Reviews Standard Cylinder Series

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • RACE READY PERFORMANCE: With the BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly with OKO 21mm Carburetor w/ Velocity Stack you’ll get the power and speed your build’s been looking for. A ported cylinder body with a high performance reed valve intake system, this race assembly was made for race engines in mind..
  • PORTED CYLINDER: Unlike other cylinders, the BBR Tuning Racing Series DIO Cylinder Body is ported to allow maximum fuel and air mixing within your motor. The exhaust port can fit nearly any performance muffler as well as any stock exhaust muffler you want to run, which the intake port is specifically designed to accept the reed valve assembly included with this kit.
  • BOOSTS POWER: With a 32mm opening, you’ll be able to fit hardcore racing carburetors like the BBR Tuning High Performance 2-Stroke OKO Style Carburetor without a single problem. With the right carburetor, this reed will deliver tons of fuel and air to your motor and give you higher speeds and even more torque..
  • COMPLETE KIT: The BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cyl....
Check Stock

AKRacing Gaming Chair Premium Series Gas Cylinder Replacement Option Kit (Chair Base + Leg Set)

  • AKRacing Gaming Chair Premium Series Gas Cylinder Replacement Option Kit.
  • You can change the height of the chair by purchasing it with a lifting gas cylinder (sold separately).
  • Set Contents: Cylinder fixing base, 5 feet base (silver).
Check Stock

Universal Cylinder Liner Puller Assembly - Heavy Duty Diesel Engine Cylinder Liner Puller Used for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” bore, Alternative to PT-6400-C M50010-B 3376015

  • 【Application】Compatible with Mack Cummins Volvo Detroit International and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16 Maxxforce DT, DT360, DTA360, DTA466, DT466, DT530 (PLN),DT466E, DT530E, DT570, HT570..
  • 【Direct Replacement】Our universal cylinder liner puller direct replacement for OEM #PT-6400-C, M50010-B and 3376015..
  • 【Function】This universal liner puller works on wet liners of from 3-7/8” to 6-1/4” bore, up to 15” deep, with a minimum wall thickness of .148. Used to safely & correctly remove the cylinder liners avoiding damage to the cylinder block..
  • 【Important】Threads must be lubricated with J23444-A or equivalent high pressure lubricant for heavy duty truck applications. (Package Includes 1 x Grease AND 1 x Cylinder Liner Puller Tools Kit PT-6400-C.).
  • 【Superior Material】Crafted from quality carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy and durable..
Check Stock

IAP Performance 043101355CK Complete Dual Port Cylinder Head with Sensor Hole for VW Beetle

  • 【Premium Material】Made from quality steel with black coating, corrosion and rust resistance, sturdy and durable..
  • 【Function】This tool is attached to the cylinder head, used to lift the cylinder head from the engine..
  • 【Application】Suitable for Detroit diesel 60 series engines..
  • 【Easy & Convenient to Use】Remove the cylinder head bolts and install the cylinder head lifter bracket (J–35641–A) using the bolt hole at the inboard center, then attach a suitable lifting hook to the eyelet in the lift bracket, and lifter the cylinder head off the engine..
  • 【100% Satisfaction Guarantee】Our focus on products and customer services is 2nd to none. If you're not 100% satisfied with this Cylinder Head Lift Bracket, simply return it for a full refund in 30 days..
Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

  • [INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
  • [Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
  • [Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
  • [Size Information] Outer Cylinder : 2 inches.
  • The height of fully expanded: 16.9 inches.
  • The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
  • [One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..
Check Stock

Gas Lift Hydraulic/Pneumatic Piston for Office Chair Gas Lift Cylinder Replacement Parts,Universal Size Fits Most Executive Chairs,Includes Removal Tool,Gloves,Gas Cylinder(Black)

  • 【HIGH QUALITY】Durable,and the best quality gas lift cylinder, withstand higher weight and pressure, high safety and explosion-proof. The gas lift cylinder has passed SGS official test and BIFMA certification, and is made of high-quality thickened outer steel to ensure compliance with quality standards..
  • 【WITH COMPLETE REMOVEL TOOLS】Package come with one gas lift cylinder, removal tools --2 shafts(28mm/1.1" dia.), 2 bolts, 1 L wrench and a pair of gloves. You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair..
  • 【UNIVERSAL SIZE THAT FITS MOST CHAIRS】This chair cylinder replacement will fit all office chair bases standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. It has a better load-bearing capacity. This office chair piston maximum weight it supports is 1000Lbs, which can support much heavier than ordinary gas cylinder for office chair..
  • 【SAVE MONEY】Spending 5 minutes will bring a new life to your old office chair. Fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a b....
Check Stock

