Reviews Square Up Adapter

NDS 640 Square Grate with Low-Profile Adapter Fits 3 in. & 4 in. Drain Pipes & Fittings, 6 in, Black Plastic

  • Protect your drainage system by using a grate and low-profile adapter on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining moderate water flows from lawns, landscaped areas, patios, walkways, and under downspouts.
  • Fits 3 in. & 4 in. Sewer and Drain Pipes & Fittings, 3 in. & 4 in. Single-Wall Corrugated Pipes, 3 in. & 4 in. Triple-Wall Pipes. 44 GPM flow rate. 14.4 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place low-profile adapter on top of drain pipe or drain fitting, for a soil-tight fit.
  • place 6 in. drain grate on top of low-profile adapter. 6 in. Square Drain Grates (with Low-Profile Adapters) are available in a variety of colors and materials.
  • Grate top is 5-7/8 in. square with ¼ in. grate openings.
  • Low-profile adapter is 2-1/2 in. high, top opening is 6-3/16 in. square.
  • Comes with one 6 in. Square Grate and Low-Profile Adapter. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
  • NDS grates are a proven alternative to traditional concrete d....
Check Stock

SEDY 9-Pieces Impact Socket Adapter Set & Magnetic Bit Holder, 1/4\ Hex Shank with 1/4\

  • Each adapter made of heat-treated hardened chrome Vanadium(CR-V) steel, good abrasion resistance and high hardness, without breaking or rusting, deliver on long-lasting strength and durability. Includes a 60mm long bit extension bar with magnetized ends to securely hold 1/4-inch bits..
  • Spring loaded ball bearing on head, designed to fit securely while providing versatility and convenience no matter which tool you use. Compatible with common to heavy duty power tools, drivers, hand wrench, and screwdriver handle tools for flexible uses..
  • ▲4-Pieces 1/4" adapter: 25mm length, 30mm length, 50mm length, 65mm length --- can be converted to 6.35mm square head.
  • ▲2-Pieces 3/8" adapter: 50mm length, 65mm length --- can be converted to 9.53mm square head.
  • ▲2-Pieces 1/2" adapter: 50mm length, 73mm length --- can be converted to 12.7mm square head.
  • ▲1-Pieces 2.5 Inch magnetic bit extension piece with a 1/4-inch bit end..
  • All socket-drive adapter are 1/4” hex shank, hex adapter for square drive, the 1/4" hex shank air impact driver sockets fit all quick change chucks as well as standard drill chucks, fast connect, work on quick change drill chuck, standard drill chuck, handheld screwdriver, electric screwdriver, change your hand socket set into a driver soc....
Check Stock

Camco Black 39551 Complete Rv Sewer Kit

  • Complete sewer kit comes as assembled with everything required for a quick, reliable sewer hook up.
  • Non-restrictive for free flow and faster dumping.
  • Includes 10' HTS sewer hose, easy slip bayonet straight hose adapter and easy slip sewer elbow with 4-in-1 adapter.
  • Patented easy slip sewer hose fittings the most user-friendly fittings available.
  • 4-in-1 removable adapter allows storage in 4" square bumpers.
Check Stock

NDS Square Catch Basin Drain Downspout Grate, 12 in., Black Plastic

  • Protect your drainage system by deflecting leaves, needles, twigs, nuts, and seeds that travel from overhanging trees to your rooftop into your downspout, while capturing excess surface water into your catch basin or low-profile adapter. Use with the 12 in. square catch basin, riser, or low-profile adapter to drain excess stormwater from under downspouts.
  • Fits on 12 in. Square Catch Basin Drain, 12 in. Riser, and 12 in. Low-Profile Adapter. 167 GPM flow rate. 54.5 sq. in. of open surface area.
  • Receives downspouts from 2 in. to 6 in. round or square.
  • Lightweight and easy to install. Reduces downspout splashing to protect your property walls.
  • Unique design captures more water than traditional flat drain grates or drain covers. Angled grate allows debris to slide off the surface and away from the drain into tray.
  • Comes with one 12 in. Square Catch Basin Drain Downspout Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
Check Stock

