Reviews Stainless Steel Solenoid Valve

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • Professional Factory - We are a manufacturer specializing in aquarium co2 systems. Our co2 generator for aquarium plants is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • High Capacity and Safe First - You could add more material: Citric acid 400g + baking soda 400 + water 600g. The capacity is twice that of an ordinary 2L bottle and half of 4L! An automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • Refine The Bubbles - Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • Low Cost - You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • Complete Accessories - steel bottle, Stainless steel pressure reducing....
Check Stock

Wyin 4L Aquarium Co2 Generator System with Single Gauge Display Pressure Gauge, DIY Co2 Generator System Kit, Automatic Pressure…

  • ...n water and absorbed by plants, keeping your aquarium full of life. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • 【What's in The Box?】 The box you receive will come with a cylinder, stainless steel pressure-reducing valve, filter, bubble counter, solenoid valve, solenoid valve power supply, solenoid valve connection cable, spare sealing ring, spare atomizer piece, 4 snap-on suction cups, one-way valve, stainless steel U-tube, 2 stainless steel atomizer, air tube, funnel, syringe, and English installation instructions.
  • 【Professional Factory & Peace of Mind After-Sales】 We are a manufacturer specializing in CO2 generator systems. Our co2 generator system is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high-pressure resistant. We have a professional after-sales group, you can contact us at any time if you have any problems with the products you buy, and we will give you a satisfactory solution.
Check Stock

ZRDR 4L Co2 Generator System with Dual Gauge Display Pressure Gauge,DIY Co2 Generator System Kit, Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium, Stable Output

  • 【Professional Factory & Peace of Mind After-Sales】 We are a manufacturer specializing in CO2 generator systems. Our co2 generator system is made of 304 stainless steel, far better than a simple plastic bottle generator, more durable, stable, safe, and high-pressure resistant. We have a professional after-sales group, you can contact us at any time if you have any problems with the products you buy, and we will give you a satisfactory solution.
  • 【New upgrade bubble counter】As the water of the co2 generator system bubble counter evaporates quickly, In view of this, we have carried out a new upgrade to the bubbler. The bubble gauge is equipped with a syringe, which can be directly used to inject water (there is a one-way valve inside the generator, only into the water without leakage). And you can also add water during use, no need to close the air outlet, no need to remove the air tube, convenient for your use.
  • 【Safety protection】 The zrdr co2 generator system 4l with automatic pressure relief valve, when the pressure in the cylinder exceeds 70KG will automatically release the pressure. A co2 generator system with a 12V waterproof solenoid valve, make y....
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve for Aquarium Plants Tanks

  • PROFESSIONAL! Professional CO2 generator system with SUS304 stainless steel bottle, regulator, bubble counter, safety valve. Far better than simple plastic bottle generators: more reliable, steady, durable, efficient..
  • SAFE! The bottle body adopts 1.5mm thickness SUS304 stainless steel(more 25% thickness than normal 1.2mm), blasting pressure up to >80kg/cm2(1137PSI), Safety valve will open automatically when it exceeds the safe pressure..
  • NEEDLE VALVE WITH BUBBLE COUNTER! Together with bubble counter, you can read your co2 flow rate directly via the bubble counter. Bubble counter with check valve function, stop water backflow to bottle. Aquarium specific needle valve, High precision fine-tuning easy for co2 to be 1 bubble in 3 seconds..
  • OPTIONAL MINI DC 12V SOLENOID! You can choose a 12V DC solenoid valve with the generator, will automatic turning on/off CO2 output with timer..
  • ATTENTIONS: Solenoid NOT included, need order seperately..
Check Stock

Aquarium Choice 6 Pieces CO2 DIY Reactor Bottle Cap Fish Tank DIY Quick Twist co2 Bottle Cap with 118 INCH Long Hoses

  • 【Support MORE raw materials】2.3L capacity and thickened wall cylinder, supporting 400g citric acid + 400g baking soda + 600ml water. Other....
  • 【304 stainless steel】Corrosion and high pressure resistant 304 stainless steel cylinder with a pressure load of 180kg/cm² (2560 psi). Safer to....
  • 【High quality solenoid valve】The bubble counter is integrated with the solenoid valve and has a built-in check valve. And the solenoid bubble....
  • 【Attention】This set contains almost all the necessary accessories, only the reaction raw materials need to be prepared by yourself..
  • 【Most parts are replaceable】Quality inspection one by one, rather than random inspection! We are serious about quality control and buyer....
Check Stock

ZRDR CO2 Generator System Carbon Dioxide 2L with Dual Gauge Display Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Plants Aquarium Stable Output

  • PROFESSIONAL FACTORY - We are a manufacturer specializing in CO2 generator system. Our CO2 generator system is made of 304 stainless steel, far better....
  • SAFE PROTECT - Automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V....
  • REFINE THE BUBBLES - OUR CO2 generator system equipped with the atomizer, refine the bubbles and make it easy to dissolve in water and be absorbed by....
  • LOW COST - Generates CO2 on your own: you only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the....
  • COMPLETE ACCESSORIES - steel bottle, Stainless steel pressure reducing valve, Filter, Bubble counter, Solenoid valve, Solenoid valve power supply,....
Check Stock

FZONE 2.5L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator Mini DC Solenid and Diffuser for Aquarium Plants Tanks

