Reviews Steel Pipe Reducer

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

DERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 4 inch x 2 inch)

  • Bowl Reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless steel 304 for resistance to corrosion and high temperatures.
  • Tri Clamp Bowl Reducer Ferrule Size 119MM fits 4" tri clamp.
  • Tri Clamp Bowl Reducer Ferrule Size 64MM fits 2" tri clamp.
Check Stock

QMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover

  • End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
  • End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
  • Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
  • Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.
Check Stock

10 Inch to 9 Inch Single Wall HVAC Duct Reducer & Increaser - Galvanized Sheet Metal Ducting Connector for Airflow, Heating, Cooling, & Air Ventilation System Extra Strength and Fittings

  • D______ ______________ & __________________: Sheet metal HVAC Duct Reducer for flexible or metal HVAC Ducts and air vents. Used to connect two air ducts of different diameters to create a seamless ventilation. Sturdy steel ducting is perfect for DIY and Trade use. Our HVAC Duct Reducer & Increaser Galvanized Metal for Longer Lasting Quality. Galvanized pipe to be used for gas heating, ventilation and air conditioning only. Not to be used for solid fuel venting and Non-Crimped Ends..
  • ________-______________ __________ __________: Our sheet metal reducers and increasers are manufactured from the highest quality of galvanized steel. These reducers are made of galvanized sheet metal. Perfect for use with either flexible duct or rigid sheet metal duct. Never be restricted to your air conditioner's ducting requirements again. Single Wall Galvanized Metal reducer for Duct / pipe reducing. Great for professionals and Homeowners. Metal is easy to drill with Self Drilling Screws..
  • __________ ________________ ______ ________________: These galvanized duct reducers / Increaser can be used with fans, ducting, air-cooled hoods, and ventilation systems, that allowing you to lengthen and extend your ducting. They are the perfect sheet metal fitting for changing duct s....
Check Stock

2-Pack Besosay Brass Reducer Hex Bushing Threaded Pipe Fitting 1 Inch NPT Male x 3/4 Inch NPT Female Adapter

  • ✅ SPECIFICATION - Standard brass pipe fitting 1" NPT male to 3/4" NPT female reducer adapter. For connecting pipes with different ends size..
  • ✅ MATERIAL - This brass reducer bushing adapter is made of high quality brass for corrosion resistance, high temperature ductility and low magnetic....
  • ✅ EASY INSTALLATION - The deep threads design allows the fittings to be better engaged with the object to enhance fixation, and the smooth threads....
  • ✅ OPERATION PRESSURE & TEMPERATURE - Max. Pressure: 150 PSI ,Temperature range：-65 to 250 F..
  • ✅ PLEASE TAKE NOTICE - This pipe fitting can not be installed for potable water use. And, NPT thread size does not actual diameter, it is only....
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

DERNORD Sanitary Fitting Reducer Fitting SUS304 Tri Clamp Ferrule Style 2\ Tube OD to 1-1/2\ Tube OD

  • Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless steel 304 for resistance to corrosion and high temperatures.
  • Ferrule Size(51MM end):64mm ferrule fits 2" tri clamp.
  • Ferrule Size(38MM end):51mm ferrule fits 1.5" tri clamp.
Check Stock

KIMPEX Bolt-on Muffler

  • ...nction 】48mm motorcycle muffler DB killer makes the exhaust smoother and improve the power, this detachable DB killer can quell the noise from the motorcycle exhaust, At the same time, it can as an extra decoration of your motorcycle, it can also help your motorcycle get the maximum output, it can work as a spark reducer als detachable DB killer, to get rid of the annoying harsh sound..
  • 【High Quality】This motorcycle exhaust pipe muffler made of high grade stainless steel, excellent quality, corrosion resistance, professional modified exhaust system, high temperature resistance, long life，reduce overall weight for maximum output for maximum performance..
  • 【DB Killer Noise Eliminator】This is a universal removable motorcycle muffler silencer,which is a DB Killer perfect replacement,effectively reduce the DB sound level from the louder exhaust system..
Check Stock

GASHER 26PCS Brass Pipe Fitting Kit, Hex Bushing, Reducer Adapter, Hex Nipple, 90 Degree Barstock Street Elbow

  • 【DURABLE】Not a cast product, more robust and durable than castings. Max. pressure 150 PSI..
  • 【MATERIAL】 Durable solid brass construction is resistant to corrosion and long-lasting..
  • 【THREADS】 Male and Female National Pipe Taper (NPT) threads for connecting two pipes.
  • 【TEMPERATURE RANGE】 Operating temperature range of -65 to +250 degrees F..
  • 【INCLUDE】1 x 1/4 Tee Fitting, 4 x1/4 Elbow Fitting, 4 x 1/8 Elbow Fitting, 1 x1/4 Coupling, 1 x 3/8-1/4 Nipple & Reducer & Bushing, 1 x 1/4-1/8 Nipple & Reducer & Bushing.
Check Stock

DERNORD Sanitary Concentric Reducer Tri Clamp Clover Stainless Steel 304 Sanitary Fitting End Cap Reducer (Tri Clamp Size: 2 inch x 1.5 inch)

  • Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless steel 304 for resistance to corrosion and high temperatures.
Check Stock

QiiMii Sanitary Fitting Reducer Fitting SS304 Tri Clamp Ferrule Style 3\ Tube OD to 2\ Tube OD (3 INCH X 2 INCH )

  • Ferrule Size(76MM end):91mm ferrule fits 3" tri clamp.
  • Ferrule Size(51MM end):64mm ferrule fits 2" tri clamp.
  • Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Made of Stainless steel SS304,there for resistance to corrosion and high temperatures.
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

Beduan Reducer Tri Clamp Ferrule Stainless Steel 304 Sanitary Fitting 2\ Tube OD to 1-1/2\ Tube OD (Pack of 1)

  • Reducer sanitary fitting can be used to connect two pipes of different diameters that are along the same pipe axis..
  • High quality 304 stainless steel, having durable and long service life..
  • Tube OD: reducing 2" tube OD to 1.5" tube OD - (51mm to 38mm tube OD)..
  • Tri clamp size: reducing 2" Tri Clamp / Clover / Sanitary to 1.5" Tri Clamp / Clover / Sanitary - (64mm to 51mm Ferrule OD)..
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access..
Check Stock