Reviews Steel Manifolds

Schneider Electric AG13B020 Tac Erie Spring Return Two-Position General Close-Off Actuator Without End Switch, Normally Closed

  • Designed for use with Uponor TruFLOW manifolds, stainless-steel manifolds, or engineered polymer (EP) manifolds.
  • Accurately controls the flow of fluid through individual radiant loops.
  • Features an end switch for activation of a relay pump, heat plant, or other auxiliary devices.
Check Stock

4-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

The Weekend Brewer 8-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

The Weekend Brewer 2-way 5/16" Barb CO2 Splitter Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock

PEX Manifold Radiant Floor Heating Set 3 Loop System Stainless Steel Heated Hydronic Heating For 1/2" Oxygen Barrier Tubing

  • ★HIGH QUALITY CONSTRUCTION: Made of Stainless Steel and Chrome plated our Radiant PEX manifolds are sturdy and very durable. It easily resists corrosion and provides durability.
  • ★ALL-IN- ONE: Each manifold comes with Flow Meters, Shut-Off Ball Valves, Drain/ Fill Valves, and compression connectors.
  • ★EASY INSTALLATION: Our manifolds comes with their own heavy duty mounting brackets making them easily attachable to any wall. They come pressure tested and pre-assembled.
  • ★COMPATIBILITY: Our manifolds are perfect for Size 1/2 Inch Radiant Heat PEX tubing. (Not recommended for potable water).
  • ★30-DAY MONEY BACK GUARANTEE: Your satisfaction is always our priority. For whatever reason you are unhappy with the product you can simply return the item. No questions asked.
Check Stock

PEX Manifold Radiant Floor Heating Set 6 Loop System Stainless Steel Heated Hydronic Heating For 1/2" Oxygen Barrier Tubing

  • ★HIGH QUALITY CONSTRUCTION: Made of Stainless Steel and Chrome plated our Radiant PEX manifolds are sturdy and very durable. It easily resists corrosion and provides durability.
  • ★ALL-IN- ONE: Each manifold comes with Flow Meters, Shut-Off Ball Valves, Drain/ Fill Valves, and compression connectors.
  • ★EASY INSTALLATION: Our manifolds comes with their own heavy duty mounting brackets making them easily attachable to any wall. They come pressure tested and pre-assembled.
  • ★COMPATIBILITY: Our manifolds are perfect for Size 1/2 Inch Radiant Heat PEX tubing. (Not recommended for potable water).
  • ★30-DAY MONEY BACK GUARANTEE: Your satisfaction is always our priority. For whatever reason you are unhappy with the product you can simply return the item. No questions asked.
Check Stock

BATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400

  • 100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
  • COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
  • ADVANTAGE - Basic Operating RPM Range: Idle-5500.
  • FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
  • DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..
Check Stock

Z Whip SBC Stainless-Steel Exhaust Header Bolt Kit 1” 3/8-16 Bolts Compatible with Chevrolet V8 Small Blocks 265 283 305 327 350 383 400 Gen I & II 92-97 LT1 LT4 TPI TBI 96-98 Vortec 5.0L 5.7L BOP

  • Compatible with all 1955-1998/99 Chevy Small Block Exhaust Headers with up to ½” Thick Flanges 265 283 305 307 327 350 383 400 (These do not fit oem manifolds).
  • Also Compatible with Pontiac Buick Oldsmobile 326 350 389 400 421 455 V8 Engines Using Exhaust Headers with up to ½” Thick Flanges (These do not fit oem manifolds).
  • These are High Grade 18-8 Stainless-Steel Steel 3/8-16×1” Bolts and Washers That will NOT rust or Corrode like the chrome or steel ones sold. These Use a 5/16” Allen Wrench/Socket.
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.
Check Stock

GM Parts 12345982 Supercharger Gear Oil

  • Fantastic design places turbo on the passenger side, very strong manifolds.
  • Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check Stock

Eastwood High Temperature Resistant Satin Black Coating Aerosol 11.75 oz

  • Produces A Custom Look For Manifolds, Headers.
  • Temperature Resistant Up To 1400 Degrees.
  • Each Can Is Sufficient To Coat 2 Standard Cast Iron Manifolds Or About 6 Sq Ft.
Check Stock

BBC Holeshot Dual Plane Intake Manifold Oval Port, Plain

  • This Holeshot Manifold by Speedway Motors is the lowest profile intake design.
  • It is the perfect improvement over stock intake manifolds without worrying about hood clearance.
  • Manifolds are a dual-plane intake runner design and machined to accept spread port carburetors.
  • Has a idle-5500 rpm range and an oval port.
  • Features an aluminum construction with a natural finish.
Check Stock

Replacement for Professional 213-4514 Engine Coolant Temperature Sensor 12-Month Warranty

  • Compatible with all GM LS series engines.
  • Includes: 2 orings, 2 bolts, 2 coolant ports, 1 PTFE TAPE，and 1 steel braided hose ..
  • Can be installed on the front or rear of the cylinder heads.
  • not compatible with FAST 102 intake manifolds.
Check Stock

TITAN 757 PERFORMANCE Mercruiser Water Shutter Flappers Replaces 807166A2 V6 4.3L

  • New Mercruiser Water Shutter Kit for 4.3L V6.
  • This will only fit in y-pipe that was on the V-6 engines originally equipped with the one-piece exhaust manifolds. Will not fit later model y-pipes....
Check Stock