Reviews Ssd Cage

SMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K, Compatible with BMPCC 4K & 6K - KCVB2419

  • 【ORIGINAL DESIGN】SMALLRIG Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K includes an integrated full cage, a top handle, and an SSD holder. The basic handheld kit for Blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K.
  • 【MOUNTING POINTS】SMALLRIG 2419 features multiple mounting points including NATO Rail, 1/4"-20 & 3/8"-16 Holes, Locating Holes for ARRI, and Cold Shoe Mount. The cage rig for BMPCC 4K & 6K is locked by 1/4”- 20 screws on both the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches.
  • 【FOR HANDHELD SHOOTING】This Top Handle from SmallRig features a shoe mount for microphone and LED lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft.
  • 【Mount for Samsung T5 SSD】The SSD holder is fixed to the cage by....
Check Stock

Tiltaing Camera Cage for BMPCC 6K Pro Basic Kit TA-T11-B-B Blackmagic Pocket Cinema Camera Rig (Basic Kit Black)

  • [PROTECTIVE ARMOR] for BMPCC 6K Pro Minimizes Wear and Tear Over Time.Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro. [MOUNT ACCESSORIES] via NATO Rail, Arri Compatible Rosettes, Cold Shoe Receivers, 1/4"-20 Threads with Locating Pins..
  • [QUICK RELEASE TOP HANDLE] Provides More Flexibility When Operating and Handling.The included Quick Release Top Handle can be attached to the top of the cage via a cold shoe receiver and ¼”-20 screw. This provides an extremely secure connection to comfortably handle and operate your camera system..
  • The Top Handle features additional ¼”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs..
  • [RECORD TO SSD] via the T7 Drive Holder and Mountable USB-C Cable.The SSD Drive Holder attaches directly to the Cage via a 1/4″-20 screw and locating pin. It can then clamp onto a T7 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card. The included USB-C cable is able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port.....
Check Stock

MAGICRIG BMPCC 4K / BMPCC 6K Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K / 6K

  • MagicRig Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K . This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera..
  • Perfectly compatible - Form-fitting design with unobstructed battery & SD card access.Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
  • Multiple mounting interfaces.This cage equipped with built-in cold shoes and multiple 1/4'' & 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
  • T5 SSD holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
  • It consists of a cage with a Top handle and a T5 SSD holder. This top handle equipped with built-in shoe mount for microphone and LED lights also provides 1/4" & 3/8" mounting points....
Check Stock

SMALLRIG Camera Cage Accessory Kit for BMPCC 6K Pro, with Top Handle Wooden Side Handle HDMI Cable Clamp SSD Clamp Sunhood NATO Rail Screen Protector for Blackmagic Pocket Cinema Camera 6K Pro- 3299

  • 【For BMPCC 6K Pro】SmallRig Camera Accessory Kit 3299 is specially designed for BMPCC 6K Pro. The package include Camera Cage 3270/Top Handle 2362/Side Handle 2187/Sunhood 3273/SSD Cable Clamp 3300/HDMI Cable Clamp 3271/NATO Rail 2172/Screen Protector 3274..
  • 【Mutifuctional Cage】Special designed aluminum-alloy full cage 3270 can be split as a half cage.The built-in Mount for T5 SSD takes up very little space and improves compactness and suits SSD & USB-C cable clamp to ensure stability and smooth data transmission while shooting. Featuring with multiple 1/4"-20 threaded holes that support additional camera accessories. The threaded holes on the bottom support to attach Quick Release Plates 1280 & 2146 and stabilizer of DJI RS2..
  • 【NATO Top Handle & Side Handle】The NATO top handle 2362 can rotate 360 degrees and secures to any cage with nato rail on the top or side, and features multiple 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The NATO side handle 2187 fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly..
  • 【Screen Protect】The sunhood 3327 is easily removable and does not interfere with the flip of the screen, hence a better screen display under strong outdoor light. Besides, t....
Check Stock

MAGICRIG Camera Cage Kit Compatible with BMPCC 6K Pro & 6K G2 for Blackmagic Pocket Cinema Camera 6K Pro & 6K G2

  • 【For BMPCC 6K Pro / 6K G2】MAGICRIG Camera Accessory Kit is specially designed for BMPCC 6K Pro / 6K G2. The cage secures to the camera via a 1/4’’ screw on the top and two 1/4'' screws on the bottom to prevent wiggles, and comes with rubber pad at the bottom to protect the camera from scratching..
  • 【Multiple mounting points】The MAGICRIG cage with abundance of 1/4’’ and 3/8'' thread holes and several ARRI-style mounts for mounting additional accessories, such as ball head, rod clamp, magic arm, handle, etc..
  • 【Full accessibility】The cage would not block any buttons on the camera and you are able to access not only the battery but even the audio slot, USB-port, HDMI-port..
  • 【Top Handle】This handle can be fixed on the top or side of the camera cage with 2pcs 1/4'' screws. This handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need..
Check Stock

PROIAM Director's LCD Monitor Cage for Atomos, Shogun and Ninja Assassin Video Monitors (P-at-DMC)

  • PROTECTIVE CAGE for Atmos shogun & Ninja Assassin 7” recording monitor.
  • QUICK ATTACHMENT with SUNHOOD for perfect contrasted image under bright sun.
  • WIRELESS MONITORING SOLUTION for directors to keep check on shot composition.
  • SSD CARD PROTECTION: The anti-off device on the cage prevents the SSD from sliding..
Check Stock

MAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K

  • MagicRig Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.【Not for BMPCC 6K Pro!】.
  • Perfectly compatible - Form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
  • Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
  • T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
  • It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, als....
Check Stock

