Reviews Steel Cylinder Stand

New 60 cu ft Steel Oxygen Cylinder with CGA540 Valve

  • New, high-quality 60 cu ft steel oxygen cylinder with CGA540 valve.
  • Thick walled steel tank, with the durability to stand up to any work site.
  • 7″ diameter x 22.5″ in height with valve - approximately.
  • All cylinder ship empty. Please consult your local compressed gas supplier for filling needs..
Check Stock

The Orion Cooker Convection BBQ Smoker

  • Cooks with smoke, steam, and convection heat for fast cooking times..
  • Cook Times: Whole Turkey (12lbs) 1 hr. 24 min, Baby Back Ribs (6 racks) 1 hour 15 minutes, Brisket (9lbs) 4.5 hrs..
  • 100 percent stainless steel construction..
  • Cooks in half the time compared to traditional smokers with the same great taste..
  • Comes with poultry stand, lifting handle, 3 rib hangers and three cooking grates..
  • Uses indirect heat to produce convection current within the cooking cylinder.
  • Moist tender meat and worry free cooking.
  • Includes the following accessories: poultry stand with lifting handle, 3 cooking grates, 3 rib hangers and the orion cook book.
Check Stock

New 20 cu ft Steel Oxygen Cylinder with CGA540 Valve

  • New, high-quality 20 cu ft steel oxygen cylinder with CGA540 valve.
  • Thick walled steel tank, with the durability to stand up to any work site.
Check Stock

New 40 cu ft Steel Oxygen Cylinder with CGA540 Valve

  • New, high-quality 40 cu ft steel oxygen cylinder with CGA540 valve.
  • Thick walled steel tank, with the durability to stand up to any work site.
Check Stock

Sunnytech Mini Hot Air Stirling Engine Motor Model Educational Toy Kits Electricity HA001

  • FANTASTIC SMART LITTLE THING WITH EXTREMELY WELL MADE WHICH RUNS LIKE A DREAM----the stirling engine is produced with high quality material and elegant workcraft. this stirling engine adopts mirror surface stainless steel for the base, brass cylinder, premium spring, HRC55 nickel plating stand and accessories, aluminium alloy dis-placer piston, glass cylinder liner, precision bearing, bearing steel shafts, zinc alloy flywheel. All the parts have done surface treatment to avoid rusting..
  • LONG LASTING----It can run for 8+ hours continuous without any broken while using 95% alcohol which test by one customer. Worry about the cylinder glass broken during shipment or usage? It did come with two spare hot cylinder glass tubes and two O-rings inside the package. You can replace it fast and easily. Replacement video instruction included on the manual. We also can make offer for your future parts requirement..
  • SMART SIZE WITH TONS OF MECHANICAL KNOWLEDGE----This stirling engine designed reasonable and compact. it adopts Lever mechanism and Crank-rocker Mechanism, it looks more Mechanical and cool. This machine contains pattern of connecting rod piston, crankshaft, lever, bel....
Check Stock

On-Stage Cabasa (HPCS3500)

  • The Standard Cabasa is comprised of a textured steel cylinder wrapped with steel-bead loops to create a variety of percussive sounds.
  • This Cabasa by On-Stage features a sizzling musical tone that fits with a wide variety of musical styles and genres.
  • Creating loud and full sound that will stand out in a mix of instruments during a performance.
  • Enjoy a comfortable play with this contoured wood handle that reduces hand fatigue for long-lasting playing comfort.
Check Stock

Stainless Steel Mechanical Mechanical Lock Cylinder Door Anti‑Drill Anti‑Prying C‑Level Lock Bolts Replacement Cylinder

  • Lock Cylinder Door The Lock Cylinder Is Made Of High-Quality Stainless Steel, Durable, Anti‑Corrosion, Resistant To Perforation And Compression..
  • Lock Cylinder Lock - C‑Level Lock Cylinder, High‑Precision Blade Structure, Prevent Drilling And Prying, High Reliability, Which Is Dependbale To Use..
  • Cylinder Replacement Anti‑Theft - Each Lock Cylinder Is Equipped With 5 Keys, It’S More Convenient To Use, Don’T Worry About Not Having Enough Keys..
  • Lock Cylinder Stainless - Practical Lock Cylinder Accessories, Suitable For Families, Apartments, Hotels And Other Places. Suitable For General Iron Doors, Wooden Doors And Security Doors..
  • Steel Lock Cylinder - Equipped With Installation Accessories Such As Screws, Easy And Convenient Installation, No Professional Installation..
Check Stock

