Reviews Stainless Steel Thread Insert

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

E-Z LOK Coil Threaded Insert For Metal 18-8 Stainless Steel Helical Wire Thread Insert 8-32 Internal Threads, 0.328\ Length, Pack Of 10

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 8-32 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, #6-40 Internal Threads, 0.138\ Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

E-Z LOK Coil Threaded Insert for Metal 18-8 Stainless Steel Helical Wire Thread Insert 1/2-13 Internal Threads, 0.750\ Length, Pack of 5

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 1/2-13 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, M8-1.25 Internal Threads, 8mm Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

1/4 -20 Nylon Insert Hex Lock Nuts Allen Hex Drive 304 Stainless Steel 18-8 Full Thread Coarse Thread UNC Pack of 25

  • Package: 25 PCS 1/4"-20 Nylon Insert Hex Stainless Locknuts.
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
Check Stock

#10-24 (50 PCS) Stainless Steel Hex Locknuts with White Nylon Insert, Stainless Steel 304 (18-8) Lock Nuts, Bright Finish, Full Thread, Hex Drive

  • Package: 50 PCS #10-24 Nylon Insert Hex Stainless Locknuts.
  • Overall Height: 0.157 inch to 0.187 inch.
  • Made of 304 stainless steel (no coating outside) 18-8 which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
Check Stock

Milliontronic Stainless Steel 304 Nylon Insert Locknut, Metric (M5 (100Pcs))

  • Material Grade: AISI 304 Stainless Steel (18-8).
Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (10 pcs)

  • The hand screw tap used to make new M6 threads or re-thread damaged and/or jammed threads..
  • Wire thread insert tool is a tool specially used when installing (or removing) wire thread inserts..
  • The set also includes 6pcs M6*1*1.5D and 6pcs M6*1*2D threaded insert screw made of 304 stainless steel for use..
  • They are widely widely used in the automobile industry,rail car industry,shipbuilding industry,household appliances,construction machinery,electronic products,engineering plastics,modular furniture and other industries..
  • It is cheap and can satisfies your practice of tapping,screw insert installation and removal.For a beginner,they are a good combination..
Check Stock

3/8-16 Nylon Insert Hex Lock Nuts Stainless Locknuts, Hex Drive, Bright Finish, 304 Stainless Steel 18-8 SS, Coarse Thread, 25 of Pack

  • Package: 25 PCS 3/8-16 Nylon Insert Hex Stainless Locknuts (Specification described in the pictures).
  • Width From Flat to Flat: 0.551 inch to 0.564 inch.
  • Overall Height: 0.438 inch to 0.468 inch.
  • High Quality Material: Made of Stainless Steel 304 (18-8) which provides good strength and corrosion resistance in bad environments without the need for time consuming and costly maintenance..
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
Check Stock

Reducer Nut, Industrial Accessory Threaded Bushing Screw Hole Repair Thread Protection Tool for Industrial Supplies

  • The thread repair socket is made of stainless steel, which has high strength and is not easily deformed during the thread repair process..
  • The wire thread insert set is fitted in the screw hole of the metal workpiece to form a high‑strength and high‑accuracy standard female thread..
  • This socket is a cost‑effective repair tool when threading errors or repairing damaged female thread holes..
  • Maintenance nuts are mainly used in aviation, automobiles, lamps, molds, mechanical equipment and other manufacturing fields..
  • The wire thread insert can be used to switch between metric and inch threaded holes, which is convenient and quick..
Check Stock

VIGRUE 315Pcs Metric 304 Stainless Steel Hex Nuts Assortment Kit for Screw Bolt (M2 M2.5 M3 M4 M5 M6 M8)

  • Type: Stainless Steel Nylon Insert Lock Nut & Washer Assortment Kit..
  • Thread Size: #8-32 #10-24 1/4"-20 5/16"-18 3/8"-16 1/2"-13 Nylon Lock Nuts | UNC Coarse Thread.
  • All lock nuts and washers are made of stainless steel 304, provides good strength and corrosion resistance in bad environments..
  • Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..
  • Warranty: Customers enjoy lifetime service for product quality problem, if you have any concerns, please contact us for a happy solution..
Check Stock

uxcell #6-32x0.414 304 Stainless Steel Helical Coil Wire Thread Insert 25pcs

  • Package Content: 25pcs x Helical Coil Insert.
Check Stock