures 1-3⁄4" OD by 1⁄2" rim thickness by 3/8" center pin diameter.
Check Stock

Morris 22328 Snap Bushings, 1.50-Inch, Black, Pack of 10

  • Electrical Bushings Snap Bushings - Snap Bushings for Metal Panels keep wires safe..
  • Snap bushings Eliminate Sharp Edges and insulate your sharp-edged holes in metal panels.
  • Easily Locks into Hole firmly with fingertip pressure.
  • Snap Bushings Protect Electrical Cables, ropes, utility lines passing through metal chassis.
Check Stock

Uenede Gold Self Centering Dowel Jig Kit with Drilling Guide Bushings Set Adjustable Width for DIY Woodworking Straight Holes Joints Tools

  • 【Professional Size】Adjustable, it can be used on boards of different thicknesses from 11mm to 65mm. There are 4 drill guide holes on the top of the jig. 2 holes directly accept 7/16″ and 1/2″ drill, the other 2 holes accept replaceable steel threaded bushings (1/4″, 5/16″ and 3/8″ drill)..
  • 【High Quality Material】The two pressing blocks are made of aluminum alloy, surface is anodized for Gold color and does not easily leave scratches. The center iron is treated with alkaline oxidation, and the screws are chrome plated to prevent rusting. These processes make our products more stable and corrosion resistance..
  • 【Essential Tool】The pressing blocks and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. Turn the middle bolt, the jig on both sides will tighten at the same time, the board will be clamped evenly, so that the position to be perforated is in the exact center..
  • 【Accurate Positioning】Fixture bolts with very good threads, and provide bushings of different sizes, suitable for creating different wood pin joints, to realize simple and convenient precise drilling, so that the positioning is more accur....
Check Stock

Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins

  • QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
  • MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
  • SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
  • EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Check Stock

Campbell 3042K 6\ Double B and L Star Metal Steel Shell Block with K Screw Pin Anchor Shackle, 3300 lbs Load Capacity, 3/4\ Rope, 3-1/2\ Sheave

  • Sheave measures 3-1⁄2" OD by 1" rim thickness by 1/2" center pin diameter.
Check Stock

E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)

  • 【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
  • 【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
  • 【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
  • 【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
  • 【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
Check Stock

uxcell M15 0.035T Capacity Single Swivel Rope Pulley Roller Block 2 Pcs

  • Available with bronze self-lubricating bushings.
Check Stock