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

  • DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
  • REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
  • NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
  • 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
  • 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
  • UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
  • FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check Stock

LEM Products 1606 5-Pound Stainless Steel Vertical Sausage Stuffer

  • Cylinder removes easily to fill and clean.
  • Hardened steel gears with a protective gear box.
  • Includes (Two) clamps to secure unit to counter top.
  • Approximate Dimensions: 15" (H) x 9 1/4" (W) x 6" (Deep).
  • Cylinder Dimensions: 8 1/4" (H) x 5 1/2" (Diameter).
Check Stock

Super Leader Pneumatic Cylinder Aluminum Can Crusher, Heavy Duty Pneumatic Cylinder Soda Beer Can Crusher, Eco-Friendly Recycling Tool(Complimentary windpipe)

  • ❤Heavy duty air cylinder to smash all kinds of aluminum cans easily. Just press the button of the valve to smash almost all kinds of aluminum cans..
  • Cylinder Stroke: 7.9 Inch(200mm). Provide sufficient force to crush the cans,Working Pressure: 100 psi.
  • Air compressor is needed to drive the Can crusher.Maximum Can to be crushed: OD 2.8 inch, Height 7 inch..
  • ❤Sturdy and Durable: all steel material for the frame and piston, easy to crush any aluminum cans. It will stand up to any aluminum can and continue working and working into the future!.
  • ❤Works for both 12 oz. and 16 oz. cans. After receiving the goods can be used directly, without assembly.Makes the recycling process more efficient. Save space in your recycling area by crushing your cans easily and quickly..
  • ❤Safety mechanical valve used to prevent damage to kids avoid misoperation.CAUTION: PLEASE DON'T PUT YOUR HAND INTO THE FRAME WHEN YOU PUSH THE BUTTON OF THE VALVE AND THIS PRODUCT IS PROHIBIT TO USE BY KIDS..
Check Stock

Functional Squall Gunblade Revolver Replica Sword Handmade

  • Quick Overview Overall Length: 38" Blade Length: 28.5" Handle Length: 9.5" Free Display Stand Free Leather Sheath High Quality Stainless Steel Construction.
  • You can pull the trigger and cylinder revolves and the hammer fires! (Nothing can actually be shot from this sword but it is functional ).
  • Express shipping available upon request!.
Check Stock

INTBUYING 10T Hydraulic Cylinder Liner Puller Dry-Type Splitter 80-137mm with Box（Dry-Type）

  • 【Computer Desk】10T Hydraulic Cylinder Sleeve Liner Puller Dry-Type Splitter 80-137mm with Box ..
  • 【Parameter Details】Maximum pressure: 10T.
  • Max Axial maximum pull distance： 50mm.
  • 【Included】9X pull plate ,1x Lifting plate,1x cardan joint,1x Lifting cylinder,1x handle,2x cylinder sleeve connecting rod,2x cylinder sleeve stand,1x cylinder sleeve beam.
  • 【Description】80-137mm 10T hydraulic cylinder liner puller dry-type Splitter：80 85 88 93 100 102 105-106 125-126 137..
  • 【Guaranteed】If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee..
Check Stock

Eastar Cabasa Musical Instrument Percussion Instrument Hand Shaker with Stainless Steel Beads and Wooden Handle for Students Kids Classroom Band, Small Size

  • Beads And Stainless Steel Cylinder : Classic cabasa sounds come effortlessly from the 1.5mm ribbed stainless steel cylinder and 10 articles stainless steel beads. Loud and clean sound without overtones.
  • Beech Material: The main structure of Eastar Cabasa is beech. Beech is a wood suitable for percussion instruments. This makes this Cabasa to be more durable than similar products and has a better grip..
  • Extra Playing Skills: Eastar's small Cabasa has a 2.3inch (5.8cm) stainless steel cylinder and a 1.8inch (4.6cm) wide steel ball chain, which allows the player to have different effects by shaking the steel ball. The detachable body can increase or decrease the chain..
  • Included Content: Eastar Small Size Cabasa x 1,12-Month Product Service.
Check Stock