Reviews Square Nut

Wiha 32097 | 7 Piece Insulated SoftFinish Screwdriver Set

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

XtremepowerUS Multiplier Torque Wrench Labor Saving Lug Nut Wrench Cr-v Socket (Torque Wrench W/ 4 Socket) + Case

  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1-inch drive sockets.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut, extension bar helps to r....
Check Stock

Crescent CP4PCSET 4 Pc. Phillips® Acetate Screwdriver Set

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Wera Kraftform Plus 354 Hex-Plus 3mm Hexagon Professional Screwdriver, 3\ Shaft Length,5023110001

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

5 Pieces Detachable Magnetizer Screw 1/4\ 6.35mm Metal Hex Screwdriver and Power Bits (Yellow)

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Short Stubby Screwdriver with Reversible and Magnetic Bit - Phillips and Slotted-Flat - Gato Tools, Blue

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

ABN Torque Multiplier Wrench – Torque Multiplier 1 Inch Drive Lug Nut Wrench Torque Amplifier Lug Nut Remover

  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut.
  • 3 inch (75mm) extension bar helps to remove nuts quickly after being loosened.
  • Use the square socket for square duel lug studs.
  • PERFECT SIZE FOR YOUR NEEDS: Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes 1-5/8 inch (41mm), 1-1/2 inch (38mm), and 1-5/16 inch (33mm).
  • This labor saving wrench set fits your other 1 inch drive sockets.
  • CONVENIENT STORAGE: 15.25 by 8.5 by 4 inch (28.7 by 21.6 by 10.2cm) heavy-duty plastic blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Torque amplifier wrench case features locking latches for added security and molded handle for comfortable travel so you can change your tires anytime, anywhere.
Check Stock

GreatNeck SD11RC 11 in 1 Screwdriver and Nut Driver Set Multi-Bit Cushion Grip Multi Tool Screwdriver Kit HVAC tools Electrician Tools

  • 11-IN-1 SCREW DRIVER SET: features the star tips, Phillips screwdriver bits, flat head screwdriver bits, and square-tip bits used most often by....
  • THOUGHTFULLY DESIGNED: All in one screwdriver features interchangeable shafts for quick bit storage.
  • Superior socket design for secure bit fit.
  • INCLUDES THESE BITS: Slotted or flathead screwdrivers bits (3/16", 1/4"), Phillips head screwdriver bits (#1, #2), Square drive bits (#1, #2), and....
  • DOUBLES AS A NUT DRIVER: Multi screwdriver’s shaft converts to nut driver sizes: 1/4", 5/16" and 3/8".
  • MULTIPURPOSE TOOL: 11 Nut and Screw drivers in one tool. If you're looking for a multibit screwdriver with the most common torx, square bit, slotted,....
Check Stock

Dragon Fit Joggers for Women with Pockets,High Waist Workout Yoga Tapered Sweatpants Women's Lounge Pants (Small, Joggers78-Black)

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

XtremepowerUS Torque Wrench Labor Saving Lug Nut Wrench Torque Multiplier w/ Cr-v Socket (Torque Wrench W/ 8pc Socket Set)

  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut, extension bar helps to remove nuts quickly after being loosened.
  • Use the square socket for square duel lug studs.
  • Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 4800 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point sockets, (1) 4-point square socket, and (1) extension bar.
  • 6-point sockets include sizes (38mm), (33mm), (32mm), (30mm), (27mm) and (24mm).
  • This labor saving wrench set fits your other 1-inch drive sockets.
  • Convenient Storage Case - Heavy-duty plastic blow-molded carrying case provides easy transportation, safe storage, and quick organization. Torque amp....
Check Stock

5PCS Precision Screwdriver Set, Stainless Steel Material, Small Flat-blade Screwdriver Kit, Mini Phillips Screwdriver for Repair Watch, Toys, Glasses and Electronics

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Triwing Screwdriver for Nintendo Switch Joycon, 1.5 Y Tripoint and Y00 Screwdriver Repair/Replacement Tools for Switch/Switch Lite JoyCon Joy-Con Controller

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

YUNSHUO M3 Stainless Steel Square Thin Nuts DIN 562 100pcs Thickness 1.8mm

  • M3 Thin Square Nut: Thickness: 0.07 inch/1.8mm.
  • Thread: M3, L x W: 0.21x0.21 inch, Size: 5.4x5.4x1.8mm.
  • Well Made Nut with Good Plating, Fit for Prusa I3 Printer.
  • What You Get: 100Pcs of M3 Square Nuts with thickness 1.8mm.
Check Stock