Reviews Stainless Steel Round Head Screws

Glarks 368Pcs M6 M8 M10 Metric 304 Stainless Steel Phillips Round Head Machine Screws Hex Socket Head Cap Screws Hex Head Screw Bolts and Hex Nuts with Flat Washers Lock Washers Assortment Kit

  • ...ex socket head cap screws, 32pcs hex head screw bolts, 92pcs hex nuts, 92pcs flat washers and 92pcs lock washers. This set with different types of screws and washers can be applied to various occasions, enough for your daily use..
  • ➤[High Quality Material]: All of our screws, nuts, bolts and washers are made of 304 stainless steel, which features high strength, shiny look, premium rust, corrosion and oxidation resistance, can perform well even in bad environment. This 304 stainless steel set selects elaborately high quality fittings to give you best experience..
  • ➤[Size Details]: Our round head machine screws, hex socket head cap screws and hexagon head bolts are in 8 different sizes: M6 x 16, M6 x 25, M6 x 35, M8 x 25, M8 x 35, M8 x 45, M10 x 30, M10 x 40. Hex socket head cap screws are in 6 different sizes: M6 x 16, M6 x 25, M6 x 35, M8 x 25, M8 x 35, M8 x 45. Flat washers, lock washers and hex nuts are in 3 sizes: M6, M8, M10. This kit covers most used sizes of screws and nuts, will become good helper for you in repairing or replacing work..
  • ➤[Great Workmanship]: These screws and bolts design with high precision, compact and clean thread to achieve tight connection, not easy to fall off and loosen, smooth thread are easy to install without any bi....
Check Stock

GPM For Traxxas E-Revo 2.0 VXL Brushless (86086-4) Upgrade Parts Aluminum Full Suspension Arm Set (Front+Rear & Upper+Lower) - 8Pc Set Blue

  • Made from high quality aluminum 6061T6 for greater support and durability. Delrin collars are inserted to minimize gap and friction for a smooth and stable drive. 3D streamline design and anodized with scratch resistant vibrant alluring colors. The stainless steel ball is fixed by our special screw locking design for better security. Dual positioning holes for adjusting the stainless steel balls and the angle of rear knuckle arms to suit different road conditions..
  • Special note : Use cap head screws when setting stainless steel ball in the outer positioning hole. When setting stainless steel ball in the middle positioning hole, use set screws to tighten top and bottom to assist the installation..
  • Accessories included : Stainless Steel Cap Head Screw 3x10-8pcs.
  • Stainless Steel Round Head Screw 3x16-4pcs.
  • Original stock part number : 8631 + 8632 + 8633 + 8634..
  • Will fit : 1/10 Traxxas E-Revo 2.0 VXL Brushless (86086-4).
Check Stock

350PCS Self Tapping Screws Assortment, Black #8 Self Tapping Screws for Metal & Plastic with 410 Stainless Steel, Hex Washer Head & Phillips Round Head Self-Tapping Screws for Building & Repair

  • 【Package Contain】: 10 size of #8 hex washer head & phillips round head self tapping screws assortment kit. Include: #8 x 1'', #8 x 1/2'', #8 x 1-1/4'', #8 x 3/4'', #8 x 5/8'' self tapping screws..
  • 【High Qulity】: This self tapping screws assortment kit was made by high-quality black oxide 410 stainless steel. Have a good corrosion resistance, abrasion resistance & anti-rust, have a better durability and solidity traditional stainless steel..
  • 【2 Head Types】: The self tapping screws assortment kit contain 2 kind head: Hex Washer and Phillips Round Head. The hex washer has stronger bearing capacity and stability and the phillips drive head is convenient and quick to install..
  • 【Widely Application】: Widely used in many fields from construction to medicine. These screws can be used on a wide variety of materials (metal, plastic, aluminum, wood etc), an ideal choice for home improvement project, office, and factory use..
  • 【Well Packaging】: The wood screws assortment kit was stored with a durable transparent box. Each size of screws is placed inside a compartment and clearly labeled, making it easy for you to find, use and store at any time. We will offer a 1-year warranty and a 30-day return guarantee, if you have any issue, just feel free to ....
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • ...ping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

