Reviews Stainless Steel Reducer

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

DERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 4 inch x 2 inch)

  • Bowl Reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless steel 304 for resistance to corrosion and high temperatures.
  • Tri Clamp Bowl Reducer Ferrule Size 119MM fits 4" tri clamp.
  • Tri Clamp Bowl Reducer Ferrule Size 64MM fits 2" tri clamp.
Check Stock

QMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover

  • End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
  • End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
  • Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
  • Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.
Check Stock

Easyworkz Diego Stovetop Espresso Maker Stainless Steel Italian Coffee Machine Maker 4Cup 6.8 oz Induction Moka Pot

  • [Elegant and Heat Resistant Design] Used the latest manufacturing technology and combined aesthetics to design this elegant espresso coffee pot. The heat resistant hollow insulated lid and handle grip make it convenient to use. Base is heavy gauge Magnetic stainless steel,ensuring its long life time at high temperatured heat resource..
  • [Premium Quality 18/8 Stainless Steel Moka Coffee Pot] Made of 18/8 Stainless Steel with high mirror polishing processed. The ability of anti-rust and corrosion is also the best. Can be used for all kinds of heat resource, such as gas stove , induction burner , electric cooktop.Easy to clean and disassemble. Dishwasher safe..
  • [4 Cups of Espresso ] Could brew 4 full espresso cups (6.8 fl.oz/200ml). Brew with our coffee maker, your coffee will be extra strong ,rich and aromatous. We suggest brew with 16g fine grinding coffee and water for its best tasting..
  • [Reducer&Safe Valve Included] With this coffee reducer, you could make less espresso one time to meet your unique taste. Takes less than 5 minutes to brew on heat and designed with the valve for the double safety..
  • [Well made and Inspected in Own Factory] Made and quality inspected in own factory. Over 10 years' coffee maker manufacturing experience ensures its great ....
Check Stock

Cuisinox Roma 6-cup Stainless Steel Stovetop Moka Espresso Maker

  • 6-Cup Roma Stainless Steel Moka Pot Stovetop Espresso Maker.
  • 3.5" x 7" Moka Pot is made of mirror polished, 18/10 stainless steel.
  • Stovetop Espresso Maker has an Induction base that is compatible with all stovetop surfaces..
  • Enjoy the classic Italian method of brewing espresso.
  • 1 extra gasket included. Reducer not included.
Check Stock

10Pcs M12 to M8 Thread Reducer Nuts, Stainless Steel Repair Sleeve M8 Female Thread M12 Male Thread Conversion Kit Suitable for for Plumbing Connections Compressed Air Hydraulic Automobile

  • Made of 303 Stainless Steel: The reducer nut is made of durable 303 stainless steel, which is resistant to high temperature, strong and wear-resistant.
  • Wide Range of Uses: Repair nut is an industrial fastening part, mostly used in conjunction with screws or bolts. If a thread error occurs or a damaged threaded hole is repaired, a repair nut can be used to effectively repair the threaded hole.
  • Recommendations for Use: If the M8 thread is very slippery, if you want to continue to use the M8 thread after the repair, use this method to expand the M8 thread to M10 thread, and then use the M8-M10-12 length reducer to change it back to M8, because this reduces the diameter The material is stainless steel, which will make the M8 thread stronge.
  • Wide Range of Applications: These repair nuts are widely used in aviation, automobiles, electronic communications, computers, molds, mechanical equipment and other manufacturing fields.
  • Thread Size Standard: Internal thread M8 x 1.25.
  • length: about 18 mm/0.7 inches. The thread is clear, and the thread sliding tooth restoration is more accurate.
Check Stock

US STOCK SFX M16R M3-M16 Electric Tapping Machine 1200mm Arm 360° Universal Electric Tapper 0-375RPM/min With 9pcs ANSI Imperial Collets Tap Collets

  • Tapping angle: Universal.Rotation Speed: 0-375r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials..
  • Standard Accessories Touch Panel Intelligent control system High-Precision Tapping Arm (One Set) 360° Universal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set)9pcs ANSI Collets:1/4", 5/16", 5/32 ",1/16", 3/16 ",7/32 ",3/8", 7/16", 1/2"..
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Free Shipping.ETA:7-12 days.No Import Duty.1 year....
Check Stock

QiiMii Sanitary Tri clamp Concentric Reducer Tri Clamp Clover fittings Stainless Steel 304 Reducer (Size: 2 Inch x 1.5 Inch)

  • Tri Clover Compatible Clamp Style Concentric Reducer 2" X 1.5".
  • Concentric Reducers make a smooth sanitary connection between sanitary fitting sizes..
  • Fits to sanitary stainless steel tubing at both ends.
  • A concentric reducer is often used inline on a vertical flow application, or if laid horizontally, as an increaser.
  • Suitable for use in food, beverage, and other hygienic applications.
Check Stock

4 Outer Diameter Flexible Hose Cuff Coupler & 4 to 2-1/2 Hose Cone Reducer Dust Collection Reducer Fitting with 4 Dust Collection Hose Clamps

  • EXACT REPLACeMENT 4" TO 2 1/2" CONE REDUCER - This universal-fit vacuum hose adapter connects hoses that have 4" inner diameters (ID) to hoses with 2 1/2" IDs. The cone reducer’s actual dimensions are 3 61/64" OD and 3 41/64" ID with the other end having an OD 2 15/32" and an ID of 2 9/32".
  • FITS 4-INCH DUST COLLECTION HOSES - The flex cuff’s inner diameter is 4 inches, an outer diameter of 4 9/16 inches, and a length of 2 1/2 inches.
  • FLEXIBLE RUBBER FOR VERSATILE USE - Flexible enough to provide an airtight seal even on slightly smaller or larger hoses.
  • HEAVY-DUTY HOSE CLAMPING TOOL MADE FROM PREMIUM-GRADE STAINLESS STEEL - These hose clamps are suitable for both indoor and outdoor use.
  • As they are made from premium-grade stainless steel, they have high resistance to corrosion and deformation. They can tighten perfectly around flexible hoses, pipes, and tubes for a leak-proof dust collection fitting connection.
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock

LTI Universal 6\ Length 4-Ply Reinforced High Temperature 3\ ID Straight Double Hump Coupler Silicone Hose With 3 Steel Ring (3\ RED)

  • Top Quality Stainless Steel T-Bolt Clamps, Made for Durability and Strength..
  • Designed to Clamp Tightly Without Cutting Into the Couplers..
  • Heat Resisted Rubber Reducer Coupler for Turbo, Intercooler or Supercharger..
  • Professional Installation Suggested, No Instructions Included..
Check Stock

Spectre Performance 9771 Black 4\ Intake Coupler

  • Connect any 4 inch outside diameter component or air intake tube with another 4 inch outside diameter tube.
  • Comes complete with 2 stainless steel worm gear hose clamps.
  • Comes with a 3.75 inch removable reducer.
  • Not recommended for turbo-charged/supercharged engines.
Check Stock

New Top-O-Matic Cigarette Rolling Machine

  • The new Top-O-Matic has a shorter spoon, a stainless steel chamber, a chamber reducer and a handle..
  • This cigarette machine will make king size as well as 100mm cigarettes..
  • Also comes with a 1 year manufacturers warranty..
Check Stock