Reviews Standard Thermocouple
Thermco ACC310DLSDIG Laboratory Long Stem Digital Thermometer, 12\ Stem Length, -50 to 300°C Range, +/-1.0°C Accuracy
- High Temperature K-type Thermocouple Thermometer Set with Stainless Steel Probe.
- K-type thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
- 5 ft (155 cm) long thermocouple cable with braided stainless steel cover, mini thermocouple plug made from chromel / alumel.
- Temperature measurement range: -328 to 932 °F (-200 to 500 °C), short term 1472 °F (800 °C).
- Grounded K-type Thermocouple junction for fast measurements, 1x 9V battery included.
Check StockBakers Pride M1296X 72 Long T46 Thermocouple
- K-type Thermocouple wire for making thermocouple or extension wire, up to 752 °F (400 °C).
- Chromel / Alumel type K thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
- The K-type wires are AWG 24 (0.51 mm) in diameter.
- ANSI color coded braided fiberglass insulation, red = -, yellow = +.
- 10 yard ( 30 ft ) roll, wire is flexible and easy to bend to shape.
Check StockAupoko Patio Heater Thermocouple, Outdoor Heater Replacement Parts M8 x 1 End Connection Nuts Thermocouple 410 mm Length M6 x 0.75 Head Thread with 6.3 MM/0.25'' Flat Terminal
- COMPATIBILITY: The thermocouple for gas patio heater is suitable for BBQ grill, fire pit, fireplace, heater hose connection..
- EASY INSTALLATION: You only need less than 5S to open valve..
- PREMIUM QUALITY: High standard solid copper and brass material, firm construction for durability and longevity..
- DIMENSION: Universal thermocouple with M6x0.75 thread on head, M8 x 1 end connection nuts thermocouple..
- WARRANTY: The patio heater thermocouple complies with 1- Year limited warranty, if there any question, please feel free to contact us..
Check StockPATIOSIR Patio Gas Heater Dump Switch, Outdoor Heater Replacement Parts Thermocoupler &Tilt Switch, Garden Heater Igniter Repair Parts
- ☆The head of thermocouple is fixed thread, need to be compared that it is suitable for your heater before purchasing the product..
- ☆Made of high-standard brass and red copper,and ABS materials, during operation, you need to hold the valve for 5-10 seconds and then thermocouple will start work..
- ☆Suitable for Propane gas heaters with Thermoelectric Safety, such as room gas heater, outdoor patio heater and other Thermoelectric gas products..
- ☆The thermocouple is easy to install. The probe is connected to the ignition device, the thermocouple is connected to the valve, and the other two ports are connected to the safety dumping switch, which does not require special tools and is prefect compatible for the original part..
- ☆The safety tipping switch will automatically stop the heater when the heater is tilted or dropped, which can prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure. Suitable for weak dump switches with gas R ≤ 10mΩ..
Check StockWater Heater Pilot Assembely Includes Pilot Thermocouple and Tubing LP Propane
- LP Propane GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE.
- STANDARD 24" LENGTH total. Tubing and thermocouple length 22 inches.
- FITS MANY WATER HEATERS ON THE MARKET BUT NOT ALL.
- WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT.
- Search for our 36" pilot if you need a longer one..
Check StockDANOPLUS High Accuracy Digital K-Type Thermocouple Thermometer (-50~1300°C) with Dual Channels 4 Probes (Wired & Stainless Steel) Handheld High Temperature Kelvin Scale Meter Tester
- Designed to work with 2 external K-Type thermocouples for high-temperature measurement ranging from -50 ~ 1300°C (-58 ~ 2372°F)..
- Comes with built-in microcontroller software & dual thermocouple input terminals that enable simultaneous measurement of two samples.
- Precision: Reading Accuracy (±0.1°C ±0.4) & fast response with K-Type Thermocouple Probes.
- Comes with a removable silicon rubber holster to protect your device from an accidental drop.
- Practical - any standard K-Type thermocouple connectors can be used to replaced the included thermocouples when it needed a replacement.
Check Stock2 Pcs Digital 2 Channels K Type Thermometer with 8 Thermocouples (Wire and Stainless Steel) -50~1300°c (-58~2372°f) Dual Measurement Meter Sensor Handheld HVAC Thermometer High Temperature Pyrometer
- High Accuracy: reading accuracy (±0.1°C ±0.4), fast response using K type thermocouple probe, this digital temperature gauge will bring you a lot of convenience.
- You will get 2 pcs of K type thermometers, 4 pcs of wire thermocouples and stainless steel thermocouples.
- Multiple Temperature Display: in addition to the max/ min/ average, data hold, and auto power off functions, this hand held temperature reader is specially designed with a "T1-T2" calculation function, making it easy for the user to find the difference between two samples.
- Portable and Practical: powered by battery, this thermometer with probe is portable and practical, operate it with 6 simple buttons with clear instructions, suitable for beginners and skilled users.
- Plus, the removable silicone rubber cover protects your device from accidental drops.
