Reviews Stainless End Cap

YOSHIMURA 146500D520 Race RS-4S Stainless Full System for 2012-2016 Kawasaki Ninja 650 / EX650, 146500D520

  • – Stainless Pentagonal-shaped sleeve w/ Carbon Fiber End Cap — Stainless Tail-pipe.
  • – Front muffler cap functions as a polyresonant chamber which helps reduce noise.
  • YOSHIMURA Race RS-4S Stainless Full System for 2012-2016 Ninja 650.
Check Stock

RealiNice V Brake Noodle Cable Guide Pipe with Boot Set (2 Pairs)

  • 【PERFECT FIT】Fully compatible with Shimano and Avid V Brake system..
  • 【DURABLE MATERIAL】stainless steel noodle, rubber boot, alloy cable end cap.
  • 【IMPROVED PARTS】Plastic catheter with lube, reduce brake cable friction, enhance braking performance..
  • 【FULL PROTECTION】Cable end cap prevent the splitting of the end of the cable core..
  • 【2 PAIRS SET】Including brake noodle x4, rubber boot x4, cable end cap x4.
Check Stock

Muzata HT10 Stainless Steel Flat Handrail Accessories - 2pack End Cap Black POM, HA12 BNP

  • Custom designed – Muzata HA12 end cap is designed for Muzata HT10 stainless steel flat handrails. If your handrail is HT10 aluminum model, please search Muzata HA10.
  • Protection & Decoration – This end cap seals the exposed end of the stainless steel handrail with a smooth appearance. Protects the handrail from moisture intrusion while avoiding being hurt by the sharp edges.
  • High quality – It’s made of high strength POM that enables indoor and outdoor uses. It possesses good dimensional stability, high mechanical strength and environmental protection.
  • Easy to install – The end caps are weldless . It can realize effortless installation and save you more time and money.
Check Stock

QMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover

  • End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
  • End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
  • Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
  • Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.
Check Stock

SHENGHUISS 2 Pcs 1 inch Bimini Top Cap Eye End Boat Fitting Stainless Steel 316 Fits 1 inch O.D. Round Tubing with L Shape Hex Key

  • Bimini Top Cap Size: Each eye ends measured approx 1.25'' O.D, 1'' I.D, fits for 1'' O.D. round tubing. One screw on each fitting measured M6. Pin: 1/4" bolt holes..
  • 1’’ external eye end has shining polished looking and smooth touch.Perfect replacement for marine hardware and accessories, widely used for boating,bass boat,fishing boat, kayak, canoe, yacht,etc..
  • Bimini Top Cap Cast from marine grade stainless steel 316 .Seawater corrosion resistance. stainless steel 316 bimini top eye end is a perfect choice to replace your plastic, nylon or broken fittings..
  • Outside eye end for bimini top,This product is suitable for 1 inch tube, We use the international standard 1 inch tube for dimensional inspection to ensure that each product can be installed normally.
  • Package Includes:2 pieces of Bimini top cap and 1 piece of L Shape Hex Key.
Check Stock

6 Pieces 1.5 Inch Sanitary Fitting Cap Stainless Steel 304 Sanitary End Cap Pipe Fitting Clamp Solid End Caps Blind Tri Caps Clamp for Dairy Products Food Wine Beverage Cosmetics Engineering

  • What you get: You will get a total of 6 sanitary tube caps suitable for 1.5 inch clamps, beautiful internal and external polishing, beautiful internal and external mirror surfaces, and smooth surface, acid and alkali resistance, corrosion resistance.
  • Quality material: this sanitary fitting cap is made of quality stainless steel 304, therefore, it's sanitary, rust and resistance to corrosion and high temperatures with long service life.
  • Easy replacement: it is standard size and regular material parts compatible with most standard size clover or clamp fittings, the solid end cap should be combined with a gasket and clamp to make a sanitary and easily cleanable connection.
  • Sealing performance: this stainless sanitary fitting cap has good sealing performance, it is clamping on to the end of a pipe or tube to close the line, providing a non-permanent seal that provides take down access.
  • Widely use: these stainless steel end caps can be applied in the dairy products, food, wine, beverage, cosmetics, mechanical and electrical engineering, mechanical manufacturing and and other sanitary process industries.
Check Stock