  • PROFESSIONAL FULL CO2 DIY KIT! A complete system in 2.5L size bottle, that includes SUS304 stainless bottle, regulator, Mini DC solenoid, precision needle valve, CO2 Tubing, CO2 Diffuser and easy adjustable bubble counter.
  • SAFE! The bottle body is made of 1.5mm thick SUS304 stainless steel (25% thicker than normal 1.2mm bottle). It can sustain pressure up to 80kg/cm2(or 1137 PSI). Safety valve will open automatically when the inside pressure exceeds the safety threshold.
  • NEEDLE VALVE WITH BUBBLE COUNTER! High precision, aquarium specific needle valve provides accurate fine-tuning. Steady 1 bps is achievable. Bubble counter with check valve built-in. It stops water from back flowing into your CO2 tank (protects your CO2 tanks from rust and corrosion).
  • 12V DC SOLENOID INCLUDED! Having the solenoid on a timer, you can specify when you want CO2 injection ON and for how long.
  • ATTENTIONS: Citric acid and sodium bicarbonate NOT included.
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

MagTool 4L Aquarium CO2 Generator System Carbon Dioxide Reactor Kit with Regulator and Needle Valve (4L with Solenoid)

  • 4 Liter Capacity. That is 2x larger than the size of our competitors’ CO2 generator systems. Holds 600g-800g of citric acid and sodium bicarbonate, aka baker soda powders..
  • Professional CO2 Kit With All Accessories Needed For A Complete Setup! 4 Liter SUS304 stainless steel bottle / DC mini solenoid / Regulator / Precision needle valve / Bubble counter / CO2 diffuser / CO2-graded tubing / Plastic funnel and measuring cup..
  • Safety! The wall of the bottle meets the safety requirement - 1.5mm thick SUS304 stainless steel. It can sustain pressure up to 1137 PSI (80kg/cm2). The built-in safety valve will open automatically when the inside pressure exceeds the safety threshold..
  • 12V DC Instead of AC Power. DC solenoid runs on very low voltage and generates almost no heat. The solenoid is warm to touch and is super quiet. No humming noises..
  • Attentions: The required powders to generate CO2 gas are NOT included! You will need citric acid and sodium bicarbonate powders..
Check Stock

HuthBrother Injector Tune Up SHIM Kit Fits 1994-2003 7.3L powerStroke Diesel Engines (NO TOOLS)

  • ★【Package includes】–TEN .004″ thick special stainless steel washers. (TWO TO BE INSTALLED UNDER THE ARMATURE PLATE TO INCREASE THE CLEARANCE to .004″.
  • ★【Package includes】–FORTY .002″ and FORTY .003″ stainless steel SOLENOID SPACER SHIMS. One of each placed under all four corners of the coil (for a total .005″) to increase the SOLENOID to armature clearance, when SOLENOID is energized..
  • ★【Package includes】–STEP BY STEP INSTRUCTIONS WITH PICTURES to install the two .004″ armature shims and INSTALL the .002″ and .003″ SOLENOID SPACER SHIMS (total .005″) and tips on thing to check with the valve cover off..
  • ★【 Fits Following 】–Kit Works on most HEUI injectors.
  • 1994 – 2003 7.3L PowerStroke, International T444E / DT466e / 1530E . Also works on Cat 3126B top solenoid , International Perkins 4.5L, 6.0L, & 1300edi HEUI injectors..
  • ★【After-Sales Service 】–Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply your message within 24 hours..
Check Stock

GG Grand General 69991 Chrome Heavy Duty Train Horn with Triple Brass Trumpet for Superior Sound

  • Heavy duty chrome train horn with true train horn sound at 140+ decibels.
  • Chromed brass trumpets with stainless steel brackets.
  • Operating range from 70 PSI to 140 PSI and up, 12V / 24V Multi-Voltage electric solenoid valve.
  • Requires air tank and 1/4 inch inner dimension hose (not included) for installation.
  • Optional accessories (not included) Train horn floor mount stand & air valve lever sets available in 4" (GG 69977), 7" (GG 69979) and 11" (GG 69982), Heavy duty electric solenoid valve (GG 69993).
Check Stock

mistcooling 24'' OSC Misting Fan Kit - High Pressure (2 Fans White Color)

  • Base Fan Mist Kit Includes: 2 - 24'' High velocity 3 Speed Oscillating Fan with 6 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 2- 25ft Roll of Flexible HP Tubing 1/4'' 12- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation.
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 10 Fans with 6 nozzles FAN Features: - UL 507 certified for outdoor use - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish –.
  • 10ft pre-wired 3-prong plug for 120VAC - 5600 CFM, 1/4HP, 2.4 Amps - Quiet operation - Totally enclosed, maintenance free high performance motor with thermal overload protection - Stainless Steel 6 Nozzle Mist Ring (we also offer White and Grey Color Tubing) contact us if you wish to get a different color.
Check Stock

Industrial Misting System - Patio Misting System - 250 PSI Misting Pump, Stainless Steel Tubing - For Residential. Commercial, Outdoor Restaurant and Industrial Misting Application (20 Nozzle System)

  • Base 20 Nozzle Stainless Steel Mist Kit Includes: 250 psi mid pressure pump with built-in solenoid and filtration 38ft Stainless Steel tubing for push lock (Pre-cut 2ft sections) 22ft UV coated Flexible 1/4" feed line 20- Nickel Plated Push Lock Misting Tees 1- End plug 2- Nozzle plugs 20- Nickel plated brass/stainless steel Nozzles (0.012") Stainless Steel Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • Misting Pump Features : Stainless Steel Mist Line Whisper quiet operation Built in Solenoid Valve Built in Filtration Outdoor Enclosure Wall Mountable Steel Enclosure Max Pump Pressure 250 Psi 110v AC Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable high pressure push lock fittings Stainless Steel Clamps.
  • Applications Include : Residential Patio Misting Greenhouse Humidification Commercial Outdoor Cooling Outdoor Restaurant Misting Industrial Misting.
  • Do it yourself misting system, easy to install, with Push to Connect Nickel plated fittings, rated for 1800 PSI..
Check Stock