Reviews Square Metal

AXLIZER Wand Tilter 2pcs Heavy Duty Low Profile Wand Tilter Rod Tilter for 2 inch Horizontal Blinds, Square Shaped Gear/Hook Connection

  • Made of high quality plastic and metal materials, with metal hook, it is durable, not easy to break or deform, can be used for a long time, suitable for internal installation..
  • You just need to prepare the tape measure and pliers. The installation process is very simple and easy to replace: the thin wand tilter can replace the old one, so it can easily repair the blinds..
  • It has a square gear hole in the center (which means the metal bar in the shutter bar must be square to fit inside the gear). Square Gear Inner Side Length:4.5mm/0.17 inch..
  • Specification: blind rod control tilter is about 39mm / 1.5 inch in width and 75mm / 2.9 inch in height, which is suitable for most horizontal blinds. In order to install in the gear, please confirm that the louver metal bar inside the louver head rail must be square..
  • Packing list: the package includes two low stick tilters, which can meet your daily maintenance needs. Suitable for 2-inch horizontal louver, square gear, hook connection..
Check Stock

Swan Products Element Sprinkler Soaker Hose 25' - New.

  • Series connection with metal easy swivel.
  • The square patterns gets all the corners.
  • Aluminum head and 1 pound metal series connection base.
  • Great for Small yards spot watering and re-seeding.
Check Stock

Finger Chopsticks,Gamer Chopsticks,Snack Chopsticks Finger,Finger Tongs for Eating,Chip Chopsticks,Chip Grabber Finger,Snack Tool,Snack Clips for Gamers,Chopsticks for Chips

  • ...ks. No worry about mixing use. It's more healthy and sanitary. The metal chopsticks with engraved surfaces are easier to use compared with the chopsticks with smooth surfaces. The etching on the metal chopsticks reduces the slippery feeling..
  • ✿ 【Non-slip Design】: Our metal chopsticks are with anti-slip tip and square body. The reinforced laser etching on the stainless steel chopsticks tip makes the metal chopsticks easier to grab food and better anti-slip. The metal chopsticks with the square body are easier to use and more comfortable when holding on hand. The square chopsticks won't roll on the hand, neither roll when putting the square metal chopsticks on the table like the round metal reusable chopsticks and spiral chopsticks do..
  • ✿ 【Healthy and Sanitary】: The 304 stainless steel chopsticks are with mirror shiny surface. They won't hide the dirt. The reason why the wooden/bamboo chopsticks get moldy easily is due to their loose construction. There are thousands of tiny holes that gain food residue and liquid during use. It is very hard to get rid of them during the normal cleaning process. Metal chopsticks with solid construction are free from that trouble. That is why the metal reusable chopsticks are healthier..
Check Stock

Stonebriar Square 15\ Rustic Farmhouse Worn Wood Arabic Number Battery Operated Wall Clock

  • FARMHOUSE THEME: Enhance your farmhouse inspired home with classic style and a touch of cozy appeal.
  • MADE OF IRON: This square wall clock for living room is made from a solid iron.
  • GRAY METAL FINISH: This square wall clock features a galvanized metal face detailed with grainy dark gray numbers and frame.
  • FEATURES SQUARE WALL CLOCK: The gray washed wood frame of this square wall cock matches the cool gray tones throughout the galvanized iron clock face.
  • LARGE SIZE: This item measures 25.0L x 2.05W x 25.0H inches, and weighs 5.56 lbs.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Ludwig Precision Heavy-Duty Aluminum T-Square for Art, Framing & Drafting, 24-inch

  • 24” LENGTH – Aluminum metal T-Square is a straight edge with durable plastic head that is a tool for measuring, cutting, picture framing and drafting.
  • HEAVY-DUTY CONSTRUCTION – Drafting T-Square features a 2” x 2.3mm extra-thick extruded aluminum blade, durable plastic head is calibrated to 5” on each side of the blade.
  • EXTRUDED ALUMINUM CONSTRUCTION – Drafting T-Square blade is made from high-quality extruded aluminum for accurate measuring, cutting, drafting and picture framing.
  • INCH AND CENTIMETER CALIBRATIONS – Aluminum metal T-Square blade is calibrated in both inches and centimeters for flexibility in drafting, measuring, cutting and picture framing.
  • QUALITY IMPRINTING – Drafting T-Square features large numbers printed using precise imprinting techniques that will not rub off with extended use and time.
Check Stock

