Reviews Stainless Steel Wedge Bolt Anchor

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

  • Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
  • Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
  • The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
  • The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
  • The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock

2 Pcs 10mm Screw Pin Anchor Shackle 3/8 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 2 Pcs 3/8"(10mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 22mm, Working Load Limit: 2000lbs, Breaking Load: 8000lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

Antsky T316 Stainless Steel (Marine Grade) Wedge Anchor Bolt (3/8\×3-1/2\

  • 【Marine Grade】Antsky wedge anchor bolts are made from high quality 316 STAINLESS STEEL, it's rust resistance, can last long in wet and humid environments；.
  • 【Diameter】The OD of the anchor is 3/8'', the total length is 3-1/2" , the length of the threads on the anchor is 2"；.
  • 【Black Painting】Our anchor's surface is electric painted into black colour, which is special made for longer working life and stylish looking；.
  • 【Application】This anchor is designed to use in concrete、rocks etc. base material；.
  • 【Note】The anchor requires a pre-drilled hole in the base material, which must be same size as the OD of the anchor, we suggest to use a 3/8'' drill bit..
Check Stock

1 Pcs 12mm Screw Pin Anchor Shackle 1/2 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 1 Pcs 1/2"(12mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 1" (25mm), Working Load Limit: 1400kg / 3086lbs, Breaking Load: 5500kg / 12125lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

Horiznext 3/8 x 3 Wedge Anchor for Cement and Concrete only zinc-Plated Carbon Steel Screws and lag Bolts （ 30 pcs

  • ➤Made of carbon steel, heavy duty, durable..
  • ➤Great for use in CONCRETE only, and should never be used in block or brick base material.It's strong and great for both indoor and outdoor use. Whether you are attaching a boat lift to a seawall or securing a safe to concrete in your or fence, you can count on Bolt Dropper wedge anchors to hold tight..
Check Stock

NAXEN 26kN Bolt Hanger Stainless Steel Climbing Hanger Climbing Anchor for 10 mm / 3/8 Bolt Pack of 6

  • Durable Hanger. With stainless steel and vibrated polished, the climbing anchor features corrosion resistant..
  • Sturdy Anchor. The bolt hanger is rated at 26kN, which offers a safe connection point for you..
  • Rounded Edges Design. The clever design offers anti-wear effect when clip carabiner or other gear on the bolt..
  • Large Open. The wide connection hole design facilitates carabiner or any other gears clipping..
  • Available Bolt Diameter: 10 mm / 3/8 in..
Check Stock

#44 Blind Rivet Button Head 1/8 Diameter 3/16 - 1/4 Grip Range Plain Finish 304 18-8 Stainless Steel 100 pk

  • 【High Quality Stainless】Bolt Dropper Rivets are 100% 18-8 (304) Stainless Steel giving them one of the highest forms of corrosion resistance. This makes them the perfect choice for use in any environment (including marine/saltwater)..
  • 【Strong Holding, Top Quality】Thick shaft to ensure a secure hold and pop when tight. These rivets will anchor down and give you a long lasting connection that won’t corrode or pop out..
  • 【Great To Keep Around】Bolt Dropper rivets are great to have around for when you need them most! Use in any application, any condition and any environment! Bolt Dropper rivets are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and long lasting!.
  • 【Dimensions】Diameter: 1/8" | Grip Range: 3/16" x 1/4" | Quantity: 100 pcs | Material: 18-8 Stainless Steel Corrosion resistant commercial grade by Bolt Dropper.
  • 【LIFETIME GUARANTEE】Our products are 100% stainless steel. We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

Preamer 5-Pack Eyebolt Bolt Stainless Steel Wall Concrete Brick Anchor Expansion Bolts Ring Screw Eyes M6x70mm

  • High-quality Material: Our M6x70mm Expansion Bolt is made from high-quality 304 stainless steel, which is known for its excellent strength, durability, and resistance to rust and corrosion..
  • Superior Strength: This expansion bolt is capable of supporting up to 200 kg/441 lbs of weight, making it an ideal choice for anyone looking for a secure and reliable anchor point for their equipment..
  • Easy to Install: The expansion design of this bolt allows for easy installation and adjustment, making it a hassle-free solution for those who want to install it quickly.Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole..
  • Versatile Use: This expansion bolt is suitable for a wide range of applications, including sandbag, hammock, or swing set. Widely used in fence,burglarproof doors and window,canopy,air conditioning fixation,home decoration,engineering,etc.It can be used both indoors and outdoors, making it a great option for home or commercial use..
  • Long-lasting Performance: The M6x70mm Expansion Bolt is crafted from high-speed steel, which ensures long-lasting performance even under tough conditions. It is built to withstand the test of time, providing a secure and reliable anchor point for ....
Check Stock

Lee Women's Regular Fit Straight Leg Jean, Anchor, 14 Petite

  • Extremely rugged and corrosion resistant.
  • Bolt or weld to structure for fall arrest anchor point.
  • Compact 1/4" x 2" x 4-1/2" (6 x 51 x 114 mm) 304 stainless steel plate.
  • D-ring anchorage plate with zinc plated steel D-ring and 304 stainless steel plate.
Check Stock

uxcell 10Pcs 9mm-15mm Grip Range Toggle Hollow-Wall Anchor Screw Eye Assortment

  • Wedge anchor provides a secure hold in solid masonry and uncracked concrete.
  • Anchor consists of a 304 stainless steel body, washer, nut, and clip to provide more corrosion resistance than galvanized or zinc-plated steel anchors.
  • Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code.
  • Ultimate tensile strength is 2,000 lb. at 1-1/4" embedment depth in 4,000-psi concrete with a static load.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Yasorn 5-pack Stainless Steel External Hex Expansion Bolt M8x60mm

  • Material : High quality 304 stainless steel.
  • Sturdy and firm , resistant to rust and corrosion.
  • Concrete anchor and masonry anchor , easy to be mounted.
  • A installation manual has been uploaded below the "Technical Specification" , please read it..
Check Stock

Wolf Tooth Precision-Machined Seatpost Clamp

  • The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself..
  • The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force..
  • Lightweight 6061 T6 aluminum, M5 stainless steel bolt with integrated washer.
Check Stock