Reviews Steel Check Valves

DAN SPEED S316 Stainless Steel Vertical Check Valve,Spring Loaded In-line Low Cracking Pressure 2 inch

  • Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
  • Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
  • Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
  • Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
  • Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.
Check Stock

Evike All Purpose Silicone Lubricant Oil Spray for Airsoft Firearm - 50ml Small Hand Sized Can - 44040

  • Application: For General Airsoft Maintenance and lubrication for Gears, Seals, O-Rings, Plastic Parts, and more.
  • For ALL Airsoft guns and real-steel hand guns.
  • Prevent Jamming and reduce wear and tear and enables smooth operation.
  • Enhance your gun's performance, longevity, accuracy, and bb feeding.
  • Inflate air seal o-rings on valves with dried o-ring. Check for defective o-ring....
  • For AEG & GBB: Spray into magazine bb chamber periodically to prevent dust build-up == For Valves: Spray into gas-in and gas-out valves to check for....
Check Stock

Invincible Marine Fuel Line Connector, Mercury Female, 3-Piece, Multi, One Size (BR53210)

  • Made using the highest quality components.
  • The most trusted name in marine accessories and equipment.
  • This connector fits 5/16-inch or 3/8-inch fuel lines, includes spring loaded double check valves and has stainless steel hose clamps.
  • BR53210 Mercury Fitting 3-piece Female Tank Cast Aluminum, ¼-inch NPT.
  • This fuel connector has been tested in extreme climates and is alcohol resistant.
Check Stock

Victor 0382-0093 315FC 300 Series \VanGuard\ Heavy Duty Torch Handle, 9\ Length

  • Gas Service: Works with all fuel gases (pressure restrictions for different gases).
  • Built in flashback arrestors with no need for accessory flash arrestors.
  • Built in reverse flow check valves with no need for accessory check valves.
  • Features Victor traditional threaded assemblies for economical repair if service is necessary.
Check Stock

KUNTEC Victor Style Cutting Torch CA1350 & 100FC Acetylene Oxygen Welding Cutting Torch Set

  • 90 degree head For use with multiple gas types: Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
  • Brass coupling nut & double o-ring tapered seal gives quick gas-tight seal without a tightening wrench..
  • Connection: B fitting (9/16" - 18), 1pc 3#101 cutting nozzle,built in reverse flow check valves no need for accessory check valves.
  • Constructed with high strength alloy, heavy duty stainless steel and durable brass.
  • Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip.
Check Stock

8MILELAKE Cutting Torch Oxy/Acetylene Welding Kit, Medium Duty Oxygen/Acetylene Cutting, Victor Style CA1350 cutting attachment, 100FC torch handle

  • Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane.
  • Connection: B fitting (9/16" - 18), 1pc 3#101 cutting nozzle,built in reverse flow check valves no need for accessory check valves.
  • High quality medium duty three piece torch kit, CA1350 cutting attachment, 100FC torch handle..
  • Constructed with high strength alloy, heavy duty stainless steel and durable brass.
  • Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip..
Check Stock

uxcell Nickel-Plated Copper One Way Air Check Valve G 1/4 Female Threaded Full Port Check Valve 2Pcs

  • Function: the check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air.
  • Material and size: the one way check valves are made of PVDF, sturdy, wear-resistant and durable for long-term use.
  • Each check valve measures 6.3 mm/ 1/4 inches, the total length is 38 mm/ 1.50 inches.
  • Features: the pipe port of the check valve is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
  • Easy to install: the non-return check valve is easy to install, convenient for you to unscrew and replace.
  • Application: the non-return check valves are widely applied for automotive parts, machinery industry, household appliances, agriculture, etc..
Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock

ZENY NEW Portable Gas Welding Cutting Torch Kit w/Hose, Oxy Acetylene Brazing Professional Set with Case

  • Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1/2" with appropriate tips.Perfect for an Amateur Metalworker or a Seasoned Professional.
  • High-capacity Oxygen and Acetylene regulators, with a full 2 1/2" diam. for optimal performance..
  • Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
  • Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability.Precision torch handle with dual check valves, cutting attachment and cutting tip (size No. 0).
  • The whole Kit is constructed of stainless steel and brass for durability. Suitable For Home And Business Applications,Packed in ABS case, Lighter weight, easy to carry.
Check Stock

PumpSpy Threaded Quiet Sump Pump Check Valve with 100% Stainless Steel Clamps Included - Threads Directly into the Pump's 1-1/2" NPT Discharge to Connect it to a 1-1/2" Pipe - Model CV-150T

  • ...ipe and is engineered to allow for maximum flow from your sump pump. Works with any pump containing a 1-1/2" NPT discharge..
  • UNIQUE SPRING-LOADED FLAPPER: The unique spring-loaded flapper on our sump pump check valve eliminates the water hammer noise of standard check valves for silent operation. No more sudden noises that disrupt your lifestyle or sleep. With this check valve, water hammer noise will be a nuisance of the past!.
  • 100% STAINLESS STEEL HOSE CLAMPS: Our sump pump check valve threads directly into the pump's 1-1/2" NPT discharge to connect it to a 1-1/2" pipe and is engineered to allow for maximum flow from your sump pump. With durable ABS construction, you can have a system that'll last for a long time. The use of stainless steel hose clamps prevents rust and corrosion for a secure, leak-proof connection..
  • PRE-DRILLED WEEP HOLE: The pre-drilled weep hole of our pump sump check valve eliminates the air lock that may occur in bottom suction pumps. Our “full-flow” check valves prevent the water that remains in the sump discharge pipe from falling back into the sump pit. This avoids pum....
Check Stock

Ultimate Washer Replacement for General Pump Check Valves KIT001 Kit 1 New Valves + O-Rings

  • Replacement for General Pump Check Valves Kit - Kit 1, Valves and O-Rings (K01).
  • Complete Valve Kit Includes Six O-rings and Six Check Valves Complete.
  • High Quality Material for Best Performance.
Check Stock

AQUANEAT Aquarium Airline Tubing, Standard 3/16\ Tubing, Air Pump Accessories,with Air Stones, Air Pump Valves, Suction Cups and Connectors (Clear, 14Feet)

  • Package Includes：14feet clear tubing,2pcs 1" air stones,2pcs check valves,2pcs clear T connectors,6pcs clear suction cups.
  • Airline tubing: standard 3/16" diameter common to most airline accessories.
  • Air stones: durable and can produce fine bubbles continuously to diffuse oxygen efficiently in your fish tank.
  • Check valves: place these air pump check valves in your airline tubing between your air pump and aquarium water to prevent water returning down the air line.
  • Suction cups and T connectors: fit 3/16 inch ID standard airline tubing.
Check Stock

AQUANEAT Aquarium Check Valve One Way Non Return Valve for Aquarium Air Pump,10pcs Red

  • Specially designed non-return valves will protect your air pump by preventing aquarium water from back siphoning during a power outage.
  • They are made of plastic material for long time use.
  • Place these air pump check valves in your airline tubing between your air pump and aquarium water to prevent water returning down the air line.
  • Fits standard aquarium airline tubing with inner diameter about 4mm.
Check Stock