Powerbuilt Serpentine Belt Tool Kit - 648451, Black

  • For removing or installing serpentine belts on vehicles with spring-loaded automatic belt tensioners.
  • Tool includes 24-in handle with 3/8-in square drive and 9-1/4-in adapter/extension with 1/2-in square drive.
  • Adapter fits on handle in 8 different positions.
  • Includes 24 inch handle with 3/8 inch square drive.
Check Stock

Solaire SOL-IR17BWR Anywhere Portable Infrared Warming Rack Gas Grill, Stainless Steel

  • Real Infrared ceramic and Stainless Steel burner with electronic push-button ignition.
  • 140 Square inches of grilling area that fits six 4-inch burgers on special v-grate that improves flavor and virtually eliminates flare-ups, plus 67 Square inches of warming rack area.
  • Use made by 100-plus Year old family business.
  • Includes carrying bag. A variety of accessories are available, including tank adapter, tripod, portable stand, natural gas conversion, low-pressure propane kit, mount adapter plate, and grid scraper.
  • Grill weighs 20 pounds and measures 20 wide by 13 deep by 12 inches high with hood down, and 20 wide by 13 deep by 21 inches high with hood up.
Check Stock

Impact Adapter Square Socket Bit Adapter Hex Impact Socket for Drills, Extension Socket Driver Bits Impact Socket Adapter for Automotive DIY (3/8 Inch Square Tip, Silver)

  • Sufficient supplies: the package comes with 10 square socket adapter bits, sufficient quantity can meet your daily needs and replacement.
  • Apply to: this hex socket adapter is especially designed to be applied as a plug-in handle when manually driving applications or with power tools.
  • The total length is about 6.5 cm/ 2.6 inch, easy to carry and store.
  • Material: featuring quenched high speed steel material, the socket bit adapter is sturdy, smooth, with high strength, and can be applied for a long time.
  • The size of the square tip is about 10 mm/ 3/8 inch, and the size of the hexagonal handle is about 6.3 mm/ 1/4 inch.
  • Before placing an order, please confirm the size to avoid an unpleasant shopping experience.
  • Double size conversion: 10 mm hex impact socket can convert the original hexagonal polygon size to square head size, so you can use it to install the socket.
  • It is a nice accessory for conversion, which improves work efficiency and brings many conveniences.
  • Bearing design: each square head of the socket adapter has a spring ball bearing part, which can effectively fix the socket and avoid sliding.
Check Stock

OIIKI 6 Pack 1/4 inch Square Socket Adapter Bit Set, Impact Driver Power Bits for Automotive DIY-1/4 Hex Shank

  • FUNCTION: This socket adapter is specially designed and used for manual drive applications or with power tools when used with plug-in shanks..
  • MATERIAL: This socket adapter is made of hardened and treated HSS, which has great strength and endurance for long time use..
  • SPECIAL DESIGN: This socket adapter has a very special design part of spring-loaded ball bearing on each square head, in order to effectively fix the socket and avoid sliding..
  • DOUBLE SIZE CONVERSION: The original hexagonal polygon size is converted to a square head size, which can be used to mount the sleeve as a good accessory for conversion..
Check Stock

OIIKI 6 Pack 3/8 inch(10mm) Square Socket Adapter Bit Set, Impact Driver Power Bits for Automotive DIY-1/4 Hex Shank

  • FUNCTION: This socket adapter is specially designed and used for manual drive applications or with power tools when used with plug-in shanks..
  • MATERIAL: This socket adapter is made of hardened and treated HSS, which has great strength and endurance for long time use..
  • SPECIAL DESIGN: This socket adapter has a very special design part of spring-loaded ball bearing on each square head, in order to effectively fix the socket and avoid sliding..
  • DOUBLE SIZE CONVERSION: The original hexagonal polygon size is converted to a square head size, which can be used to mount the sleeve as a good accessory for conversion..
Check Stock

Godox ML-CD15 Diffusion Dome Kit with 3 adapters, Flash Light Diffuser, Compatible for Godox V1C V1S V1N ML30 ML60 ML60Bi AD200 AD200PRO & Other Godox Mount Lights

  • Pleasant Softness: Wrap your light into the tent or dome and you will get pleasant softness for beauty look. Load Free Soft material as a new choice makes them lightweight and flexible in shape, easily to be squeezed as small as possible for storage or transportation..
  • More Possibilities than You Expect Collapsible design opens several ways to shape light. Use diffusion dome in fully extension for 360-degree lighting, or collapses theback to diffuse at 180 degrees, and when collapsing the front, you can change the light quality for more dimensionality..
  • Round head adapter: Round head adapter is applicable to all Godox round head flash, such as V1 series flashes, AD100PRO Pocket Flash, and AD200PRO round head flash..
  • Rectangle to round head adapter: Rectangle to round head adapter is applicable to most square head flash, such as Godox V860II,V860II,V850II, TT685II, TT685, TT600, TT560II, TT520II, TT660S, AD200 square head flash and square head flashes of other brands..
  • Godox mount adapter: Godox mount adapter is applicable to all Godox video lights, such as ML30, ML30Bi, ML60, ML60Bi, AD300PRO, AD400PRO..
Check Stock

NDS 1212 Square Catch Basin Drain Grate, 12 in, Green

  • Protect your drainage system by blocking leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Use with the 12 in. catch basin, riser, or low-profile adapter to drain heavy flows of excess stormwater from lawns, landscaped areas, under downspouts, patios, and walkways.
  • Fits 12 in. Catch Basin storm drain, 12 in. Riser, and 12 in Low-Profile Adapter. 162 GPM flow rate. 53.1 sq. in. of open surface area. Rated for NDS Class B loads (up to 175 psi) when properly installed—recommended for medium-duty pneumatic tire traffic, autos, and light trucks at speeds less than 20 mph.
  • cover fits on catch basins, risers, and low-profile adapters and can be secured with screws. 12 in. Catch Basin Drain Grates are available in a variety of colors, materials, and styles.
  • Made to fit 12 in. square catch basins, risers, and low-profile adapters.
  • Comes with one 12 in. Square Catch Basin Drain Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
Check Stock

NDS 1215 Square Catch Basin Drain Grate, 12 in, Galvanized Steel

  • Rust- and corrosion-resistant galvanized steel grate protects your drainage system by blocking leaves and debris before they can enter and clog your pipeline. Use with the 12 in. catch basin, riser, or low-profile adapter to drain heavy flows of excess stormwater from driveways, parking lots, and landscaped areas.
  • Fits 12 in. Catch Basin storm drain, 12 in. Riser, and 12 in. Low-Profile Adapter. 348 GPM flow rate. 113.8 sq. in. of open surface area. Rated for NDS Class C (H-20) loads (up to 325 psi) when properly installed—recommended for heavy-duty pneumatic tire forklifts and tractor-trailers at speeds less than 20 mph.
  • fits on 12 in. catch basins, risers, and low-profile adapters, and can be secured with screws. 12 in. Catch Basin Drain Grates are available in a variety of colors, materials, and styles.
  • Made to fit 12 in. square catch basins, risers, and low-profile adapters.
  • Comes with one 12 in. Square Catch Basin Drain Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
Check Stock

DEF 2' to 1-1/4' Hitch Receiver Adapter for Standard Hitch Adapter 2'' to 1 1/4'' Billet Aluminum (2' to 1-1/4')

  • Fitment:Insert sleeve mount adapter reduces standard 2" square receiver hitch to accept 1-1/4" to insert..
  • Material:CNC Billet Aluminum,surface grinding,powder coated black,resistance to rust and corrosion..
  • Feature:For standard 2'' square receivers,fits snugly inside the receiver..
  • Higher friction:Different from normal models,special shape design gives the adapter higher friction and prevent wobbling..
  • Package Includes:1 x Insert sleeve mount adapter..
Check Stock