Reviews Stage Amplifier

Parasound NewClassic 200 Integrated Amplifier

  • Integrated amplifier with built-in DAC and MM phono stage.
  • Class D amplifier stage designed by renowned Danish company Pascal.
  • 110 watts-per-channel RMS at 8 ohms, 110 watts-per-channel RMS at 4 ohms.
  • Phono input for MM or MC cartridges, Pure analog signal path for all analog inputs.
  • Analog bass management includes 12 dB/octave high-pass crossover, adjustable 20 Hz-140 Hz.
Check Stock

Hifonics TPS-A500.2 THOR Series Class-D 2-Channel 2-Ohm Stable Powersports Amplifier For Polaris RZR/ATV/UTV/Cart/Boat

  • Hifonics TPS-A500.2 500W Peak THOR Series Class-D 2-Channel 2-Ohm Stable Powersports Amplifier.
  • MARINE GRADE PROTECTION: Amplifiers are ABYC and ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist....
  • PRE-AMP CIRCUITRY: Low Noise Pre-Amplifier Stage Special preamplifier reduces incoming noise from source units dramatically improving sound quality.
  • CLASS / TOPOLOGY: Full Range Class D Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink..
  • DIAGNOSTICS: Three-stage protection circuits Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end....
Check Stock

Fifine Headphone Amplifier 4 Channels Metal Stereo Audio Amplifier,Mini Earphone Splitter with Power Adapter-4x Quarter Inch Balanced TRS Headphones Output and TRS Audio Input for Sound Mixer-N6

  • 【Share A Single Stereo Source】Amplifier 4 channel with separate volume knob for each of up to four outputs: No audio crackle, minimal distortion at highest volumes. No loss of signal when all four headphones are connected. Headphone amplifier 4 channel would be excellent for up to four people monitoring the mix for tracking, live uses and listen to the TV with earbuds while working out..
  • 【Fantastic Stereo Audio Quality】Mini stereo amplifier with 4X 1/4'' Stereo Headphone TRS Output Connector Jacks, 1/4'' TRS Source Input Connector Jack. ◆Stereo ◆: You must use the 1/4” TRS stereo audio cable male to male connectors for input and output connection. ◆Mono◆: 1/4” TS male to male connectors for input and output connection. ■■TRS/TS cable is not included in package■■.
  • 【Compact and Portable】Solid metal build construction headphone splitter, tight connections, smoothly operating knobs. Quality components and exceptionally rugged construction ensure long life. Ultra-compact headphone distribution amplifier for studio and stage applications..
  • 【Used for Applications】Features a durable and compact design headset amplifier perfect for both on-stage and in-studio performances or application that requires multiple headphone connect....
Check Stock

REGA Fono Moving Coil MK4 Phono Stage

  • The Rega Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge..
  • The Rega Fono MC has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MC uses the Linear Systems low noise LSK389 FET in an all discrete input stage where low noise and linearity are vitally important to get the best from an MC cartridge.
  • A MUSE operational amplifier is used in the RIAA equalization amplifier. Polypropylene capacitors have been used in the signal path and in the RIAA equalization circuits..
  • The aesthetic design of the Fono MC was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MM amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers.
  • Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB) RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1..
Check Stock

Fender Small Amplifier Stand

  • STAGE RISER - ADJUST TO YOUR DESIRED ANGLE FOR THE BEST STAGE MONITOR SPEAKER SOUND: How do you like your sound? Coming straight at you? Bouncing off the ceiling? Or just slightly tilted up toward your ear? With the tilting top on the Griffin Guitar Amplifier And Floor Monitor Speaker Stand, you can hear it any way you like. A standard PA speaker stand does not give you the flexibility of full low-level tilting capabilities that you might need on a DJ stage platform..
  • TILT BACK AND LIFT UP - FIND THE PERFERCT HEIGHT FOR YOUR AMP GUITAR STAND: As if angle adjustment wasn’t enough, Griffin has incorporated dual height adjustment into the design of our Guitar Amp/Speaker/Video Monitor Stand. Your new stand is fully adjustable from 23 – 32 inches using the four pre-drilled height adjustment holes and spring-loaded locking pin as well as the back leg which sweeps open from 13 -24 inches. This Griffin stand is as full of versatility as it is value..
  • ON STAGE AMP STAND QUICKLY FOLDS UP IN SECONDS FOR CONVENIENT MOBILITY: This Griffin Guitar Amp/Speaker/Video Monitor Stand folds up quickly and easily for the musician on the go. The stand's ergonomic design is useful when you have limited space to pack a lot of gear and it’s lightweight… always useful w....
Check Stock

REGA Fono MM Phono Stage

  • The new Rega Fono MM phono stage has been designed to be effective, easy to use, and above all, to reproduce music..
  • The Fono MM uses a fully discrete, cascaded, complementary amplifier input stage, a configuration designed to optimise the performance of your moving magnet cartridge..
  • The RIAA equalization has been split into two stages to minimise interaction. Polyester capacitors have been used in the signal path and polypropylene capacitors are used in the RIAA equalization circuits..
  • The aesthetic design of the Fono MM was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MC amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers..
  • Input sensitivity = 1.7mV for 200mV output, Input loading = 47KΩ in parallel with 100pF, Maximum input level = 60mV at 1KHz, Recommended minimum output load resistance = 5KΩ.
Check Stock

