Reviews Steel Punch And Die Sets

Greenlee 7304 Knockout Punch Driver Kit

  • Set contains 4 punch and die sets, and high impact plastic case.
  • Use with battery-powered, hydraulic, ratchet or manual drivers.
  • Properly assembled through pilot holes, they will make clean, fast and accurate holes.
Check Stock

1 Ton Aviation Power Punch Kit Sheet Metal Hole Punching 7 Sizes Die DIY Repair

  • Durable power punch tool for punching accurate round holes through all types of materials.
  • From thin brass metal to plastic sheet through 16 gauge mild steel..
  • Package comes with seven quick-change, durable heat treated punch-and-die sets..
  • Sizes from 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 9/32". Punch opens up to 1/4".
  • Set completes with a durable plastic storage case.
Check Stock

Hand Press Grommet Machine, Heavy Duty Industrial Grommet Eyelet Tool Kit Table Mount Rivet Press Hole Punch Tool with 3 Dies and 900 Grommets

  • This 3 die hand press grommet machine is an essential equipment for dress makers, arts & crafts, sign shops and manufacturers, ideal for craft and industrial use.
  • Made of cast iron, built to last. This manual eyelet punch grommet machine is smart which is very easy to operate because of the simple structure, also convenient for shipping.
  • Specially designed for banners, signs, awnings, posters, curtains, digital printing, scrapbooking, corsets, belts, bags, shoes, etc, widely used as punch machine, eyelet machine, snap fastener machine, rivet machine.
  • The rivet press hole punch tool machine can be mounted to a tabletop or stand alone, which can fit anywhere as you want, just install with the die in suitable size.
  • Package includes 1 x Grommet Machine, 3 sets x Dies, 3 bags x Grommets (Total 900 pcs). The eyelet punch tool can exchange different die sets and 3 different dies can meet most needs.
Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
  • This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..
Check Stock

Lord & Hodge 1073A-1 Grommet Kit

  • Number of Grommet Sets Per Kit: 24 Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die..
  • A handy, compact, economical kit complete with tools and 12 rustproof brass grommets for immediate replacements or repairs in canvas or plastic..
  • Easy to follow instructions #0, 1/4" inner diameter Manufacturer: Lord & Hodge..
  • Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die. No. 1073A 0: 1 4.
Check Stock

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

  • Dimple Die for 1-1/4” Actual Hole Size.
  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..
Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

  • PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
  • For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
  • Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
  • Not recommended for stainless steel such as silverware and utensils.
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
  • 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
  • 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
  • Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Check Stock

TEMCo Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO Tool Kit 5 Year Warranty

  • Powerful 9 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads..
  • 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2". All dies have laser engraved alignment marks for easy and precise positioning..
  • Punching Thickness Capacity: 1/8 inch (11 ga) Steel Punching Capacity, 1/16 inch Stainless Steel..
  • Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic.
  • 5 Year Warranty from a well-known American name. NON-GENERIC.
Check Stock

ABN Hole Transfer Punch Set for Steel, Wood, Etc – SAE Transfer Set – 28 Piece Transfer Punch Set 3/32 to 17/32in

  • ... 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”, 7/16”, 29/64”, 15/32”, 31/64”, 1/2”, 17/32”.
  • BUILT TO LAST: Constructed from heat-treated tempered steel with a black oxide finish for maximum strength and longevity that resists corrosion and prevents rounding, mushrooming, or chipping of the conically-shaped (cone) tips.
  • Flat ends are slightly chamfered at the edge.
  • We recommend using these pieces as transfer punches – not intended to take place of a center punch.
  • EASY TO USE: Select one of the punches, hold punch shaft with one hand while gently tapping a hammer (not included) on the flat top of the punch to make a mark on your selected material that is visible for your center punch, then use your existing center punch (not included) to make a dimple.
  • PACKAGE CONTENTS: Transfer punch sets package includes (28) transfer punches plus (3/32-inch to 1/2-inch diameters incremented by 1/64-inch, plus a 17/32-inch diameter punch) and (1) 5.25” x 2.5” x 1.6” inch (13.3cm x 6.4cm x 4.1cm) plastic index stand for easy storage (each slot is labeled with SAE sizes for quick identification).
Check Stock

Lichamp Manual Knockout Punch Kit, Heavy Duty Metal Sheet Knock Out Box Hole Cutter Conduit Punch Driver Die Set

  • Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall).
  • Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated high carbon steel construction..
  • Economic Knockout Punch Driver Set, complete conduit punch set include 4 dies, 4 hole punches, 2 bearing driving bolts.
Check Stock

AMZCNC Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 2 inch (8T(1/2"-2"))

  • Powerful 8 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads..
  • 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2".
  • Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel..
  • Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic.
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
Check Stock

Numeric Stamp Set - Number Stamp Set - 9pcs Stamps Numbers Set Punch Steel Metal Die Tool - 12.5mm Number Stamp Kit

  • Numeric Stamp Set - Number Stamp Set - Number Stamp Kit | Description : 9pcs Stamps Numbers Set Punch Steel Metal Die Tool.
  • You can using for metal marking needs, Jewelry and on leather work, wood material etc..
  • Number : Sets of 9 Arabic numerals stamps 0 to 9.("6" same with "9").
  • Package includes :  1 set of Arabic numerals stamps (Total 9 pieces one set, includeds numbers 0 to 9).
Check Stock

AMZCNC Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 4 inch (15T(1/2"-4"))

  • Powerful 15 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads..
  • 10 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2",2-1/2",3"3-1/2",4" ..
  • Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel..
  • Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic.
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
Check Stock