The Hillman Group 43794 1/4-Inch Internal Tooth Lock Washer, Stainless Steel, 50-Pack

  • Parts work best with large head screws such as round, pan, binding, and washer-head screws.
  • Included variants run from #4 to 1/2" in screw size.
  • Full assortment includes both internal and external variants.
  • Stainless steel finish for best-in-class corrosion resistance.
  • These stainless steel external toothed lock washers feature a 5/16" screw size.
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • ...ping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • ...ping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a truss with an extra flange around the outside of it to increase bearing force..
Check Stock

Hilitchi 275-Piece Stainless Steel Phillips Round Pan Head Self Tapping Screw Assortment Kit (Round Pan Head)

  • High-Quality Stainless Steel Tapping Sheet Screws Set.
  • Screw Type: Phillips Round Head Tapping Screws.
  • Material: High Quality 304 Stainless Steel, Stainless Steel With Superior Rust Resistant Ensure Long Lasting Results.
  • This set is organized by size/type in a transparent storage case for quick access and protection.
Check Stock

Swpeet 48Sets 4 Colors 8x10x10mm Chicago Screws Round Head Button Stud Slotted Screws Nail Rivet Leather Rivets Craft Belt for DIY Craft Leather Craft Repairs Decoration

  • ... plating process, keeps the luster more lasting and bright as new. paying attention to detail, each is smooth with a high quality finish, and with no casting lines, the plating and color are made to last..
  • ❤ Easy To Use ----- These are pretty sharp and You will love them! Easy to screw on and also very sturdy. The screws fit perfect.You can put these everywhere, they will definitely look cool. Wonderful products that you can’t miss..
  • ❤ Screw Type ----- These screws type is Phillips / Slotted, The Shape is Round Base. Solid Steel, nickel finish, round flat steel screws..
  • ❤ 4 Different Colors ----- We have prepared different colors for you, You can choose the color you like. These Spike and Stud can Use in leather accessories, jackets, belts, shoes, bags. Great DIY crafts & decoration supplies..
  • ❤ What You Get ----- In this kit, You wil get 4 different colors Round Head Slotted Chicago Screws. Including 12Pcs Bronze Round Head Button and 12Pcs Chicago Screws.
  • 12Pcs Round Head Button and 12Pcs Screws.
  • 12Pcs Gun-Black Round Head Button and 12Pcs Chicago Screws.
  • 12Pcs Sliver Round Head Button and 12Pcs Chicago Screws. So many pieces can meet all you Daily needs..
Check Stock

Jetovo 150 Pack 410 Stainless Steel Pan Head Phillips Self Drilling Screws Sheet Metal Tek Screws Assortment Kit - Size: #8 x 1/2' #8 x 3/4' #8 x 1'

  • High-quality 410Screw type: Phillips drive round pan head self drilling screws..
  • Stainless Steel Self Drilling Screws Assortment Kit. Color: Silver tone..
  • Material: High quality 410 stainless steel, stainless steel with Superior Corrosion Resistance..
  • The Package Contains 3 most-used sizes : 50 Pcs #8 x 1/2", 50 Pcs #8 x 3/4", 50 Pcs #8 x 1"..
  • TIPS: They are stainless 410 Stainless so they are also still magnetic, unlike 300 series stainless which is non-magnetic..
Check Stock

Hard-to-Find Fastener 014973311063 Thread Cutting Floor Board Screws, 1/4-20 x 2, Piece-45