Metal Threaded Star Type Insert for 1 OD Round or Square Tubing - Threaded Star Tube Insert - Round or Square Tubing Insert 1/4-20 Threads - Threaded Tubing Inserts Threaded Tube Inserts 16

  • 16 Pack Threaded Star Type Round or Square Tubing Insert 1/4-20 Threads.
  • Round or Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Metal star type inserts are designed to insert inside steel tubular legs.
  • Round or Square Tubing Threaded Insert - Our metal tube connectors are designed to grip the inside of tubing and prevents the insert from slipping out....
  • Threaded Inserts for Round or Square Tube - These versatile products are commonly used in ductwork supports, rack units, RV ladders, and cross member....
Check Stock

Steve Silver Rowyn Faux White Marble 3-Pack Metal Occasional Set

  • Constructed of 16 mm square metal tube with 16 mm scratch-resistant faux marble top over engineered hardwood.
  • off white faux marble top with champagne colored metal base.
  • 16mm square tubing with .5 inch round tube.
Check Stock

Silverstar 16 PCS Square Silicone Chair Leg Protectors, ( Black 2 Inch X-L).

  • [Square Chair Leg Cover Felt Bottom Easier Slide] – Square Chair leg cap and felt are through new technology compressed as one body, this Black Square Chair Leg Feet Cover wooden floor protectors are durable and the felt will never detach. These chair leg caps protectors can protect furniture legs and wooden floor from damage..
  • [Stretchable & Fit Square Chair Leg Well] - The new chair furniture leg Feet covers with bottom flexible and stretchable to best fit square shaped furniture legs just like the silicone furniture caps. Recommended Size:Square length from 1.77" to 2.01" (45-51mm).circumference of 7.09" to 8.03" (180-204mm)..
  • [Chair leg Cups are Easy to Install & Stay Tight] - 16 Pieces Silicon Furniture Feet Covers Felt Bottom is made from soft gel and Felt, durable and lasting longer, fits various size Square furniture feet: Kitchen chairs, tables, dining room chair, sofa, couch, bar stool, Beds, Dressers, patio chairs, metal bistro chairs, desk chairs etc. Simply stretch and put them on, no nails, gels or tools needed to install so it won’t damage furniture..
  • [Anti-aging] -square chair leg cover floor protectors reduces noise, protect wood floors and the felt make it much easier to slide when chairs move. All materials are Eco friendly and to....
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Silverstar 16pcs Square Silicone Chair Leg Floor Protectors.(1-1/2" Black Large).

  • [Square Chair Leg Cover Felt Bottom Easier Slide] – Square Chair leg cap and felt are through new technology compressed as one body, this Black Square Chair Leg Feet Cover wooden floor protectors are durable and the felt will never detach. These chair leg caps protectors can protect furniture legs and wooden floor from damage..
  • [Stretchable & Fit Square Chair Leg Well] - The new chair furniture leg Feet covers with bottom flexible and stretchable to best fit square shaped furniture legs just like the silicone furniture caps. Recommended Size:Square length from 1.26" to 1.54" (32-39mm).circumference of 5.04" to 6.14" (128-156mm)..
  • [Chair leg Cups are Easy to Install & Stay Tight] - 16 Pieces Silicon Furniture Feet Covers Felt Bottom is made from soft gel and Felt, durable and lasting longer, fits various size Square furniture feet: Kitchen chairs, tables, dining room chair, sofa, couch, bar stool, Beds, Dressers, patio chairs, metal bistro chairs, desk chairs etc. Simply stretch and put them on, no nails, gels or tools needed to install so it won’t damage furniture..
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts

  • 8 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock