Reviews Square Steel Pipe

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

  • ...als who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
  • NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
  • Uncoated Tools for Versatile Use: Uncoated tools feature just the base substrate without any additional treatment or coatings. Our uncoated Pipe Taps Set are suitable for a wide range of applications, and the straight flute design allows chips to collect in the flutes as they cut..
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • ...hreads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
  • The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available..
  • Product Packaging Upgrade: The set comes with a convenient red storage box to keep the taps organized and easily accessible. The box also helps protect the taps from damage during transportation and storage. These thread forming taps are perfect for plumbers, mechanics, or anyone who wor....
Check Stock

Corona Hercules Post Hole Digger PD60000

  • Buckeye pattern features strong steel pipe handles welded to the square steel shanks and yoke.
  • Super tough square-cut steel blades are ideal for digging in heavy, rocky soils.
  • Returns will not be honored on this closeout item.
Check Stock

Seymour DG-16 6-1/2-Inch Post Hole Digger

  • Buckeye pattern features strong steel pipe handles welded to the square steel shanks and yoke.
  • Super tough square-cut steel blades are ideal for digging in heavy, rocky soils.
  • Returns will not be honored on this closeout item.
Check Stock

Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\

  • Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • NPT Pipe taps, sizes 1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14 NPT carbon steel Pipe taps in plastic pouch case.
Check Stock

Toledo Pipe H8S 6\-8\ Heavy Duty Hinged Pipe Cutter fits RIDGID & REED Wheels with Extra Cutter Wheels

  • Four cutting wheels make cutting steel, stainless steel, cast and ductile iron an easy job..
  • With only 4" of clearance required around pipe makes using this cutter anywhere possible..
  • Guide fingers ensure perfect wheel alignment for square cuts..
  • A closed 360° frame forces all energy into cutting the pipe for maximum efficiency..
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

uxcell 5 Piece Square Round Pipe Plastic Chicken Drinker System S Hook Clamp

  • fit for : 20mm x 20mm square pipe, 24mm diamond pipe.
  • Package content : 5 x square pipe s hook clamp.
Check Stock

4 Sets 304 Stainless Steel Square U-Bolt Boat Trailer U-Bolts with Washers and Nuts L Heavy Duty U Bolts for Sailboat Trailer Automobiles Trailer Industrial Parts 1/2 D x 3 1/16 W x 4 5/16 Inch

  • Package includes: stainless steel u-bolt set include 4 pieces u-bolts, 8 pieces stainless steel flat washers, 8 pieces stainless steel nylon lock nuts, 8 pieces lock washers, all accessories are made of 304 stainless steel.
  • U-bolt size: 1/2 x 3-1/16 x 4-5/16 inch (D x W x L), thread length: 2-1/2 inches, suitable for 3 x 3 inch square beams and shafts.
  • Stainless steel material: u bolts for boat trailer are made of 304 stainless steel, strong and long-lasting.
  • These 304 stainless bolts prevent rust corrosion, acid corrosion and wear.
  • It's still perform well in rainy and humid seaside environment.
  • How to use: firstly choose the corresponding square U shaped bolt according to the size of the pipe, then drill holes in the connection, and finally lock nut and flat washer.
  • Use a hand wrench or socket ratchet when installing nuts.
  • Do not use an impact or a high speed socket driver.
  • Wide application: square u-bolt is applied to fix or connect the locked parts to rectangular wood and metal objects, such as cars, sailboat trailers, pipe, tube, plumbing and other industrial applications.
Check Stock

HORUSDY 5-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

Toledo Pipe H6S 4\-6\ Heavy Duty Hinged Pipe Cutter fits RIDGID & REED Wheels

  • Four cutting wheels make cutting steel, stainless steel, cast and ductile iron an easy job..
  • With only 4" of clearance required around pipe makes using this cutter anywhere possible..
  • Guide fingers ensure perfect wheel alignment for square cuts..
  • A closed 360° frame forces all energy into cutting the pipe for maximum efficiency..
  • All replacement wheels and parts available in stock..
Check Stock

Ruiwaer 1/2 inch NPT Thread Forming Taps Round Shank with Square End

  • The products are forged from high-quality bearing steel, with good surface treatment, high strength and good toughness..
  • Size of square end of product: 0.55 x 0.55 inch..
  • 1/2'' NPT pipe joint is mainly used for cleaning and thread chasing..
  • The product is mainly aimed at the repair of threads such as rust, fracture and slip of water pipe joints..
  • The product includes: 1 cylindrical pipe thread tap. Please pay attention to the finished size when purchasing..
Check Stock