Reviews Steel Braided Ptfe Hose

BVV 1/4\ 37 Degree Female JIC Stainless Steel Hose-24-inch

  • 1/437° Female JIC Stainless Steel Braided PTFE Hose These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications..
  • They provide a uniquely rugged, durable, and chemically resistant combination of Stainless Steel and PTFE by having an inner core of PTFE and protecting that with a braided stainless steel outer sleeve. These hoses have female JIC swivel on each end and they DO NOT require Teflon tape to create a seal | BVV 1/437 Degree Female JIC Stainless Steel Hose..
Check Stock

8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black

  • 8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black.
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances..
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
  • The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
  • PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant..
  • Package Includes: 1 x 8AN 20FT Nylon Braided Hose. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

  • 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
  • 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
  • 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
  • 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
  • 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
  • PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • ... PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 degree PTFE Fitting x 2, AN-6 180 degree PTFE Fitting x 2..
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

EVIL ENERGY 6AN 3/8 PTFE LS Swap EFI Fuel Line Fitting Kit E85 Nylon Braided Fuel Hose 25FT

  • PTFE nylon braided fuel line kit mostly used in EFI LS system and can be used as fuel injection hose, ls engine swap and EFI conversion fuel line,....
  • Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!(Includes: as shown in the picture.).
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. AN-6 nylon braided....
  • PTFE fuel hose can be compatible with all automotive fuels, lubricants, and coolant..
  • PTFE hose relatively hard, it can't be bend and folding in half. Professional installation is highly recommended..
Check Stock

EVIL ENERGY 6AN Swivel Hose End Fitting Straight for Braided CPE Fuel Hose Blue&Red 2PCS

  • Please attention that 6AN straight fitting only be worked with Braided CPE fuel line. It can not be installed on PTFE Hose..
  • Thread Size of 6AN hose fitting is 9/16-18UNF and the braided CPE fuel line which works with should be 3/8"..
  • Swivel design for easy assembly, the adjustable AN wrench is highly recommended..
  • Package Inclued: 2 pcs x 6AN straight swivel hose ends.
  • EVIL ENERGY Provide different kinds of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Arashi Clutch Cable for KAWASAKI NINJA ZX10R ZX-10R 2011-2017 Stainless Wire Line and Rubber Motorcycle Accessories Green 2012 2013 2014 2015 2016

  • -3 hydraulic clutch lines feature clear PVC coated, PTFE lined, premium stainless steel braided hose.
  • PVC hose coating is extruded to the stainless braiding, adding great looks and abrasion protection to expensive parts, while offering resistance to damaging UV rays.
  • PTFE liner is an inert material, which is compatible with all hydraulic and brake fluids.
  • has a heat range of 158 degree F to 500 degree F.
  • Stainless steel braid is superior in pressure rating, flame resistance and volumetric expansion to all other materials..
Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

  • 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
  • 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
  • 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
  • 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
  • SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

8AN 20Ft Universal Braided Oil Fuel Line Hose Stainless Steel Nylon CPE with 10PC Swivel Fitting Hose Ends Adapter Kit-Black

  • Application: Universal,Such as fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. (Not PTFE)).
  • Material:Based on premium stainless steel & Aluminum Alloy materials & Nylon, firmly, securely, light weight and portable.
  • Hose: Size(ID): AN 8, Length: 6m/20ft, Pressure Tolerance: 1500 PSI, Color: Black Hose End: Size(ID): AN 8, Color: Black.
  • Professional installation is highly recommended. Recommended to use Adjustable AN Wrench..
  • Package Includes: 1 x Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends.
Check Stock