VOX Valvetronix VT20X Modeling Amplifier,Black

  • |20 Watt Modeling Amplifier| The VT20X is rated at 20 Watts making it the ideal choice for an at-home amplifier, combining sophisticated modeling....
  • |12AX7 Preamp Tube| Multi-stage Valvetronix tube preamp design incorporates authentic analog circuitry to achieve the subtle tonal adjustments and....
  • |Ultimate Versatility| 11 realistic amp models and 13 high quality on-board effects allow you to craft your signature tone, and save it across 33....
  • |AUX In & Headphone Out| Aux in jack and headphone output make silently practicing or recording simple. Use the USB connection to dive deeper into....
  • |Small But Loud| The compact combo amplifier is designed with a tightly sealed cabinet and a proprietary bass-reflex design to deliver stunning....
Check Stock

SoundArtist SA-200IA Stereo Amplifier HiFi Integrated Amplifier 200W+200W with Remote Control Black

  • With a remote control,Front panel with knobs to adjust treble and bass..
  • 200W High Power,High-power high-quality professional pure copper transformer, high-quality filter capacitor.
  • the latter stage uses double differential....
  • This amplifier is very good at Base, and there is a Tone Control to set the Bass and Treble..
  • One group of RCA output, it can be a preamp to connect another power amplifier to play dual amplifier, or connect an Active Subwoofer to get a 2.1....
Check Stock

AD8318 Logarithmic Amplifier Multiplier Detector Module 1M-8GHz 70dB Dynamic ALC AGC Control

  • Application to RF transmitter PA setpoint control and level monitoring RSSI measurement in base stations, WLAN, WiMAX, and radars.
  • It employs the progressive compression technique over a cascaded amplifier chain, each stage of which is equipped with a detector cell.
  • The AD8318 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output voltage.
  • Small footprint LFCSP,Integrated temperature sensor,Fabricated using high speed SiGe process.
  • The AD8318 can be configured to provide a control voltage to a VGA, such as a power amplifier or a measurement output, from Pin VOUT.
Check Stock

NAD C368 Integrated Amplifier

  • Audiophile integrated amplifier with a hybrid circuit design.
  • Vacuum tube input stage and solid state output stage.
  • Built-in DAC and oversize toroidal transformer.
  • Playable Digital Formats: WAV, FLAC, APE, LPCM, MP3, ACC, AC3, WMA.
  • Inputs: 2 x Stereo RCA, 1 x optical, 1 x Coax - Outputs: 1 x Stereo Rec Out, 1 x Stereo Pre Out, 2 x 2 Speaker terminals, 2 x Power Control (3.5 mm....
Check Stock

2) Rockville RSM12P 12\ 2000 Watt Passive Stage Floor Monitor Speakers and Amplifier

  • Package Includes: (2) Rockville RSM12P 12" 2-Way Passive Stage FloorMonitor Speakers Totaling 2000 Watt. (1) Rockville RPA5 1000 Watt Peak / 500w RMS 2 Channel Power Amplifier Pro/DJ Amp. Rockville RSM12P 12 1000 Watt 2-Way Passive Stage Floor Monitor Speaker. 250 Watt RMS / 500 Watts Program Power / 1000 Watts Peak. High power 12'' woofer with 2.5 KSV voice coil provides incredibly deep bass and acoustic power.
  • Exclusive horn design delivers ultra-wide 70-degree x 50-degree sound dispersion. Extreme high power handling capability extremely loud. Superior sound quality with transparent tonal response. Frequency Response: 45Hz-20KHz. Maximum SPL @1w/1m: 93dB peak. High-power 2-way pro sound stage monitor speaker system for live sound and playback applications. Wedge shaped enclosure provides the perfect angle for stage monitoring use..
  • Compact and light weight system delivers distortion free sound even at extreme SPL. Great power to weight ratio. State-of-the-art 1'' titanium diaphragm compression horn driver for crystal clear high frequency reproduction. Ultra-wide dispersion, large-format Elliptical wave guide horn. Custom Molded Steel Grill. Ergonomically shaped handle for easy carrying and setup. Aviation Grade Black Carpet. Rubber Isolating Feet. S....
Check Stock

Oumefar High Precision Logarithmic Amplifier Multiplier Detector AD8318 70dB Logarithmic Detector Dynamic ALC AGC Control

  • Application to RF transmitter PA setpoint control and level monitoring RSSI measurement in base stations, WLAN, WiMAX, and radars.
  • The AD8318 is a demodulating logarithmic amplifier, capable of accurately converting an RF input signal to a corresponding decibel-scaled output voltage.
  • It employs the progressive compression technique over a cascaded amplifier chain, each stage of which is equipped with a detector cell.
  • The AD8318 can be configured to provide a control voltage to a VGA, such as a power amplifier or a measurement output, from Pin VOUT.
  • Small footprint LFCSP,Integrated temperature sensor,Fabricated using high speed SiGe process.
Check Stock

SPL Phonitor One D Headphone Monitoring Amplifier with 32-Bit DA Converter

  • The Audiophile Headphone Amplifier with innovative Phonitor Matrix, 32-bit DA-converter and outstanding sound quality. For us the sound is always in....
  • 32-Bit DA-Converter. The converter chip used is the Premium AK4490, a new generation of premium 32-bit DACs equipped with AKM’s Velvet Sound. This....
  • Two Burr-Brown OPA 2134 SoundPlus operational amplifiers provide the pre-amplification. These are specially designed for audiophile circuits and are....
  • The output stage of the headphone amplifier is designed as a push-pull amplifier in class AB mode. The bipolar transistors share the amplification of....
  • Two analog stereo inputs and one digital USB input can be connected to Phonitor One d. The computer, tablet or phone are preferably connected via USB.....
Check Stock