Reviews Steel Form For Concrete

Meoded Paint & Plaster Golmex Concrete Look Plaster, Lime/Cement Based Plaster for Interior and Exterior Walls, Concrete Finish

  • apply two layers using a stainless-steel trowel or a spatula to form a durable, decorative finish.
  • suitable for both interior and exterior surfaces, residential and commercial.
  • can be used to provide a smooth and durable surface on concrete walls or other concrete surfaces.
  • Popular and effective for finishing concrete surfaces.
  • to hide imperfections or defects and to enhance the appearance and durability of concrete surfaces.
  • use the correct tools and techniques to apply the plaster evenly, properly mix the plaster, ensure that the surface is clean and dry, and allow sufficient time for the plaster to dry and set.
  • Functional advantages: improve the fire resistance of concrete surfaces, protect the underlying concrete from moisture damage, and enhance the insulation properties of the wall or surface.
Check Stock

TOMAHAWK Power Screed Concrete Finishing Vibra Tool with 14 ft & 8 ft Boards Bull Float Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes 14’ and 8’ hardened aluminum boards for float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

TOMAHAWK Power Screed Concrete Finishing Vibra Tool with 12 ft & 10 ft Boards Bull Float Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes 12’ and 10’ hardened aluminum boards for float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

Conquest 3/4 x 7 Type 304 Stainless Steel Wedge Anchors Box of 10 Heavy Duty Fastener for Concrete

  • [DIMENSIONS] Diameter: 3/4" | Length: 7" | Thread Type: Coarse (standard) | Thread Length: 4" | Quantity: 10 Pieces | Material: 18-8 (Type 304) Stainless Steel.
  • [CORROSION RESISTANT] 100% 18-8 (Type 304) Stainless Steel provides the highest form of corrosion resistance. Ideal for outdoor or non-chloride environments.
  • [APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures.
  • [DESIGN] Chamfered top designed to prevent mushrooming during installation.
  • [INSTALLATION] Hole size is nominal diameter of anchor size.
Check Stock

Conquest 5/8 x 6 Type 304 Stainless Steel Wedge Anchors Box of 25 Heavy Duty Fastener for Concrete

  • [DIMENSIONS] Diameter: 5/8" | Length: 6" | Thread Type: Coarse (standard) | Thread Length: 4" | Quantity: 25 Pieces | Material: 18-8 (Type 304) Stainless Steel.
  • [CORROSION RESISTANT] 100% 18-8 (Type 304) Stainless Steel provides the highest form of corrosion resistance. Ideal for outdoor or non-chloride environments.
  • [APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures.
  • [DESIGN] Chamfered top designed to prevent mushrooming during installation.
  • [INSTALLATION] Hole size is nominal diameter of anchor size.
Check Stock

Conquest 3/8 x 3-3/4 Type 316 Stainless Steel Wedge Anchors Box of 50 Heavy Duty Fastener for Concrete

  • [DIMENSIONS] Diameter: 3/8" | Length: 3-3/4" | Thread Type: Coarse (standard) | Thread Length: 2-7/16" | Quantity: 50 Pieces | Material: Type 316 Stainless Steel.
  • [CORROSION RESISTANT] Highest grade 100% 316 Stainless Steel provides highest form of corrosion resistance. Ideal for any environment (including marine and saltwater applications).
  • [APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures.
  • [DESIGN] Chamfered top designed to prevent mushrooming during installation.
  • [INSTALLATION] Hole size is nominal diameter of anchor size.
Check Stock

GlobMarble Concrete Countertop Mold Edge Form CEF 7010. Liners Edge Profile. 2\ Width

  • CONCRETE COUNTERTOP EDGE FORM CEF 7010 RUBBER MOLD FORM LINERS EDGE PROFILE 8 FT..
  • GlobMarble molds are designed to produce many parts and will last you many years by using a little common sense and incorporating a maintenance plan. The concrete countertop mold edge forms are extremely flexible and easily wrap around corners without mitering and can also be used on plywood or melamine to free form any shape of table or countertop. Trim to length with a standard razor knife..
  • Concrete countertop mold edges come in a variety of shapes and sizes. Because concrete will take the shape of virtually any form or mold it is cast into it's possible to produce the look of stone, rope edges, vines, and more.The concrete countertop mold edge forms are made of high strength, 40 Durometer urethane rubber that with proper care will offer a lifetime of use..
  • ALL TAXES, DUTIES AND LOCAL FEES AT THE DESTINATION COUNTRY WILL BE PAID BY BUYER. OUR SHIPPING COST INCLUDES DELIVERY TO A DESTINATION ADDRESS ONLY. ALL GLOBMARBLE PRODUCTS ARE SHIPPED FROM THE UNITED STATES.
Check Stock

TOMAHAWK 37.7cc Gas Concrete Power Screed Cement Finishing Vibrating Motor with 10ft Aluminum Board Straight Edge Bar Vibra Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes hardened aluminum 10’ board float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

