Reviews Steel Milling Machine

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

1 Piece of 22mm R8 Shank Milling Cutter Shank, Horizontal Milling Cutter Arbor 22MM R8 Shank Milling Machine Spindle Suitable for Milling Machine Bridge Mouths Gear Milling Cutter Holder

  • Suitable for cutting machine/saw diameter: 22mm..
  • High hardness, determine the maximum use..
  • R8 shank short milling cutter holder, used for 22mm gear milling cutter/face milling cutter/longitudinal saw..
  • Features: Made of alloy spring steel and alloy forged steel, with long service life..
Check Stock

ACTOOLS Lathe Milling Vertical Slide & 50 mm Self Centering Vise Vice-Engineering Tools

  • Lathe Vertical Milling Slide T-Slotted Caste Iron Bed of 125 mm X 100 mm in milling slide.
  • Vertical milling slide movement is approx 80 mm. Has 3 T- Slots on Table 10 mm Wide at the top of the T is 15 mm wide at the bottom of the Tee allows milling on your lathe machine.
  • Hardened Jaws with Horizontal / vertical Vee.
  • Maximum Jaw Opening 55 mm, Jaw Depth 28 mm.
  • Supplied with a 50 mm Caste Iron Self Centering Vice.
Check Stock

JAINGU T Slot Milling Cutter 8 10 12 14 18 20mm HSS End Mill for Metal Milling Straight Shank CNC Router Bit12x2x8x65L

  • 1. ​Usually for milling T-slots in the tables and beds of machine tools and similar applications..
  • 2. dear buyer，Only one T Slot Milling Cutter is included with each option, please purchase according to your size needs..
  • 3. A rugged design with free cutting features ,with alternate side cutting teeth for maximum chip clearance..
  • 4. High speed steel material, provide rapid chip removal. Used for milling low-carbon steel, aluminum, copper, iron and non ferrous materials, works well on aluminum..
Check Stock

4" Cross Slide Drill Press Vise, Heavy Duty Cast Iron Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining.
  • 【Heavy Duty Construction】: Constructed of heavy duty cast iron, ensures high hardness and durability, hardened steel jaws on the cross slide milling vice holder add for extra durability and longevity.
  • 【Double Direction Design】: Features with double direction design, can move in horizontal and longitudinal for precise positioning, removable handle of the milling vice clamping machine for easy slide on and off.
  • 【Easy to Use】: There are several mounting holes on the bottom of drill press vice for convenient fastening firmly in position, provide great stability and easy to use.
  • 【Versatile Milling Vice Holder】: Hinged vise crank handles drops out of the way, designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc.
Check Stock

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

3 Axis DRO Digital Readout Magnetic Scale DRO Display Kit CNC Milling Lathe,DIY Travel Length

  • So you will have the follow product : A -----Aluminum profile 1pcs 1M and 2pcs 800mm , -Various assembly methods ,1 .you can cut it to 3pcs short scale 2. 1pcs long 1.8M and a short scale .That means the DIY kit can be widely for lathe machine .milling machine. B , 3pcs Magnetic Scale Sensor (reading head) 5um resolution , C. Magnetic Tape & Stainless Steel Strip -2.4M D,End cap - 3 Pair. E.All of accessory for mounting scale ( User Manual included ) . F Digital Readout 3 Axis DRO.
  • Why choose magnetic scale : Fully sealed redhead with perfect structure of the profile takes it match IP67 protection class ,life time is longer thna linear glass , baesd on we provide 5 years warranty.
  • High Performance- 3 Axis DRO Digital Readout can be widely used on the Milling Machine bridgeport milling machine,Lathe Machine /7inch LCD Screen DRO ,Easy for operation. Built-in User manual , freeing hands from paper manuals.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • 【High working efficiency】: This chucking machine reamer set has sharp cutting-edge, high efficiency cutting ability, high accuracy, so your work will become easier under the use of this tools set. Also, this set has a long-term using service life.
  • 【High quality materials】: This set of cutter milling reamer is made of high quality and high speed steel materials, so these reamer cutters have high hardness.
  • 【Specific and professional use】: This steel milling cutting tool set is designed for reaming to mold processing and handicraft processing.
  • 【Wide using range】: This whole chucking reamer set can be widely used for bore machining, installed in drilling machine, milling machine, etc.
  • 【Fine process】: This set of chucking reamer tools' surface has processed by iron, plastic, wood, copper, aluminum and other soft materials.
Check Stock

INTBUYING U3 R8 Universal Multi-functional Cutter Grinder Sharpener End Mill Drill Bit Lathe Tool 110V

  • 【Scope of Application】 The bench grinder is used for grindering. Suitable for different kind of cutters, such as drill bit, lathe bit,end mill by using different acceories.Suitable for cutting edge milling machine, cutting plotter, line cutting machine, computer engraving machine, marking machine, etc..
  • 【Good Performance】High grinding precision, flexible rotating parts, low vibration and low noise. The tool holder part is equipped with bearings and is wear-resistant..
  • 【Save Cost】The grinding indexing head can be operated in a variety of positions to facilitate grinding any angle and shape, realize the multi-purpose function of one machine, and save costs for companies with multiple tool repair needs..
  • 【Main Accessories】1. 5 types R8 Collects：0.15”=4mm, 0.2”=6mm, 0.3”=8mm, 0.4”=10mm, 0.5”=12mm；2.White steel grinding wheel: suitable for grinding high-speed steel tools.3.Alloy grinding wheel: suitable for grinding tungsten steel and carbide milling cutters..
  • 【Parameter】Grinding Dia.：ф0-100mm(0-3.94″)；Taper Angle:0°-180°；Relief Angle:0°-45°；Negative Angle:0°-26°；Grinding Spindle；5200r.p.m.；Cup grinding wheel:100x50x20mm(3.9*2.0*0.8″)..
Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

  • 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
  • For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
  • The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

D26 Milling Machine Ball Handle Three Ball Handles Three Ball Rocking Handle Three Pills Handle Ball Crank 16mm Inner Hole Diameter

  • The milling machine's three-ball crank is made of high-hardness material and is durable enough for most milling machines and work benches..
  • The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use..
  • The olive-shaped hand-held part of the three-ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load..
  • The inner diameter of the three-ball crank of the milling machine is about 16mm in diameter, which is closely connected with other parts of the milling machine and is easy to operate..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock