Reviews Steel Round Forgings- BestItemr.com

Lisle 41220 Thick Pickle Fork Set, 5pc.

The set includes five forks: 11/16", 15/16", 1-1/8", 1-7/16" and 1-5/8".
The forks are threaded to interchange with either the handle for hammering or the pneumatic driver (401 shank) and a 6-1/4" extension that works with either handle to provide extra reach.
The forks are heavy-duty forgings and the handles are heat-treated alloy steel The forks are heavy-duty forgings and the handles are heat-treated alloy steel.

...: This allows you to clamp the knife in various positions when drawing out the blade. Sturdy, durable, and versatile these tongs will handle a variety of stock sizes from 1/8'' to 3/8 '' thick and up to 1 3/4'' wide..
Flat Tongs: For 1/4 inches Flat Stock. It's superior to pliers or vise grips for holding hot metal (forgings) since Flat tongs have large flat smooth jaw surfaces that do not scratch the workpieces..
Wolf Jaw tongs: Designed for holding a variety of stock sizes including Flat, Square, and Round stock. Perfect for the needs in the shop, at home, or in the field and essential in many situations. One of the tongs commonly used by blacksmiths..
Heavy Type Steel Construction: Sturdy and durable steel craft, finished with non-slip wax to protect from rust and corrosion for long-lasting reliability. Round stock providing the user with a comfortable grip. All tongs measure approximately 15.16 to 16.26 inches making them easy to operate in addition to keeping your hands a safe distance from the forge when removing steel. Specially designed for blacksmiths..

...o box jaws, wolf jaws or v-bit tongs to accommodate various sizes of metal..
Material–Forged from high quality steel round stock, and finished with non-slip wax to protect from rust and corrosion. The size of all tongs is about 15 1/2 to 16 inches, making them easy to maneuver in addition to keeping your hands and forgings at a safe distance when removing steel..
Function–All tongs will provide you with excellent grip and deadlock the work piece so that you can accurately control over your work piece while delivering heavy hammer blows on the anvil..

Tools for separating ball joints, tie rods, pitman arms and other uses.
Kit consists of three forks and two handles, one for hammering, the other for use with an air hammer (. 401 inch shank).
All forks are threaded to interchange with either handle.
Forks are heavy-duty forgings, handles are heat-treated alloy steel.

Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.

Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.

Dedicated forgings are used for superior strength to weight ratio utilizing aerospace alloy with a dome designed for improved flame travel and....
Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require.
Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for....

Fits: All Harley-Davidson Shovelhead engines 1978-1984.
80 cubic inch (1340 cubic capacity) kit includes 7:1 compression ratio domed pistons, rings, circlips, chrome piston pins.
Each Wiseco piston is designed with the proper installed clearance to produce the most power, least wear, and best seal at running temperature, for each application.
Dedicated forgings are used for superior strength to weight ratio utilizing aerospace alloy with a dome designed for improved flame travel and detailed skirt shape and profiles for stability and smooth operation in the cylinder bore.
Compared to cast pistons, forgings are tougher and more durable, and will stand up to the abuse that high performance motorsport applications require.

Material: Cold-rolled steel forgings, not easy to deform and rust, with stainless steel screws, better bearing capacity..
Size: The exact outside dimensions are: 6.3''Lx4.8''Hx1.2''W, suitable for a variety of 6" width shelves..
Feature: Embedded screw holes are reserved on the bracket, after the installation is completed, the surface is flat without protrusions, which is more beautiful..
Load Bearing: The load-bearing capacity of the bracket is also different depending on the installation of the wall. On concrete or brick walls, the maximum load is 80LBS. On the wooden wall, the maximum load is 45LBS..
Design: Easy-to-install design using basic DIY tools Can place decorative items on the shelf to decorate your home.

M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..