Reviews Ss Intake Manifold Gaskets

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

  • Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
  • Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
  • Molded to Factory Dimensions for a Perfect fit.
  • Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.
Check Stock

Tektall Alloy 1\ Intake Manifold Spacer Replace for Ford GT-40 5.0 Mustang explorer Cobra 1987-1993 Durable

  • 【Good Quality】 Tektall 1" Intake Manifold Spacer made of High quality alloy.Sturdy and durable, and has reached OEM specifications..
  • 【Fitment】Tektall Alloy 1" Intake Manifold Spacer fit for Ford Mustang 5.0L GT-40 explorer Cobra 1987-1993 year..
  • 【Product Dimension】 THICKNESS 1" Made of High quality alloy..
  • 【High Performance】Tektall Intake Manifold Spacer can reduce heat transfer from the engine to the intake manifold. The result is a colder IAT (don’t forget, colder air is more dense, which means more horsepower!). The end result is increased horsepower and allowed to increase time with fewer explosions..
  • 【Package Includes】 1 X Intake Manifold Spacer, 2 X Gaskets, 1 X Mounting Hardware kit. Please confirm the item if it matches your machine before you purchase..
Check Stock

POSENG LS LS1 LS2 LS6 Intake Manifold with 102mm Throttle Body Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Corvette Chevy SSR Cadillac CTS Pontiac GTO Firebird Saab 9-7X

  • 1.APPLICATION: For Cathedral Port LS1/LS2/LS6 Heads (for LS 4 bolt intake with cable drive only, not for drive by wire).For Specific Model Compatibility, please check the model list in the description.
  • 2.COMPATIBLE WITH: 1997-2004 Chevrolet Corvette.
  • 1998-2002 Pontiac Firebird Formula, Trans AM.
  • 3.NOTE: This intake manifold works well with 102mm Throttle Body, it can also work with 92mm throttle body (May be loose)..
  • 4.ROBUST PERFORMANCE: Made of 3MM thickness T6061 Sheet Aluminum, stay stable as always..
  • 5.PACKAGE INCLUDES: Intake manifold without rear map sensor port, 92mm throttle body, throttle position sensor (tps), gaskets, hardware, fuel rails, fuel crossover line.Injector not included..
Check Stock

Skunk2 372-05-0275 Thermal Intake Manifold Gasket for Honda D-Series Engine

  • With the use of Skunk2 thermal gaskets, air intake temps are minimized which provides the your engine cooler air for combustion, and that means....
  • This and bypassing several heat sources can provide you up to 5 percent more power.
  • Skunk2 Racing thermal intake manifold gaskets are perfect for your....
  • Protects against heat soak and reduces the incoming air temperature before it reaches the cylinder head.
  • Reduces heat transfer into the intake manifold.
Check Stock

E-Tuner 4

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

Mid Valley - 102mm Intake Manifold & Throttle Body For Cathedral Port Heads LS1/LS2/LS6 LS Based Engines Fits Chevrolet Corvette Chevy SSR Cadillac CTS Pontiac GTO Firebird Saab 9-7X

  • Fits LS Based Engines with Cathedral Port Heads LS1/LS2/LS6 heads 6.0L 5.6L 5.3L 4.8L)Chevrolet Small Block V8 GEN. III/IV(LS-Based)4.8L / 293 CI (LR4).
  • Fits 1997-2004 Chevrolet Corvette , 1998-2002 Pontiac Firebird Formula, Trans AM , 2001-2004 Corvette Z06 , 2004-2005 Cadillac CTS V-series, 2005-2007 Chevrolet Corvette ,2005-2006 Chevrolet SSR ,2006-2009 Chevrolet TrailBlazer SS , 2006-2007 Cadillac CTS V-Series,2005-2006 Pontiac GTO,2008-2009 Saab 9-7X Aero.
  • Package including:Intake Manifold, 102mm Throttle Body, Gaskets, Hardware, Fuel Rails, Fuel Crossover Line. Extra Spacer on throttle body has been included ..
  • Intake Manifold Height: 9.00 inches (approx. 3 inches higher than stock).
  • Fabrication by Tig Welded Aluminum .One year warranty available..
Check Stock

DNA Motoring OEM-ITM-021 Factory Style Engine Upper Intake Manifold Replacement

  • Intake Gaskets Molded into the Intake Manifold.
Check Stock

OE Style Engine Upper Intake Manifold Compatible with Ford Grand Marquis Muatang Lincoln Town Car 96-00

  • ▶️ Intake Gaskets Molded into the Intake Manifold.
  • ▶️ Direct Replacement for Factory Part.
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

Dorman 615-380 Engine Intake Manifold for Select Buick/Chevrolet Models OE FIX

  • Improved design - this intake manifold has been redesigned to correct a common PCV valve failure in the original equipment design to reduce excessive....
  • Complete kit - this manifold includes a new throttle body gasket, port gaskets, fuel injector O-rings, MAP sensor O-ring and screws for a complete....
  • Quality American construction - this intake manifold is engineered and manufactured in the United States of tough nylon polymer to resist cracking and....
  • Related repair - this manifold often leads to failure in the valve cover's PCV diaphragm.
  • a damaged valve cover will often need to be replaced at the....
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.
Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

DNA Motoring OEM-ITM-001 Upper Intake Manifold 615-175[For 99-04 Ford Mustang 4.6L V8 SOHC]

  • 100% brand new, never been used/ one piece design.
  • Reinforced aluminum coolant Crossover - eliminates failure due to corrosion or vibration.
  • Intake gaskets molded into the intake manifold.
Check Stock

A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 EFI Black

  • Intake Manifold with 102mm Throttle Body Fabricated 3mm Sheet Metal ..
  • Compatible with cathedral style LS1 LS2 LS6 4.8/5.3/5.7/6.0 heads.
  • The intake will not bend or flex with Boost Or Vacuum..
  • Includes Black Intake Manifold, Black DRIVE BY CABLE Throttle Body, Gaskets, Hardware, Black Fuel Rails, and Fuel Crossover Line.
Check Stock