Reviews Stainless Steel Angles

Tenalleys 7 Pcs 7 Color Pressure Washer Spray Nozzle Tips 1/4 Inch Quick Connector Multiple Spray Degrees for Long Range Nozzle, Power Washer, Rated Up to 4000 PSI

• Value Set :1 Red Stainless Steel Nozzle Tip (0°), 1 Yellow Stainless Steel Nozzle Tip(15°), 1 Green Stainless Steel Nozzle Tip(25°), 1 White Stainless Steel Nozzle (40°), 1 Black Stainless Steel Nozzle Tip(65°), 1 Blue Stainless Steel Nozzle Tip(rinse), 1 Pink Stainless Steel Steel Nozzle Tip(soap),7 different spray angle nozzle head, to meet the different needs in life..
• Durable Material: Our nozzle head is made of high quality stainless steel, brass and plastic, which is strong and durable, will not leak, not easy to wear and can be used for a long time..
• 7 Different Angles: 7 different jet angles and patterns allow you to quickly and easily clean hard-to-reach areas such as corners, undersides of cars, crevice, and gutters, greatly improving cleaning efficiency..
• Easy to install:Easy to install and remove, can be attached to a 1/4 inch quick-connect wand within several seconds for swifter application, ideal for pressure washers up to 4,000 PSI..
• Multiple uses: Allows you to clean hard-to-reach areas quickly and easily without a ladder.Suitable for garden watering plants, car washing, fence washing, and sidewalk cleaning..

Turning Point Propeller 31502112 Express Right Stainless 3-Blade Propeller (14-1/4 X 21)

• Stainless steel prop made from 15-5 stainless steel, which gets harder and stronger with age.
• Higher rake angles tighten the vortex produced by the propellers, adding to boat lift and overall performance.
• Improves handling and boat lift through aggressive rake and cupping.
• Tuned progressive pitch angles accelerate and channel water to minimize slip and increase performance and fuel economy.

Pressure Washer Tips Power Washer Soap Nozzle Tips Multiple Degrees 1/4 Quick Connect Design Up to 4,500 PSI 2.5 GPM(5-Pack)

• 【Pressure Washer Nozzle Tips】Pressure up to 4500 PSI, 1/4-inch quick connect, 2.5 orifice size, 2.5GPM, adjusts 5 different cleaning angles..
• 【5 Different Angles】1 Red 0 Degree Nozzle Tip (Stainless Steel), 1 Yellow 15 Degree Nozzle Tip (Stainless Steel), 1 Green 25 Degree Nozzle Tip (Stainless Steel), 1 White 40 Degree Nozzle Tip (Stainless Steel), 1 Black Soap Nozzle (Brass)..
• 【Any Cleaning Area】Cleaning the underside of a mower deck, gutters, gas grill, vehicle, wheel wells, watering garden, and different spray angle allows you to clean hard-to-reach areas quickly and easily..
• 【More Application Choice】Attached to a quick connect pivot coupler and Compatible with all Pressure Washers..
• 【Keep Nozzle Tips Clean and Lubricated】We aim to provide the highest quality service and the best product quality for each customer. Place your order without any worry. If you have any question, we will unconditionally solve for you!.

IRWIN Tools Framing Square, Hi-Contrast Aluminum, 16-Inch by 24-Inch (1794447) , Blue

• Squares are used as measurement tools and for marking 90° angles.
• Squares feature a rust-proof, stainless-steel blade.
• Black, precision-etched scales are easy to read.

Twinkle Star Pressure Washer Nozzle Tips Multiple Degrees, 1/4 INCH (2.5 GPM)

• Complete set--1 Black Brass soap nozzle,1 Red Stainless Steel Nozzle Tip (0 Degree),1 Yellow Stainless Steel Nozzle Tip (15 Degree),1 Green Stainless Steel Nozzle Tip (25 Degree),1 White Stainless Steel Nozzle Tip (40 Degree)..
• High quality-- our nozzle tips are constructed from high quality stainless steel and brass..
• Pressure washers rated-- 1/4 inch quick connection design 2.5 GPM, up to 4000 PSI..
• Different jet angle-- you can choose different angles jet nozzle according to the actual needs..
• Clean easily-- allows you to clean hard-to-reach areas quickly and easily without a ladder..

MarineNow Premium Adjustable Aluminum Fluke Style Anchor Kit for 16-27 ft Boat

• 4 lb Aluminum Fluke Style Anchor assembles and disassembles for easy storage.
• Two adjustable shank angles: 32° for sand and 45° for soft mud.
• 7 Feet of 1/4" (6mm) 316 stainless steel chain.
• 2 5/16" 8mm 316 Stainless Steel Shackles.
• 100 feet of 3/8" 3 strand nylon line with stainless steel rope thimble.