SP Bel-Art Frigimat Junior Dry Ice Maker; U.S. Model (F38886-0000))

  • Lightweight body is never as cold as the dry ice, even when filled.
  • allows safe transport of the unit and contents when wearing appropriate gloves. Rugged nickel-plated "pigtail" connects it to the CO2 cylinder valve which is used to regulate gas flow.
  • Includes a 1.8m (6ft) nickel-plated copper connecting tube with standard CGA 320 thread coupling for easy attachment to a LCO2 cylinder.
  • Read through Instruction Manual (PDF) under Technical Specification before installation.
  • Attach to a liquid CO2 cylinder equipped with a dip tube to produce a ready-to-use 250 to 350 gram block of dry ice in only a few minutes.
  • each 50lb. cylinder makes from 10-16 blocks of dry ice.
Check Stock

Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size

  • STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
  • maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....
Check Stock

J-35597-A 5874 Cylinder Liner Installer Tool Fits for 60 Series Detroit Diesel Engines DD60 Tool Alternative

  • 【Great Compatibility】Perfectly fits for Detroit Diesel 60 Series engines. Alternative to OEM part number J-35597-A and 5874..
  • 【High Performance】 Specifically designed to easily and correctly install the cylinder liners without damage, saving your time and energy..
  • 【Easier Work】Simply attach the installer tool with three cylinder head bolts to after inserting the liner into the cylinder block. As the drive....
  • 【Superior Material】Made from quality & high strength carbon steel, prevent corrosion and rust, impact resistance, sturdy and durable. High....
  • 【100% Satisfaction Guarantee】If you're not satisfied with our 5874 Cylinder Liner Installer, simply return it for a full refund in 30 days. While....
Check Stock

HOSALI Office Chair Cylinder Replacement,Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston, Universal Size

  • UNIVERSAL SIZE THAT FITS MOST CHAIRS: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - ANTI-EXPLOSION CYLINDER: Our office chair piston passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail, they built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than other gas lift cylinder you ever use..
  • 5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches.
  • maximum length when fully extended: 16.7 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair smoot....
Check Stock

JSP Manufacturing UFP Plastic Outer Member Cap 2-1/2 inch Diameter 32547 fits A60 A70 A84 A75 (1)

  • Brand New UFP Plastic Outer Member Cap ~ 1 Pack.
  • Replaces UFP Part #: 32547 ~ Replacement black plastic outer member housing cap.
  • Covers the access hole to the actuators master cylinder reservoir plug ~ Twist-Lock design, locks into place with a simple clockwise turn.
  • Standard issue cap works with UFP Brake Actuators ~ Compatible with Trailer Buddy UFP Brake Actuators.
  • Fits: A-60, A-70, A-75, A-84 series UFP Brake Acuators ~ Made in USA!.
Check Stock

J-35791 Cylinder Liner Puller Remover Tool Sleeve Puller Removal Tool Fit For Non-EGR Detroit Diesel 50 & 60 Series Engines & Volvo D12 D13 D16 Engines Replace For J-35791 M30143

  • APPLICATION: The J-35791 cylinder liner puller remover tool is compatible with the Non-EGR Detroit Diesel 50 & 60 Series engines and Volvo D12 D13 D16 engines..
  • FUNCTION: The cylinder liner puller removal tool used to safely and quickly remove the cylinder liner and reduce the damage to the cylinder in the disassembly process. Save your time and your money..
  • REPLACE FOR : This tool replace for cylinder liner puller remover tool part # J-35791 M30143..
  • MATERIAL: The cylinder sleeve puller removal tool is made of steel, coated with silver finish, anti-rust and anti-corrosion, provide a long lifespan..
  • Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product..
Check Stock

McAvory Storefront Door Commercial Mortise Lock Cylinder & Thumbturn Adams Rite Style Cam in Aluminum 1 Set

  • 1" Mortise Cylinder Sets Fit Adams Rite, Kawneer, Vistawall, & Most other Storefront Door Locksets.
  • Each Set Includes 1 Keyed Lock Cylinder & 2 Keys, 1 Thumbturn , Cylinder collars.
  • Standard 1-inch Length , Standard 1-5/32" Diameter Commercial Door Lock Mortise Cylinders.
  • For use with commercial Store Front Deadbolt, Hook Lock, and Deadlatch in Glass Doors with narrow aluminum Frame.
Check Stock