SHIMANO Dura-Ace Polymer-Coated Stainless Steel Derailleur Cable

  • Polymer-coated inner cables reduce the sliding resistance to achieve lighter and quick operation Cables are formed with curved surface for low friction STAINLESS STEEL CABLE for anti-rust protection Shifter cable end ø 1.2mm x 2100mm incl. inner end cap Outer cap with long tongue (2pcs.).
Check Stock

AA-Racks Universal Conduit Carrier Kit Fit 6' PVC Pipe, No Drilling Required, Black

  • Can be used on most Truck Racks / Van Racks / SUV Racks.
  • Cast Aluminum door and end cap, Stainless Steel saddle brackets U-bolts and hardware.
  • Spring loaded door latch and urethane gasket for weather resistance.
  • The end cap comes with the rotary tongue lock.
  • Required for Assembly: 6" pvc pipe (actual 6.625"), silicon or butyl sealant.
Check Stock

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Cap, 1/16\ Tube OD

  • Cap for closing the end of a pipe or fitting.
  • Fitting connects to tubing on its open end.
  • Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
  • Operating temperatures range from -100 to 1000 degrees F.
  • Meets ASTM standards A213 and A269 for quality assurance.
Check Stock

Yoshimura 2013-17 Kawasaki Ninja 300 Street R-77 SO SS-CF-CF (Street/Carbon Fiber with Carbon Fiber End Cap)

  • The popular R-77 offers outstanding performance, thanks to being developed in the heat of competition..
  • It features a trapezoidal design, which allows a large volume of packing material and in turn delivers top performance..
  • The R-77 muffler’s front cap is MIG-welded, while the end cap is riveted using high-end 304-L polished stainless steel rivets and bands..
Check Stock

NearMoon Standing Paper Towel Holder, Kitchen Paper Towel Roll Holder- for Bathroom Kitchen Countertop, Standard or Jumbo-Sized Roll Holder, with Marble Base (Matte Black)

  • 【Rustproof】NearMoon standing paper towel holder is constructed by superior 304 stainless steel with marble base, solid and never rust. Suitable for humid environments..
  • 【Elegant and Durable Marble Base】NearMoon standing paper towel holder with heavy weighted natural marble base is more stable and attractive than the others, and the marble base with high wear resistance brings your home a beautiful style and appealing taste..
  • 【Non-Slip Pad Design】3 Non-slip circular pads at the bottom of towel bar base, which can make the paper towel holder stable and keep it from moving..
  • 【Large End Cap】Freestanding paper towel holder with large end cap can prevent paper from jumping when tearing it. Besides, the rod of paper towel holder with end cap helps you moving it easily to anywhere..
  • 【No Installation Required】This towel holder don’t need any installation required. Easily tighten the paper towel bar with the base screws, then you can use it right now..
Check Stock

NearMoon Standing Paper Towel Holder, Kitchen Paper Towel Roll Holder- for Bathroom Kitchen Countertop, Standard or Jumbo-Sized Roll Holder, with Marble Base (Brushed Gold)

  • 【Rustproof】NearMoon standing paper towel holder is constructed by superior 304 stainless steel with marble base, solid and never rust. Suitable for humid environments..
  • 【Elegant and Durable Marble Base】NearMoon standing paper towel holder with heavy weighted natural marble base is more stable and attractive than the others, and the marble base with high wear resistance brings your home a beautiful style and appealing taste..
  • 【Non-Slip Pad Design】3 Non-slip circular pads at the bottom of towel bar base, which can make the paper towel holder stable and keep it from moving..
  • 【Large End Cap】Freestanding paper towel holder with large end cap can prevent paper from jumping when tearing it. Besides, the rod of paper towel holder with end cap helps you moving it easily to anywhere..
  • 【No Installation Required】This towel holder don’t need any installation required. Easily tighten the paper towel bar with the base screws, then you can use it right now..
Check Stock

Yoshimura 05-06 Kawasaki ZX636 RS-5 Slip-On Exhaust (Street/Carbon Fiber)

  • The RS-5 is one of Yoshimura’s most popular pipes, and for good reason..
  • Its trapezoidal shape appeals to the eye and really captures the spirit of racing..
  • It also complements the look of any sportbike, following the race-inspired lines of today’s under-tail muffler configurations..
  • The RS-5 features a straight baffle with a removable low-volume insert, and trick carbon fiber cone-shaped end cap.Trapezoid-shaped sleeve.Large volume of packing material.Straight baffle for ample flow.Carbon fiber end-cap.Stainless steel tail-pipe.Step-.
  • These exhaust systems are designed with nothing but power in mind..
Check Stock