Concrete COUNTERTOP Edge Form Liners - Chiseled Edge Deluxe, 2\ Wide x Approximately 7', 9.5\ Length

  • CHISELED EDGE CONCRETE COUNTERTOP EDGE FORM, SBC'S #1 PURCHASED FORM DESIGN! APPROX. DIMENSIONS: 2" x 7' 11" - Experience Needed In Working With Concrete - Training Assistance Available If Needed.
  • Definitely SBC's Most Popular Countertop Edge Design! Creates a very clean natural stone edge, very classy look, you will be happy with the results from this form!.
  • BEAUTIFUL COUNTERTOP EDGE STONE DESIGN! DEFINITELY PERFECT FOR ANY INDOOR OR OUTDOOR KITCHEN AND BATH COUNTERTOP EDGES..
  • Best Chiseled Edge Countertop Edge Form On The Market! Our 2" Wide x 7', 11" Long, is used to create beautiful natural stone edge on countertops for indoor kitchens, outdoor kitchens, even bathroom countertops, bar tops, coffee tables, block wall capstone edges, baseboards, door trim, water feature spillway edge, etc...... This Chiseled Edge Deluxe Concrete Countertop has deeper, intricate, more desired textures for your high-end clients than any other forms in the market!.
  • ALL OF SBC PRODUCTS (MOLDS, FORMS, TEXTURE ROLLERS, TEXTURE STAMPS, ETC.) Are Uniquely Created & Designed by the Founder of SBC “Bryan Gauthier, NONE of SBC Products are copies of any other designs you see on the market! SBC Concrete Countertop Forms, Stamps, Rollers, Sink Molds, Offer THE MOST "Pristine" Tex....
Check Stock

Drive Pins Zinc Alloy - 1/4 X 1-1/2 - Qty 1000

  • Hammer Drive Pins (or just drive pins) attach fixtures to solid concrete or certain types of concrete blocks..
  • Using a predrilled hole, they are installed with hand tools, typically with a hammer strike, to drive the pin into the anchor body expanding the anchor to form a tight fit..
  • The washer on the anchor retains the pin and guides it during the driving installation..
  • Anchor Diameter Equals Hole Diameter-Makes it easy to determine hole size.
  • 304 Stainless steel is durable and rust resistant.
Check Stock

YQSDG 1Pairs Front Rear Moulds Balustrades Mold for Concrete Plaster Cement PVC Plastic Casting Garden Pool Park Railing Balustrade Fence Decoration Construction

  • 【Tools for Craft Lovers】 It is designed for garden lovers who want to create their own beautiful gardens and patios, make their gardens or parks more beautiful.also suit for walkways,garden, park, pavement, and other outdoor places.
  • 【Easy to use】Built-in snaps, easy to use, no special skills required, even inexperienced and no additional equipment needed to create a beautiful balcony when filling out the form..
  • 【Purpose】Intended for the manufacture of heavy-duty colored concrete by vibratory casting method. It can be used for casting concrete and plaster..
  • 【Specifications】Material: PVC Color: White Dimension: 60x11X11CM/23.62"X4.33"X4.33".
  • 【Notice】We advise using high quality cement. It is recommended periodic cleaning of the form from the concrete. Not recommended for transportation of filled moulds in the process of hardening of concrete..
Check Stock

BEST CONCRETE AND MASONRY FORM STAMP KIT - BEST USE FOR COUNTERTOP EDGES, INCLUDES 10 SMALL HAND STAMPS 7\

  • Best Concrete and Masonry Form Stamps - 10 Small Concrete and Masonry Form Stamps included in this set, Sizes approximately 6.
Check Stock

Concrete Countertop Mold, Countertop Edge Form Bullnose CEF 7012

  • Concrete Countertop Mold Edge Form CEF 7012. 2" high x 96" length (5cm x 183 cm) approximately.
  • GlobMarble Concrete Countertop Edge Forms are made from industrial grade manufactured in USA urethane rubber that with proper care will offer a lifetime of use. Edge Forms should be stored flat in cool dry areas out of direct sunlight..
  • GlobMarble Concrete Countertop Edge Forms are used to change the shape of a concrete element edges such as concrete countertops, stairs, vanities and table tops, great for pool coping, and step liners..
  • Made in U.S.A. To protect and prolong the mold's life we recommend use these releases: GLOBMARBLE CONCENTRATED CONCRETE RELEASE - G-1.
  • ALL TAXES, DUTIES AND LOCAL FEES AT THE DESTINATION COUNTRY WILL BE PAID BY BUYER. OUR SHIPPING COST INCLUDES DELIVERY TO A DESTINATION ADDRESS ONLY. ALL GLOBMARBLE PRODUCTS ARE SHIPPED FROM THE UNITED STATES.
Check Stock