KAMMQI Protractor Adjustable Stainless Angle Finder Protractor for Woodworking angle Measuring Tool with 0-180 Degrees for Carpenters & Woodworking Hobbyists 20 Cm/ 7.8 Inch

• ...nd scribe function. By locking the knurled nut in the desired position, you can quickly and accurately identify angles and draw straight lines for setting miter angles, drawing radial lines, marking and cutting angles for woodworking, or any project that requires angles..
• 【Durable Metal Construction】High quality stainless steel ensures the longevity of the product, this adjustable woodworking edge ruler body is made of stainless steel and the goniometer dial is made of hard plastic ABS, which has good durability and wear resistance and is not easily deformed. The ruler body is 2mm thick, making it both lightweight and durable. If you are looking for an accurate and sturdy measuring tool for your home, our round-head protractor is just what you need..
• 【Laser-Engraved Inscriptions】7.8-inch angle ruler including English scale and metric scale (mm). Easy-to-read precision laser engraved scales. The number and scale of the protractor dial can be clearly displayed in different environments, Save valuable woodworking time with our angle protractor. This adjustable protractor will meet the needs of many hobbyists..
• 【Customer Satisfaction Guarantee】Still hesitating to buy our metal protractor? With us, you'll enjoy a 180-day free exchange/refund guar....

General Tools 444 Depth/Angle Gage

• This easy-to-use depth and angle gage allows you to accurately measure and mark the outside, inside and sloped angles of a surface.
• The hardened steel base is grooved on both sides to deliver accurate angles.
• Permits easy setting of the protractor angle to 30, 45 and 60 degree on both sides.
• The rule can also be used as a depth gage for measuring small holes and slots.
• Spring tension nut eases depth and anglemeasuring by securing rule in milled slot at a 90 degree angle to base.
• This gage features a 6 inch by 1/4 inch etched stainless steel rule graduated in 32nds and 64ths with a 2-1/2 inch wide hardened steel base.

Cuisinart CCB-100 Triple Bristle Grill Cleaning Brush

• 18" INCHES LONG: The 18-inch-long brush complements all grill sizes and allows you to safely reach and clean all areas of your grill..
• 3 ROWS OF CLEANING BRISTLES: Three rows of stainless steel bristles cut at multiple angles optimized pattern to give you triple the power of a single-bristle brush..
• COMFORT GRIP HANDLE: The ergonomic handle is angled for more leverage making it easy to reach and maneuver in tight spots. The handle is a light weight plastic that makes it even easier to use..
• STAINLESS STEEL BRISTLES: Stainless steel wires are securely woven into 3 rows of aluminum coils that clean and shred stuck on food quickly and easily..
• STAINLESS STEEL SCRAPER: The brush features a metal scraper with notched ends for cleaning individual rungs and removing tough debris from the grates..

Accusize Industrial Tools 18 Pc Angle Gauge Set 3602-5050

• Manufactured from stainless steel, satin finished. 18 individual gages for easy use..
• Eight gaging surfaces per gage. Precision finished edges for accurate checking. Each gage checks primary, 1/2 primary and complementary angles.
• Quick and accurate inspection of angles and I.D. or O.D. chamfers in or out of the machine. Positioning of lathe tools for chamfers.
• Inspecting angles on the ground from tools and cutters. Fast set-ups and fixture of workpieces.
• Eliminates time-consuming measuring set-ups. Indispensable for every inspector, tool maker, machiNist, layout and draftsman.

24 Pieces Caulking Finisher Set, Includes 14 Pieces Stainless Steel Sealant Finishing Tool Caulk Nozzle Applicator 10 Pieces Plastic Caulking Finisher Nozzle for Kitchen Bathroom Window Brick Joints

• Package quantity: package contains 14 pieces stainless steel sealant finishing tools, 10 pieces plastic caulking nozzle tools, and the stainless steel nozzles are in different sizes to meet your sealing needs, which can help you repair the joints and clean the residual glue, improve the agglutinating quality and the aesthetic sense of surface.
• Quality material: these caulking finishing tools are made of stainless steel and plastic, rust-resistant and anti-corrosion, quality and non-sticky, not easy to break, durable to serve you long time.
• The caulking tool set is easy to clean and you can use them for many times.
• Easy to use: the caulking tools are easy and quick to use, you can sealing caulk by yourself, you can save a lot of time through smooth the sealant while the sealant coming out, they are practical tools for smoothing sealing lines, caulking lines and more.
• Wide usages for sealing: these caulk nozzle applicators can be widely applied for kitchen, bathroom, tank, door, window, kitchen, bathroom, sink joint filling finishing, etc., no need to struggle for angles and corners anymore, save you much time and effort.
• Various sizes: the stainless steel caulking finisher tools come with different sizes, which can satisfy your different sealing jobs easi....

Ka-Bar ZK-Acheron Skeleton Knife black 6 3/8-Inch

Tool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.0)

• ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.0. The working pressure is up to 4000 PSI..
• Different angle allows you to clean hard-to-reach areas quickly and easily.
• Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
• Don’t use a ladder to clean or sprinkle water for tree with these nozzles.
• More Application: Can be attached to a Quick-Connect Wand for swifter application and more.