Reviews Stainless Steel Swage Jaw

Loos Cableware 668-4X Stainless Steel Eye End for 1/8\ Diameter Wire Rope

  • Convenient package of one swage fitting for 1/8" cable.
  • 316 Stainless Steel Eye End for swaging on to Wire Rope.
  • 316 Stainless Steel for superior corrosion resistance even in salt water environments.
Check Stock

Loos Cableware 667-8X Stainless Steel Fork End for 1/4\ Diameter Wire Rope

  • Convenient package of one swage fitting for 1/4" cable.
  • 316 Stainless Steel Fork End for swaging on to Wire Rope.
  • 316 Stainless Steel for superior corrosion resistance even in salt water environments.
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

3/16\ Cable x 1/4\ Thread, Stainless Cable Railing Xtra Long Threaded Stud

  • This product is a part of the HAAS Stainless Legacy Cable Rail System Dome Swage - 3/16 inch size, Stainless Steel, Type 316..
  • Electro Polished! Using electricity in a tank of chemicals, the outer layer of the surface of the part is peeled away to expose the chromium molecules and that results in a shiny, corrosion resistant finish..
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check Stock

Lug Crimper Tool for 10 AWG - 400 MCM wire lugs- DIELESS Indent Electrical Battery Terminal Cable Wire KH-230

  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job....
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we....
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this....
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little....
Check Stock

Loos Cableware MS20667-2 Stainless Steel Fork End for 1/16\ Diameter Wire Rope

  • Stainless Steel Marine Eye Swage Fitting.
  • Type 316 Stainless for superior corrosion resistance even in salt water environments.
  • Convenient package of one fitting for 5/32" wire rope.
Check Stock

Hilmor 1839022 Swage Expander Head - 1-1/8 HVAC Swage Tool and Pipe Bender Accessory

  • SWAGE EXPANDER HEAD: A variety of heads available to make a picture-perfect swage.
  • CORRECT SIZING: Find the size that works for you. Expander heads range from 3/8" to 1-5/8".
  • COMPATIBLE: Use with hilmor's Compact Swage Tool and Pocket Size Deburring Tool.
  • VERSATILE: For use with soft metals - Copper, Steel, Aluminum, Brass tubes.
Check Stock

Muzata Cable Railing Post Intermediate Post Stabilizer 42\x1\x2\ Stainless Steel Brushed Finishing Pre-Drilled Post Top Mount for Wood Concrete Level Deck PS11 LH4L, PT1 PT2 PT6

  • This flexible wire making it easy to work with, and has a low co-efficient of stretch. Its ease of use makes it excellent for use with Thimble and Ferrule fittings as well as hydraulically swaged fittings..
  • Marine Grade T316 Stainless Steel, 1/8" diameter, 200 Feet length, 1780 lb breaking strength. 7x7 construction (7 groups of 7 strands braided together to form the cable).
  • Wear resistance, suitable for traction, pulling, strapping. Perfect for cable railing project, 7x7 cable is Sturdy, Long Lasting, and high tensile strength..
  • This type of wire rope is best used with wire rope Tec's 1/8" hand-crimp cable railing fittings. Require assorted railing Kit which include Jaw Swage Fork, turnbuckle, crimping Loop Sleeve, thimble..
  • If you don't know how to install, please feel free to contact us. If you do not like our products, we accept 30 days return, replacement and refund(Full or Partial).
Check Stock

Hydraulic Cable Crimper and Swage Tool. Great for Crimping Battery Lugs, Large Electric Cables or Swaging Stainless Steel Cable/Rope.

  • ...imp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
  • Can crimp any wire from 14 gauge to 00 gauge. Any heavy gauge electrical wire lug, connector, or terminal that needs crimping this will get the job done..
  • Great to swage stainless steel wire/rope up to 1/8th inch. Although our test show it will crimp 3/16th we do not warranty it for use on 3/16th but we always accept returns in the first 45 days. Easily make a wire rail fence around the deck, yard, or install new rigging in your boat. Anytime you're installing new steel cable this does the job with less effort..
  • Hydraulic tools allow for way more force from a much smaller package. It requires a 36" mechanical crimper/swage tool to compare to the force this tool generates. Imagine trying to crimp a battery terminal under the hood with one of those. Trust us this is better..
  • Our kit includes 8 different size die heads, these can be adjusted 180° to help accommodate tight spaces. Please note this tool requires very little effort to crimp. During our testing we had a lot of over-crimping. It should never feel like the crimp has to be forced. Especially important on the 00 electric or the 3/16th stainless..
Check Stock

Loos Cableware EY1-2X Stainless Steel Marine Eye End for 1/16\ Diameter Wire Rope

  • Stainless Steel Marine Eye Swage Fitting.
  • Type 316 Stainless for superior corrosion resistance even in salt water environments.
  • Convenient package of one fitting for 1/16" wire rope.
Check Stock

LIVTE 4 Pcs 7/8 Inch Bimini Top Jaw Slide (22mm), 316 Stainless Steel Marine Boat Hardware Fitting Awning Accessories

  • 【4 Pack & Size】4 pcs stainless steel jaw slide.
  • 7/8" inside diameter, fits 7/8" round tubing.
  • 【316 Stainless Steel Construction】Made of polished finish 316 stainless steel with rust resistance, heavy duty and weather-resistant..
  • 【Fine Polished Finish】Highly polished finish surface with corrosion resistance, smooth with no burr to prevent hurting your hands, easy for installation..
  • 【Applications】7/8 inch stainless steel Bimini top jaw slide is great for your boat or kayak canoe rigging, nice marine boat hardware fitting..
  • 【100% Money Back】For these Bimini top jaw slide, you will get a 100% customer support. Any quality problems, a replacement or a full refund will be assured..
Check Stock