Reviews Stainless Flanged Spigot
BTSKY™Stainless Steel Beverage Dispenser Replacement Spigot Fits 16mm（5/8 inch）Opening - No Lead Dispenser Replacement Faucet, Polished Finish
- Multifunction Replacement Spigot: stainless steel spigot for beverage dispenser, juice jar or wine barrel or or any other beverages. A great addition to outdoor parties, receptions, hotel dining rooms,or any other events.
- Quick Installation: this replacement spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick.
- Premium Quality : This Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable, good for health and with a long life with proper appliance.
- Notice: Please wash it before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten.
- Do not over-tighten, clean thoroughly after each use, keep in open position for storage.
- Excellent Flow with No Leaks: This stainless steel spigot will not only look nicer but will dispense any juice or drinks efficiently, unlike plastic or low-quality spigots that tend to leak, crack or splash water or juice everywhere, this spigot has an excellent continuous flow.
Check StockBeverage Dispenser Replacement Spigot,Stainless Steel Spigot for Water Dispenser,Drink Dispenser Replacement Faucet
- Durable: The spigot is made of high-quality stainless steel, lead-free food grade, and corrosion resistant..
- Fits Most Dispensers: This beverage dispenser replacement spigot will fit 16mm or 5/8" openings and dispenser wall thicknesses of 17mm or 11/16"..
- Widely used: Beverage dispenser replaces spigot for dispensing lemonade, kombucha, wine, sun tea, juice..
- Satisfactory choice: stainless steel spigot is a good choice to replace the plastic spigot that comes with the dispenser.
- Good after-sale service: If you have any questions about the product, please contact us, we will reply within 24 hours.
Check StockSumerain Beverage Dispenser Spigot,Premium Stainless Steel Spigot Dispenser for Jar, Juice,Cold Drink,Wine,Beer
- Beverage dispenser spigot using for gravity filter systems of cold beverages, water, juices, and kombucha Tea etc. Please carefully confirm the size of the spigot and your beverage dispenser before buying.The threads diameter is 16mm, we recommend the installation hole on your beverage dispenser is 16mm to 20mm..
- Premium quality material. made of the highest quality 304 stainless steel, this dispenser replacement spigot will not rust and no Lead included..
- Exempts disassemble cleaning design for easy clean. Please tear off the blue protective film on the escutcheon surface before installation..
- Drink dispenser spigot with quick installation design, easy to install and use. Please refer to the video for how to install this beverage dispenser spigot..
- Cartridge tested with for more than 50 million times to ensure a trouble-free operation of the stainless steel spigot..
Check Stock
Replacement Spigot Spout for Beverage Dispenser, Solid Stainless Steel Water Dispenser Replacement Faucet with Anti-Clogging Cap Polished Finished
- Quick Installation-This Beverage Dispenser Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick and for flat surface can fit up to 1 inch hole..
- High Quality-This beverage spigot is made up of food-grade 304 stainless steel and Come with stainless steel Anti-Clogging Cap, no lead and it will not rust..
- Multi-Function-This beverage spigot is great for use in beverage dispenser, wine barrel, beer equipment, coffee machine and other drink dispenser..
- Heavy Duty-This stainless steel spigot is solid and heavy duty. It is designed to replace those cheap, easy break and leak plastic spigots of drink dispenser, beverage dispenser jar or sun tea jar..
- Lifetime Warranty-Lifetime replacement guarantee, the only beverage/tea jar urn spigot replacement you need to buy. Keep contact info on packing for warranty purpose..
Check StockSumerain Spigot for Beverage Dispenser,SUS304 Stainless Steel Metal Spigot Dispenser for Jar, Juice,Cold Drink,Wine,Beer
- Spigot for Beverage Dispenser Using for Gravity Filter Systems of Cold Beverages, Water, Juices, and Kombucha Tea etc.
- Premium Quality Material. Beverage dispenser spigot is made of the highest quality 304 Stainless Steel, It will not rust and no Lead included..
- Exempts disassemble cleaning design for easy clean. Please tear off the blue protective film on the escutcheon surface before installation..
- Quick Installation design for this stainless steel spigot, easy to install and use. Please refer to the video about how to install this beverage dispenser spigot..
- Cartridge Tested with for more than 500,000 times to ensure a trouble-free operation of the drink dispenser spigot..
Check StockPush Style Spigot for Beverage Dispenser Carafe, Replacement Lever Pour Spout for Beverage Dispenser
- SIZE: threaded portion (back) is .67 inches diameter (17 millimeters).
- FOOD SAFE- Made of high quality plastics, our spigots are food and beverage safe..
- ALL NECESSARY HARDWARE INCLUDED! – Our easy to install spigot comes with all of the necessary hardware, including spigot, large o-ring, and plastic installation nut. All parts of spigot and hardware are made of durable, food safe plastics..
- LOCK OPEN LEVER! – Get the party pouring! You control the flow with our lever style handle, or you can lock the handle open for easy draining!.
- SLEEK & AFFORDABLE! – The only major difference between plastic and stainless steel spigots is the massive savings! Our plastic spigot has the attractive design and performance of stainless steel, but at the price of plastic!.
Check Stock
Beverage Dispenser Replacement Spigot, SUS304 Stainless Steel 5/8" or 16mm, Polished Finished, Dispenser Replacement
- Easily and Quickly Installation: This Beverage Dispenser Replacement Spigot requires a 5/8 inch or 16 mm diameter opening for installation. It is suitable for dispenser walls up to 11/16″ or 17 mm thick..
- Premium Quality and Healthy: The Stainless Steel Replacement Spigot is made of high quality fine food-grade #304 stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
- Multi-Function: Beverage Dispenser Replacement Faucet is ideal for dispensing tea, kombucha, wine, water jugs, mason jars and beverage containers. Suitable for all Berkey stainless steel models. Not suitable for Berkey Light..