SMALLRIG Cage Kit and Sunhood for Atomos Shogun 7 CMA2409

  • 【Multiple Threaded Holes】The cage mounts to the monitor by two 1/4’’-20 screws on the top and bottom. Across the cage features multiple 1/4’’-20, 3/8’’-16 holes, and ARRI-standard locating holes allowing mount of accessories, such as SmallRig V-mount Battery Plate 1846 and SmallRig Mounting Bracket for Teradek 2107..
  • 【Built-in NATO Rails】NATO rails are also provided along both top and bottom to allow use with a range of SmallRig mounts such as SmallRig Ball Head Magic Arm 2071 or the 2072 for quick release..
  • 【Come with HDMI Cables】The cage includes a cable clamp that works with a range of HDMI cables. It is attached on the left to protect the HDMI cables and ports..
  • 【Features Drive Lock】The cage also features a drive lock that prevents the SSD on the back from accidentally falling off..
Check Stock

SMALLRIG SSD Mount Bracket SSD Holder for Samsung T5 SSD for SanDisk SSD for SanDisk SSD T5 Compatible with SMALLRIG Cage for BMPCC 4K & 6K for Z Cam E2 & for Sigma fp - BSH2343

  • 【UNIVERSAL HOLDER FOR SSD】Firmly secure your SSD on your camera or camera cage, you can choose SmallRig external SSD Mount BSH2343. This....
  • 【MOUNTS ON CAMERA DIRECTLY】This holder could mount an SSD directly on cameras such as for BMPCC 4K & 6K, for Z Cam E2, and for Sigma fp.
  • 【FLEXIBLE INSTALLATION】This holder comes with a detachable cold shoe which can be fixed on the bottom or side of the holder, so you can mount the....
  • 【USB-C CABLE CLAMP INCLUDED】It comes with a cable clamp to fix the USB-C cable, fastened by a knob screw. This SSD holder is compact and versatile....
  • 【RUBBER CUSHIONS】The external SSD bracket features soft protective rubber pads inside, keeping the SSD securely in the clamp and preventing....
Check Stock

SmallRig Battery Grip Compatible Cage Only for BMPCC 6K Pro, Comes with Built-in NATO Rail & Locating Holes for ARRI and Cold Shoe Mount - 3382

  • 【ONLY FOR BMPCC 6K PRO】SmallRig Full Cage 3382 is specially designed for Blackmagic Design Pocket Cinema Camera 6K Pro and its related battery grip. It would not block any buttons on the camera. It can also be disassembled and used as a half cage. Furthermore, it adopts ergonomically design on right side, hence a comfortable grip experience..
  • 【ANTI-TWIST FUNCTION】SmallRig 3382 firmly locks via a 1/4"-20 screw on the top and two on the bottom to prevent wiggles, and comes with rubber pads at the bottom to prevent scratching. Lightweight design with only 355g, the cage is made of premium aluminum alloy, with matte surface and strong oxygen resistance..
  • 【MULTIPLE MOUNTING POINTS】It is equipped with multiple mounting points, such as 1/4" & 3/8" threaded holes, cold shoes, NATO Rail and locating holes for ARRI, allowing you to connect more accessories such as SmallRig Top Handle 2165, and SmallRig SSD Holder 3300 for Samsung T5 SSD, etc..
  • 【FEATURED RECOMMENDATIONS】It features a NATO rail and multiple 1/4" threaded holes on the left side, that could attach NATO Side Handle 2187 for handheld shooting and dedicated HDMI & USB-C cable clamp 3271 for stable signal. The holes at top-right corner and bottom-left corner allow access to follow focus r....
Check Stock

SMALLRIG Monitor Cage for Atomos Shogun Ninja Assassin - 1788

  • It’s only compatible for Atomos Shogun and Ninja Assassin (Shogun Inferno, Shogun Flame, Ninja Inferno, Ninja Flame, Shogun Studio and other monitors CAN NOT be used on this cage).
  • This device comes with arrays of 1/4″-20 & 3/8″-16 accessories mounting holes for extended functions.
  • A NATO rail on each end of the top for attaching NATO rail clamps.
  • anti-off device to prevent the SSD card from sliding.
  • equipped with a NATO rail on the bottom to attach NATO rigs.
  • Enable an access to mount the SmallRig sunhood for Atomos Shogun and Ninja Assassin Monitor.
  • Package includes: 1 * monitor cage, 1 * cable clamp, 2 * 1/4″-20 screws.
Check Stock

KONDOR BLUE T5 SSD Holder w/Cold Shoe Mount for Z CAM S6 F6 F8 BMPCC4K/6K. Compatible with Any cage or hot Shoe. Made for Samsung T5 Media Drives commonly Used with Kondor Blue USB C Cable.

  • Holder acts as a cage and protects the T5 SSD from any bumps or dings.
  • USB C cable clamp ensures no accidental unplugging.
  • Can mount directly to any cage via cold shoe or standard screws (Kondor Blue Cage and Cable recommended).
  • This is a KONDOR BLUE Premium Product from an American Company!.
Check Stock

Tiltaing Camera Cage for BMPCC 4K/6K Basic Kit | Tilta Gray | Compatible with Blackmagic Pocket Cinema Cameras | Top Handle, SSD Drive Holder, USB-C Cable, HDMI Adapter Included | TA-T01-B

  • This kit includes Full Camera Cage for BMPCC 4K/6K, SSD Drive Holder for Samsung T5, Quick Release Top Handle, 90-Degree USB-C Cable (20cm), and HDMI 90-Degree Adapter for BMPCC 4K.
  • Modular "Tiltaing" design allows you to mix and match parts to build the perfect rig.
  • Protects, adds handling options, SSD holder, and more.
Check Stock