  • TYPE 316 MARINE GRADE STAINLESS STEEL WOOD SCREWS - ideal for all exterior woodwork and construction projects..
  • FOR USE IN HIGHLY CORROSIVE APPLICATIONS - Eagle Claw Fasteners 316 grade stainless steel wood screws are recommended for use in highly corrosive coastal, wet and outdoor applications including for docks, decks, balustrades, boat building, fences, jetties, walkways, saltwater pools and general timber construction..
  • EXTREMELY HIGH MARINE GRADE 316 STAINLESS STEEL - Marine grade stainless steel wood screws prevent ugly rust stains on your beautiful outdoor timber structures, and give you a quality fastener that will outlast the timber in saltwater or high corrosion environments..
  • STAR DRIVE HEAD (TORX DRIVER INCLUDED) AND TYPE 17 POINT - Eagle Claw Fasteners stainless steel wood screws have a star drive head (torx driver included) and type 17 point for easy driving (pilot holes recommended). Nibs under the head help seat the screw. Note that these are not self drilling screws..
  • SUITABLE FOR VARIOUS WOOD TYPES - Eagle Claw Fasteners stainless steel wood screws are suitable for use with all hardwood, softwoods and pressure treated lumber including redwood and cedar..
Check Stock

415PCS #6#8#10 Pan Head Self Drilling Tek Screws Kit 410 Stainless Steel Self Tapping Sheet Metal Screws Assortment

  • 【Dimensions】Diameter: #6 #8 #10 | Head: Pan Head | Drive Type: Phillips | Point Type: #2/#3 | Quantity: 415pcs | Material: 410 Stainless Steel..
  • 【410 Stainless Steel Self Tapping Screws】Not like other uses 304 Stainless Steel, VIGRUE self tapping screws are made of 410 Stainless Steel which features harder and higher tensile strength, more corrosion resistant, will last longer than other hardware on the market..
  • 【Pan Head Self Tapping Screws Assortment】VIGRUE self drilling tek screws features sharp tip and durable deep cut Philips drive head will get the job done easily, stripping heads is a thing of the past! Including most of common used sizes, is great to have around for fixing and joining thin metal, wood, furniture, plastic and other materials..
  • 【Warm Tips for Metal Screws】The sheet metal screw of #6 allows for Max. 2.5mm carbon steel sheet.
  • #8 screws for Max. 3mm carbon steel sheet.
  • #10 screws for Max. 4.5mm carbon steel sheet to avoid breaking off. Min Breaking Torque-2.8N.M..
  • 【Professional Aftersales Service】Fast shipping, 3-7 business days to arrive. 30 days no risk-return and 2-year assurance, if you have any questions, please feel free to contact the after sales services. VIGRUE is always your trusted hardware kit supplier.....
Check Stock

VIGRUE 495pcs Wood Screws Assortment Kit 4,#6,#8,#10 Pan Head Philips Wood Screws with Case 304 Stainless Steel Self Tapping Screws for Wood

  • 【HIGH QUALITY MATERIAL】The round head wood screws assortment kit are made of high quality 304 stainless steel, anti-rust and corrosion resistance, and durable. It can be used in all kinds of extreme environment..
  • 【SCREWS ASSORTMENT】The stainless steel pan head kit includes various sizes: #4x1/4", #4x3/8", #4x3/4", #4x1", #6x1/2",#6x5/8", #6x3/4", #6x1", #8x5/8", #8x3/4", #8x1", #8x1-1/4", #8x1-1/2", #10x1/2", #10x3/4", #10x1", #10x1-1/4", #12x2". Total is 495pcs..
  • 【PRACTIAL ASSORTMENT KIT】It contains 495pcs screws, #4,#6,#8,#10 common sizes, which are most practical in daily life..
  • 【GOOD ORANIZATION】This set is organized by size in a sturdy plastic transparent storage box, and with clear size label on it. Easy to get the screws that you need..
  • 【GOOD AFTER-SALE SERVICE】If you are not satisfied with our products, please contact us directly, VIGRUE offer a replacement or refund. No hassles, no delays. If you need a single size or different quantity, welcome to contact us..
Check Stock