- Easy to Clean: The Dispenser Replacement Spigot provides steady flow of your beverage and do not clog after easy installation. You can rinse thoroughly by clean water before use or clean it by dishwasher..
- LIFETIME GUARANTEE AND WARRANTY: If you don’t like our Beverage Dispenser Replacement Spigot at any time for any reason, will will give you your money back immediately. We stand behind all of our products without reservation, and we use them in our home every day..
Check Stock
Insulated Beverage Dispenser, Drink Dispenser
- 【MATERIAL】Our hot insulated beverage dispenser with spigot is made of high-quality double-layer stainless steel liner, safe and hygienic, combined with polyurethane foam material to make the heat preservation performance better. Reserved for the original flavor and nutrients of the beverage..
- 【FUNCTION-KEEP HOT AND COLD BEVERAGES】 This beverage dispenser does not have a heating function but keeps hot and cold beverages for hours.Our drink dispenser with spigot is perfect for serving coffee, tea, hot cider, hot chocolate and more for banquets, church functions, corporate events and christmas party..
- 【FOLDABLE LEGS DESIGN 】Our insulated beverage dispenser is especially designed as foldable legs ,which is convenient for you use flexibly. If you have any other questions about our hot and cold insulated beverage dispenser with spigot , please contact us and we will reply you as soon as possible..
- 【CONVENIENT】The hot and cold drink dispenser with stainless steel outer and inner body, and the insulated beverage dispenser with spigot is convenient to carry. In addition, hot and cold beverage dispenser with heavy-duty handle enables it to be easily moved from one location to another..
- 【LARGE CAPACITY & INTELLIGENT DESIGN】Our insulated bev....
Check Stock
Stainless Steel Beer Beverage Dispenser Replacement Spigot Faucet Black Handle for Coffee Jar Juice Cold Hot Water Wine Beer Drink barrel Milk tea bucket by MUGLIO(16mm)
- The Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
- This Beverage Dispenser Replacement Spigot Has Quarter-Turn Ceramic Valve. It requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
- Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
- Notice - Wash and tear off the blue protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
- Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock
hgzaccompany Stainless Steel Spigot For Drink Dispenser, Replacement Metal Spigot For Beverage Dispenser, Water Dispenser Faucet, Food Grade Metal Spout.
- Widely Applicable: The replacement spigot is made of high-quality food grade stainless steel, lead-free,anti-corrosion, very durable and good for health. Widely used in self-service drinks and restaurants, suitable for wine, water, tea, juice, etc..
- Mounting diameter: This beverage dispenser replacement spigot fits 16mm or 5/8 inch openings, and the wall thickness does not exceed 17mm or 11/16 inches..
- Note: Please clean the faucet before installation. Do not tighten the nut with excessive force. After installation, pour clean water to test whether there is leakage. If there is a leakage, tighten the nut again..
- Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
- Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock
MOLIGOU Stainless Steel Replacement Spigot with Screen Filter, 2 Pack Beverage Dispenser Spigot Replacement, Polished Finished, Fits 5/8 inch Opening
- MATERIAL: Made of solid 304 stainless steel, no lead, corrosive-resistant, can be used for a long time, two rubber washers are for a tight seal.
- SIZE: Fits 5/8 inch (16mm) openings, dispenser wall thickness could up to 11/16 inch (17mm).
- FAST FLOW WITH NO LEAKS: The stainless steel replacement spigot allows a quick, steady flow for your convenient use, comes with the screen filter to prevent the spigot from being clogged.
- EASY INSTALLATION: No tools needed, if necessary, you could use 3/4 inch wrench for the nut, but do not over-tighten, the simple construction and nice polished finished make the spigot easy to keep clean.
- PERFECT FOR: Replacing the spigot for iced tea jar, glass beverage dispenser, water crock, glass bottle container etc, as long as your dispenser has the right size to install, upgrade the containers and finish the nice look of them.
Check Stock
hgzaccompany 2 Pack Stainless Steel Spigot For Drink Dispenser, Replacement Metal Spigot For Beverage Dispenser, Water Dispenser Faucet, Food Grade Metal Spout.
- Widely Applicable: The replacement spigot is made of high-quality food grade stainless steel, lead-free,anti-corrosion, very durable and good for health. Widely used in self-service drinks and restaurants, suitable for wine, water, tea, juice, etc..
- Mounting diameter: This beverage dispenser replacement spigot fits 16mm or 5/8 inch openings, and the wall thickness does not exceed 17mm or 11/16 inches..
- Note: Please clean the faucet before installation. Do not tighten the nut with excessive force. After installation, pour clean water to test whether there is leakage. If there is a leakage, tighten the nut again..
- Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
- Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check StockStainless Works SSS010 Stainless Steel Beverage Dispenser Spigot (Fits 5/8 inch opening)
- FIRST ON AMAZON: Launched on Mar 11, 2014, Stainless Works®.
- (Registered Trademark of OLDEGG Innovations, LLC, CT, USA) is the first brand for stainless steel spigot on Amazon..
- SOLID 304 STAINLESS STEEL CONSTRUCTION: No Lead, Acid Resistant. Great for Dispensing Tea, Beverage, Vinegar or Wine..
- BEST FLOW RATE: Quarter-Turn Stainless Ball Valve, 4 Seconds Per Cup. First Picture in Open Position, Turn Right to Close..
- UNIVERSAL FIT: Needs 5/8 inch or 16mm diameter opening to install. For flat surface, can fit up to 1 inch opening..
- LIFETIME WARRANTY: Backed by OLDEGG INNOVATIONS, LLC, Connecticut, USA, the ONLY Spigot you need to buy..
Check Stock