- It is factory calibrated and factory reset, and any standard K type thermocouple connector can be applied to replace the included thermocouple when needed.
- Wide Measurement Temperature Range: mainframe range of digital k type thermometer is about -50°C ~ 1300°C (-58°F ~ 2372°F).
Check StockCooper EconoTemp 32311-K EconoTemp Thermocouple Thermometer, Type K, -40 to 500 Degrees F Temperature Range, Multicolor
- Dual-range digital Type K thermocouple thermometer for use in monitoring temperatures of food products.
- Measures temperature from -40 to +500 degrees F (-40 to +260 degrees C), with an accuracy of + or - 2 degrees F (1 degree C) at ambient temperatures 68 to 86 degrees F (20 to 30 degrees C).
- Accepts standard Type K thermocouple probes (sold separately).
- Molded rubber casing provides impact and water resistance.
- CE mark indicates compliance with applicable EU directives, and NSF listing indicates compliance with applicable safety standards.
Check StockInstrukart Dry Block High Temperature Calibrator AI-DBC 650 for Calibration Labs Pharmaceutical divisions Thermal Plants divisions Along with Calibration Certificate
- Accuracy: ±0.6°C, Bath Stability: ±0.5°C.
- Measuring Functions: J Type Thermocouple, K Type Thermocouple, T Type Thermocouple, R Type Thermocouple, S Type Thermocouple, N Type Thermocouple, MA, MV, Volts, Ohms, RTD (Pt 100).
- Temperature Steps: 50°C, 150°C, 300°C, 450°C, 600°C.
- Switch Test: Continuity check with OPEN / CLOSE indication.
- Transmitter Supply: 24V DC ± 10% (Loop Powered).
- Power Supply: 230V AC ± 5% / 50Hz, 500 W for 350UTC.
- Supply Scope: Instrument, Power Cable, Carrying Case, Test Lead(2 & 3 Wire), Insertion Tube, Insertion Tool,Spare Fuses: 6A x 2nos User Manual, Calibration Certificate.
Check Stock3\ Outside Air Kit for Pellet Stoves with 3\ Air Intake Pipe Including Harman Stoves 3\ X 10'
- QuadraFire Thermocouple 800, 1000, 1100i, 1200, 1200i Pellet Stoves 812-0210.
- Top Quality Aftermarket Replacement Part.
- The Thermocouple is the device that monitors the fire after start-up. Once it reaches temp the thermocouple allows the stove to start feeding on it's own in normal operation mode. If your stove goes out after the initial start-up cycle, more than likely the thermocouple needs to be replaced..
- Designed Specifically for the above mentioned models.
Check StockMontague OVEN THERMOCOUPLE 48\ 1036-7
- K-type thermocouple connector with real chromel alumel contacts.
- Miniature or mini k-type connector dimensions.
- Works with all k-type thermocouple wires and extension wires.
- Set of 10 male mini thermocouple connector plugs.
- Compatible with thermocouple plugs from other manufacturers.
Check StockTemperature Sensor, PT100 Type Digital Temp Transducer Thermal Probe Sensor Waterproof with Cable for Arduino Raspberry Pi(50MM)
- ☀ 【Wide Temperature】 This temperature sensor is PT100 type stainless steel waterproof thermocouple, and it can withstand wide temperature range of -200 ~ 450 ℃..
- 【Characteristics】 It has the feature of high precision, high sensitivity, high temperature resistance, quick response, good shockproof effect..
- ☀ 【Parameters】 Lead length: 1.5m / 59.1in.
- Protecting tube diameter: standard 7 mm..
- ☀ 【Excellent Sealing】 The temperature sensor with great processing treatment, argon arc welding seal, excellent sealing effect..
- ☀ 【Durability】 The temperature thermocouple sensor probe adopted of high quality three-core high temperature shield wire, secure and durable..
Check StockTaylor Precision Products Thermometer 3Pc Set Includes 1 Super Fast Digital Thermometer and 2 Leave-in Oven-Safe Analog Meat Thermometers, Multicolor (5274076)
- KITCHEN ESSENTIALS: This set includes one Taylor Turbo Read Thermocouple Thermometer with folding probe, 1 large dial leave-in thermometer, and 1 standard dial leave-in thermometer..
- SUPER FAST: The digital thermometer in this set uses thermocouple technology for rapid temperature readings in 6 seconds. This highly accurate thermometer has a range of -40F to 572F..
- BLUE BACKLIT DISPLAY: Large 1” display is backlit for easy reading on the digital thermometer included in this set. HOLD function locks in the last temperature displayed on the screen after it is removed from the food..
- OVEN SAFE: These meat thermometers use a tempered glass lens and are safe to leave in an oven for monitoring during cooking. The large dial is perfect for poultry and roasts, while the standard dial is ideal for smaller items and cuts of meat..
- IMPORTANT: The thermometer will be hot after use. Use potholders or oven mitts when handling a hot thermometer.
Check Stock