Reviews Steel Bushing Inserts

OTC (6913 Extension Housing Bushing Remover for Ford Ranger

  • Removes transmission extension housing bushing.
  • Inserts through the bushing and the drive screw and is tightened to draw the bushing out of the housing.
  • Applications apply to Ford Ranger transmissions.
Check Stock

Cardone Service Plus 22-207MB New Rack & Pinion Bushing Kit, 1 Pack

  • Urethane bushings and steel inserts enhance road feel and provides greater durability than typical rubber bushings.
  • 100% new bushing kit ensures long lasting performance.
  • All components included for complete repair and are application specific.
Check Stock

Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins

  • QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
  • MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
  • SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
  • EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Check Stock

Hex Bushing 1 Male x 1/2 Female Brass for Repair Threaded Pipe Fitting Pack of 1

  • ENHANCED QUALITY BRASS Makes Hex Bushing Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Hex Bushing have 1" Male....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our Hex Bushing can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices, Collectors, etc.
  • DURABLE –Our Hex Bushing don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings. N.
Check Stock

Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

TIME-SERT M8x1.25 Thread Repair kit P/n 1812

  • Time-Sert M8x1.25 thread repair kit P/n 1812.
  • Includes, Drill, conterbore, tap, install driver 5 inserts 11.7mm length.
  • The best thread repair on the market today!.
  • Solid bushing, self locking, positive placement repair.
Check Stock

Hornady Lock-N-Load AP Press Loader – Ammunition Reloading Press with Quick Change Lock-N-Load Bushing System, EZ-JECT System and Powder Measure – Enjoy Fast and Reliable Reloading – Item 095100

  • Lock-N-Load Auto Progressive Reloading Press – Reload up to 500 rounds per hour with this professional grade, auto indexing, 5 station progressive press that features the patented Lock-N-Load bushing system. This must-have Hornady reloading equipment is intuitive and well equipped for all your reloading needs.
  • Fast Reloading – Lock-N-Load technology allows you to stop loading, change dies and start loading another caliber in a matter of seconds thanks to the 5 station bushing system. Switch from 223 to 45 in less than 5 minutes.
  • Quick and Reliable Ammunition Press – The Lock-N-Load powder measure uses quick change metering inserts that allow you to switch from one powder to another with a push of a button. The EZ-JECT system ensures a reliable ejection of cartridges, every time without adjustments.
  • Smooth and Precise – With a single pull of the handle, you’ll feel the smooth responsiveness, the rugged construction, and most of all, the power on this single stage reloading press! And since the AP features automatic indexing, priming and ejection, every pull of the handle give you a precisely loaded round.
  • What's Included – Hornady AP Press Item 095100. Includes 5 Lock-N-Load Die Bushings, 1 large cartridge bin, primer pickup tubes, metering in....
Check Stock