Reviews Stainless Steel Exhaust Manifold

JDMSPEED New Stainless Steel Exhaust Manifold & Gasket Kit Replacement For Grand Cherokee Wrangler 4.0L Replacement For Jeeps Select 1991-1999 4.0L Engine Only Replaces 33007072 4883385

  • Pipes Have Been Upgraded To Stainless Steel.
  • Flex Joints & Flange Still Made Of Standard Steel For Natural Thermal Expansion/Contraction.
  • Package Include: 1 x Exhaust Manifold, all necessary gaskets and downpipe hardware.
  • Included heat shield, Includes flex bellows.
  • Replace Part Number: 33007072, 4883385, 674-196, 10105812.
  • Replacement For Jeep Cherokee L6 4.0L 1991-1999.
  • Replacement For Jeep Comanche (MJ) L6 4.0L 1991-1992.
  • Replacement For Jeep Grand Cherokee L6 4.0L....
  • Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

MAPerformance Investment Cast 310S Stainless Steel Exhaust Manifold Compatible with 2008-2015 Mitsubishi Lancer Evo 10 X

  • Meticulously optimized design yields a 22% average increase in exhaust flow over the OEM exhaust manifold with less imbalance between runners..
  • Investment cast 310s stainless steel construction..
  • Includes (2) allen head bolts to ease installation of the manifold to cylinder head..
  • Application: 2008+ Mitsubishi Lancer Evolution 10 X..
Check Stock

Exhaust Headers,304 Stainless Steel Polished Finish Performance Exhaust Manifold Compatible for 84-91 GMT C/K 5.0/5.7

  • 【Compatible】Fits for Chevy 283/302/305/307/327/350/400. (Please select a suitable model before purchasing)..
  • 【Make Driving Safer】Most of the enclosures and stainless steel pipe connections are equipped with reinforced pull tabs, which greatly alleviate the bumpy force of the exhaust manifold during driving, increase driving safety, and prolong the service life of the exhaust manifold..
  • 【Quality materials】Exhaust Headers made from high-strength steel, heavy duty tubes and collectors.High-quality welding for superior stability..
  • 【Production Process】All joints TIG welded for great resistance against cracking and wearing.
  • Polished surface for extra resistance against rusting..
  • 【Great Service】All products come with US stock, Fedex or USPS fast shipping.The responsible seller provides you with a 365-day warranty and friendly 24/7 customer service..
Check Stock

MBRP Exhaust S5001409 Muffler Bypass Fits 14-21 Compatible with/Replacement for Sierra 1500 Silverado 1500

  • ...EASE NOTE ON 2013 AND NEWER 4.8L, 5.3L OR 6.2L ENGINES ONLY, this will fit these motor sizes in years 2013 and newer if the oil dipstick tube is located on the passenger side of your vehicle. and it will fit any year 1999 to current models if you have a 6.0L engine in your vehicle because there is only one style of manifold for the 6.0L engine.
  • ▲ - 100% brand new and high quality, It is easy to install and uses high-quality materials that meet or exceed OEM standards. Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • ▲ - The Exhaust Manifold Bolt Repair Bracket is to stop exhaust leaks that occur between the exhaust manifold and the cylinder head..
  • ▲ - If you have any questions, please feel free to contact us, we will serve you wholeheartedly. If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days..
Check Stock

Mophorn Exhaust Header Stainless Steel Long Tube Exhaust Header Polished Manifold Header For Chevy 283 302 305 307 327 350 400 Long Tube Exhaust Header

  • High-quality Stainless Steel: This exhaust manifold has premium quality, made of high-strength polished stainless steel, through an advanced welding....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. Exhaust header collects exhaust gases....
  • Precise Dimension: Tube Diameter: 1 1/2", Collector Size: 3.00". It has a lightweight design. CNC machine flanges with TIG and MIG welded....
  • Easy to Install & Use: Gaskets and other mounting accessories are included in the package, and exhaust pipes can put more power through the wheels to....
  • Direct Fitment: These headers are compatible with 1966-1987 Chevy/GMC SBC 265-350Ci, Pickup Truck/Blazer/Jimmy 2/4WD, capable of adding instant....
Check Stock

Flanged Hex Head Bolts, Flange Bolts, Exhaust Manifold Bolt Kit M10X1.5-35mm 6-Pack

  • Aftermarket 03423 Exhaust Manifold Hardware Kit.
  • Stainless Steel construction provides strength and offers good.
  • The bolt kits are ideal for securing exhaust components and eliminating exhaust leaks.
  • Fits some Toyota,BWM,Lexus,Chevrolet models.Please check the size before purchasing.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Permatex 77124 Nickel Anti-Seize Lubricant, 8 oz., Pack of 1

  • Protects metal parts from seizing and galling at temperatures up to 2400 degree fahrenheit.
  • For use with stainless steel, titanium and nickel alloys.
  • For use under conditions of extreme pressure and temperature.
  • Recommended where copper contamination must be avoided.
  • Suggested Applications: Exhaust manifold bolts, exhaust system bolts, muffler clamps and tailpipe assemblies.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 1999 & Newer GM Trucks and SUV's With a 4.8L, 5.3L, 6.0L & 6.2L LS Engines (Driver Front/Passenger Side-Rear)

  • ... 【Special Tips】2013 AND NEWER 4.8L, 5.3L OR 6.2L ENGINES ONLY, this will fit these motor sizes in years 2013 and newer if the oil dipstick tube is located on the passenger side of your vehicle. If you have a 6.0L engine in your vehicle it will fit 100% (1999 and newer) as there is only one manifold style for the 6.0L engine..
  • 【Function and Role 】Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts. Stops exhaust leaks that occur between the exhaust manifold and the cylinder head. Make your driving quieter..
  • 【High-Quality Materials】 Exhaust manifold repair brackets made of High quality carbon steel, up to OEM standard.TIG welding for durablity and long service time.exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • 【After-sales service】Confidence originates from quality! We promise to provide one free return/exchange within 30 days. Provide customers with a truly risk-free shopping experience. If you have any problem, feel free to contact us..
Check Stock

T25 T28 4 Bolt Inlet Turbo Exhaust Manifold Gasket+Paper Gasket Stainless Steel

  • Item included: 1 x stainless steel gasket and 1 x paper gasket.
  • Gaskets Material: 1 layer Stainless Steel.
  • Fit for T25 T28 Turbo , Universal T25 T28 Gasket.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock