Reviews Square Mounting Flange

Regal Beloit B2855 Century 2 Horsepower 230V 3450 RPM Stainless Steel Continuous Single Phase Pool Pump Motor with Square Flange for Inground and Above Ground Pools

  • SQUARE-FLANGE MOUNTING: Single-phase pump motor is a part of the Century pool and spa pump motors with Square Flange series.
  • CONTINUOUS OPERATION: Features a permanent split capacitor and a switchless design.
  • SEALED BALL BEARING: Stainless steel threaded shaft with sealed ball bearing with a 50-degree Celsius ambient temperature.
  • THERMAL PROTECTION: Motor features automatic thermal protection and non-reversible counterclockwise pump end.
  • FEATURES: Includes a 56Y frame-square flange and open drip-proof ball bearings.
Check Stock

Mssoomm 25mm HGW25 CNC Square Linear Guide Rail Kit 2Pcs HGW25-116.14 inch / 2950mm +4Pcs HGW25 - CA Flange Type Bearing Carriage Slider Block Linear Motion Rail Rod Set for 3D Printer and DIY Project

  • ... long-term wear resistance, super stability, Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • Adopt Goethe-style four-point contact design, which can withstand loads evenly in all directions ( up down and left right) and self-aligning function, can absorb the assembly error of the mounting surface， with high precision under high load.
  • The flange square bearing slider block use high-quality bearing steel, thickened material is not easy to damage and with higher load ability, sturdy and durable.
  • More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life.
  • Directly operated by the factory, with complete series (HGH-CA, HGW-CA, HGW-HA, HGH-HA, EGH-CA, EGW-CA) and customization for lengths (including the total length and the length between the two square rail mounting holes), and if the total length you need exceeds 2950mm, you can use splicing technology to make it. The image 7 shows the block stops as some accessory, any technical support and needs, please contact us without hesitation.
Check Stock

Titan Building Products - 4x4 Post Skirt - SKBL44 - Black - 3.5\ Interior Opening

  • Aluminum Alloy guardrail flange post base fits 2 x 2 inch(50x50mm) Square Post, base height 33mm(1 ¼ in)..
  • Material: Non-standard aluminium alloy 102, polishing finish, Thickness: 2.2 mm. Net Weight: 73g(2.5 oz)..
  • 2 slots for surface mounting, size 10x7mm. (note: screws are not included).
  • Hardware advantage: low cost, Light-weight, non-rust, durable, easy to install, can be reused and easy to maintain..
  • Square Metal post connector to floor for deck cable railing, fence, handrail railing, mailbox post holders..
Check Stock

Exhaust Shutter, Single Panel 30 In

  • Shutter Item: Backdraft Damper / Wall Shutter, Front Flange.
Check Stock

Edelbrock 5001 Torker II Intake Manifold

  • Overall height of the manifold is 3.09 front and 4.06 rear.
  • Single plane, open plenum design with no provision for divorced or hot air choke.
Check Stock

JEGS 513003 Intake Manifold for 1955-1986 Small Block Chevy 265-283-302-327-350-400

  • 4-BBL Square Bore 4150/4160 Mounting Flange....
Check Stock

Detroit Axle - Front Wheel Hub & Bearings Replacement for Chevy GMC Silverado Sierra 2500 3500 HD Suburban Yukon XL 2500

  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front Wheel Bearing & Hub Assembly.
  • Hub Specification: Position: Front Left or Right| Lugs: 8 Bolt| Mounting Bolt Qty: 4| ABS Type: Sensor Wire| Flange Type: 4-Bolt Square.
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
Check Stock

Garbage Disposal Flange, 3 Bolt Mount Stainless Steel Kitchen Sink Flange Kit with Splash Guard for 3 1/2 Inch Standard Sink Drain Hole, Sink Food Waste Disposer Installation kit

  • Disposer Sink Flange Kit - Compatible with ISE disposals, this brushed stainless steel sink flange features the Twist-On, Twist-Off quick lock design that helps ensure fast and easy replacement of existing disposer mounts..
  • Full Flange Kit with Splash Guard - It contains all the accessories you need, Sink flange, Splash guard, Mounting hardware (2-layer rubber sink gasket, support ring, mounting ring, cushion mount). No worry about finding other matching parts any more!.
  • Premium Material - 4 1/2" (Diam) x 1 1/2" (Depth), capacity up to 110lbs. High density 304 stainless steel flange with nitrile rubber splash guard, sturdy, durable, rust-proof, waterproof, easy to clean and reduce the noise made by your garbage disposer..
  • For Stainless Steel Sinks - This brushed stainless steel 3-Bolt Mount sink flange complements most stainless steel sinks, the brushed surface design is more durable than polishing, it can stay with you longer..
  • A Innovator for the Kitchen - We strive to build on better living. We’re innovators, passionate about life and the things that make it better. When you partner with CLEESINK, you partner with the future..
Check Stock

Kohler 76332-CP Rainhead, Polished Chrome

  • Diverter switches water between rainhead, handshower or both at one time.
  • For use with KOHLER showerheads and handshowers (sold separately).
  • K-76334 Traditional flange and K-76335 Square flange also available (sold separately).
  • KOHLER finishes resist corrosion and tarnishing.
Check Stock

Cool Attic CX1500UPS Power Gable Ventilator Fan

  • VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat.
  • GABLE MOUNT FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical. It mounts easily in gable behind louvers.
  • ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction.
  • EASY INSTALLATION: It cools attic up to 1,850 square feet and 3.4-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs.
  • HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof.
Check Stock

Erva 5 Piece Feeder Pole Set with Twist-in Ground Socket - Made in The USA

  • Steady those big houses and heavy feeders.
  • Mounting Flange measures 3-3/4in x 5-5/8".
  • Equipped with a twist-in ground-socket for super stability in any soil..
  • Total height of 80 inches and a mounting flange for bottom mounting houses or feeders..
  • Pole is 1 inch in diameter, twister socket has a 1-1/32 inner diameter to accommodate a 1 inch pole..
Check Stock

GW YYN5682-L7 2 HP, 3450RPM, 1.3 Service Factor, 56Y Frame, 208-230V, Square Flange Pool Pump Motor

  • High quality, Super efficient Pool Motor.
  • One year warranty by manufacturer GW Electric USA Inc. (909) 366-2018.
  • Nema Standard. A direct replacement for any 2HP 56frame square flange pool motor.
Check Stock

NIREU 6 Inch Square Shower Floor Drain with Removable Cover Grid Grate, SUS 304 Stainless Steel, Watermark&CUPC Certified, Chrome Finished

  • 6 inch length, 6 inch width square drain fits perfectly most square tiles. 2 inch bottom outlet, 60L/min high flow capability, fits US NO HUB Drain Base System, solving bathroom drainage problem effectively..
  • The square drain made of US ASTM standard 304 Stainless Steel, base flange made of ABS construction, surface Chrome finished, protect against corrosion, scratches and rust for long-lasting durability. WATERMARK&cUPC certified..
  • The removable cover grid grate with 64 square holes design, it can prevent hair and larger objects from falling into the sewer and enhance water flowing. The embedded design offer a invisible and seamless look on your floor..
  • Easy to install with clear instructions. Base flange connects to drain pipe, fit standard U.S. plumbing connection. It can be used in bathroom, kitchen, pool, lavaroty, garage, basement, toilet etc..
  • The square drain kit includes removable hair strainer/trap and lifting hook/key, you can easily lift the cover for cleaning..
Check Stock