Reviews Stainless Steel Fitting Valve

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

  • Features: Base 20 Nozzle Kit Contains: - 1 - Max1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
  • - 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
  • - 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
  • Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
  • Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
  • However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
Check Stock

A664 Ground Plug Valve 1/8 in 30 Psi

  • Connects Fractional Tube (Interchangable with all major brands i.e..
  • STAINLESS STEEL PLUG VALVE/3K PSI - ONE PIECE - SUPERLOK PLUG VALVE.
Check Stock

BrassCraft PSC1083 K5 Safety Plus Gas Installation Kit for Range Furnace and Boiler

  • 5/8 In. OD x 48 in. length corrugated stainless-steel gas connector with ProCoat coating to withstand prolonged exposure to harsh household chemicals.
  • Safety+PLUS Excess Flow Valve protects against gas fires and explosions - 3/4 In. MIP (with 1/2In. FIP tap) connection to gas supply or gas ball valve.
  • Includes multiple steel fittings to fit most gas appliance inlets: 1/2In. MIP (with 3/8In. FIP Tap) fitting & 3/4In. MIP (with 1/2In. FIP Tap) fitting.
  • Fits all current and most older five to six burner ranges, furnaces and boilers.
  • Temperature rating: 32 Degree to 150 Degree F. Pressure rating: 1/2 psi certified.
Check Stock

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

  • Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
  • Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
  • Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
  • Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
  • Durable brazed side fitting allows system access for various A/C service procedures.
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • ...s a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage under high pressure. The functioning working of this ball valve is very easy as it has quick connecting and disconnecting fitting. It is also easy to turn on and off..
  • SUPERIOR LEAK RESISTANCE - One of the great feature of this pressure washer ball valve is its great leak resistance with the teflon tape. With this leak free ball valve, it will definitely save your time and effort when pressure washing..
Check Stock

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

  • ...ombining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
  • Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
  • To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finger tight..
  • To withdraw the sample using a syringe: 1. Insert the needle into the red septum on the top of the fitting. 2. Withdraw the sample and r....
Check Stock

Onebrew Electric Beer Brew Kettle 2000 W 8.7 Gallon Integrated Immersion Chiller

  • Powerful Heating---120V 2000W heating element save your brew day time. NEMA 5-20 power cord, 12 AWG, 6ft. Your kitchen should have a NEMA 5-20 outlet and a 20A circuit..
  • Easy & Fast Cooling---Fixed immersion chiller Lid with stirring paddle. A stirring paddle under the lid, spin it make the cooling process as fast as a counterflow chiller..
  • Tri-Clad Bottom---The kettle bottom featuring an aluminum core sandwiched between two layers of stainless steel that can get an even heat distribution. The kettle can also be used on an induction cooktop..
  • Seamless and Heavy Duty---The kettle sidewall is seamless and 1.0 mm thick, made of one piece of stainless steel. Handles are riveted with rivets, very strong. They will last a lifetime..
  • Sanitary Grade and Food Grade---Ball valve is sanitary grade 316 stainless steel which is better than 304. Silicone tubing is included for chiller and ball valve barb fitting. They are food grade, odorless and highly transparent..
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

DERNORD Stainless Steel Ball Valve - 1/2 Inch Weldless Bulkhead for Building Home Brew Kettle/Mash Tun

  • 1/2 Inch Stainless Steel 2 piece Full Port Ball Valve.
  • 1/2 Inch weldless bulkhead fitting fits 13/16 Inch kettle hole.
  • WOG1000 working pressure rating (1000psi) to withstand high pressure and extreme temperatures.
  • Rigorous testing standards prove minimal corrosion and rust along with easy cleaning.
Check Stock

CPROSP Quick Change 12 Gram CO2 Adapter with Anti-air Leakage Gaskets

  • This fill station's connector is US CGA-320,can not fit others co2 tank..
  • 2 quick release valves prevent fumbling around or over filling ..
  • This is Straight remote hose line 37" with Stainless Steel Spring Protector, Deluxe 2 Valve style Fill Station, tank fitting and Paintball tank on/off valve..
Check Stock

Valve Stem Extenders,4Pcs 7Inch/180mm Dual Flexible Stainless Steel Braided Valve Stem Extensions,6Pieces 45 90 135 Degree Brass Valve Adaptors for Car Truck Motorhome Trailer RV Trailer Vehicle

  • ...ature 100% leak-tested nickel-plated copper valve cores and rated up to 150 PSI.Perfect fit for Truck tires, RV, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer or other heavy dualies wheel vehicles, etc..
  • Fit for trucks, RVs, campers, trailers, or other heavy vehicles.Reliable and durable:Made of copper nut and stainless steel braided flexible hose with an Heavey duty alloy clip to fix the adapter..
  • 【PERFECT SOLUTION】Check your inner dual wheel tire pressure difficult ?Start. Right Now!Just Install this schrader valve stem extension.Fast and effortless make regular tire pressure checks，increase you safety on the road..
  • 【EASY INSTALL&SAFETY】Simple to install, no tools required, The built-in core allows inflation and deflation. Just screw on, the stem fitting rotates on the extension shaft allowing you to set at any position and locks to your desired position and seals when finger tight..
  • 【PACKAGE INCLUDE】4Pcs 7Inch Stainless Steel Tire Tyre Valve Extension Adaptors,2 pieces of 45 degree extenders, 2 pieces of 90 degree extenders and 2 pieces of 135 degree extenders, 1x Valve Core Remover,enough for yours checking and inflating works..
Check Stock

TIZZE 1/2 inch Stainless Steel Ball Valve Weldless Bulkhead for Building Home Brew Kettle/Mash Tun

  • 1/2" weldless bulkhead fitting fits 7/8" kettle hole.
  • Heat resistant O ring and it will hold a really good seal on the coupler.
  • What you get are 1 "L" Shape Ball Valve, 100% satisfaction customer care and support.
Check Stock

Valve Stem Extenders,4Pcs 7Inch/180mm Dual Flexible Stainless Steel Braided Valve Stem Extensions,6Pieces 45 90 135 Degree Brass Valve Adaptors for Car Truck Motorhome Trailer RV Trailer Vehicle

  • ...valve cores and rated up to 150 PSI.Perfect fit for Truck tires, RV, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer or other heavy dualies wheel vehicles, etc..
  • Fit for trucks, RVs, campers, trailers, or other heavy vehicles.Reliable and durable:Made of copper nut and stainless steel braided flexible hose with an Heavey duty alloy clip to fix the adapter..
  • 【PERFECT SOLUTION】Check your inner dual wheel tire pressure difficult ?Start. Right Now!Just Install this schrader valve stem extension.Fast and effortless make regular tire pressure checks，increase you safety on the road..
  • 【EASY INSTALL&SAFETY】Simple to install, no tools required, The built-in core allows inflation and deflation. Just screw on, the stem fitting rotates on the extension shaft allowing you to set at any position and locks to your desired position and seals when finger tight..
  • 【PACKAGE INCLUDE】4Pcs 7Inch Stainless Steel Tire Tyre Valve Extension Adaptors,2 pieces of 45 degree extenders, 2 pieces of 90 degree extenders and 2 pieces of 135 degree extenders, 1x Valve Core Remover,enough for your....
Check Stock