Reviews Square Long Lock

uxcell Square Hole Drill Bit, 1/2" High-Carbon Steel Hollow Chisel Mortise Power Tool for Woodworking

  • 【SIZE】1/2" (12.7mm) square chisel width, 75mm cutting depth, 205mm total length..
  • 【TIP AND EDGE】The best-designed drilling point tip and 4 cutting corners enable fast drilling with small opening resistance, and penetrating into working pieces of wood in precise opening size very smoothly and fast..
  • 【MATERIAL】Made of High-carbon steel, through heat processing, with high hardness (48-50 HRC) drill bits, and sharp-edged square chisel, durable and lasts long..
  • 【ADVANTAGE】With long drill core and square chisel, easy to lock the hole on the wood, can reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs..
  • 【OPERATION】Used with mortise and tenon machine with double effect, and electric drill, hammer and other tools is required for punching square hole in wood..
Check Stock

Designing Video and Multimedia for Open and Flexible Learning (Open and Flexible Learning Series)

  • ...ue and vintage door hardware, the kit is an economical replacement for indoor mortise locks..
  • EASY INSTALLATION – Installation is quick and easy, and all mounting screws are included. The mortise lock easily slides into the existing door pocket for an fix for a broken lock. It has a 2-3/8” backset with a 9/32” square spindle drive that accepts a maximum spindle size of 1/4”..
  • STEEL WITH BRASS-PLATED FINISH – The E 2294 lock is constructed from case-hardened steel and features a faceplate with a bright, brass-plated finish. The kit includes a latch and deadbolt strike with fasteners (door knobs, square spindle, spare keys and trim plates sold separately) and two skeleton-style keys..
  • LEFT OR RIGHT-HANDED INTERIOR DOORS – The mortise caselock ships handed (to close in a certain direction) but the latch can easily be reversed for opposite swinging doors..
  • INSTALLATION TIP – Although the square drive on the latch has a 9/32” opening, it will only accommodate 1/4” square spindles..
  • For all dimensional information please refer to the line art and compare to your needs before purchasing.
  • The keys on these locks also known as skeleton keys do not have a stopping point like the traditional locks it does take time to learn hoe to use a skeleton key....
Check Stock

BIGLUFU Motorcycle Chain Locks 3.3ft/100cm Heavy Duty Long Chain Cut Proof 0.39 inch/10mm Thick Colorful Square Chains with 0.63inch/16mm U Lock Ideal for Motorbike,Generator Gates

  • ★★ HEFTY & STRONG CUT RESISTANT: Our bike lock is made of unbreakable 3T manganese steel,10mm diameter, 100cm/3.3ft long square-linked chain,....
  • ★★ SCRATCH-PROOF COVER & FRIENDLY SIZE: The chain lock is wrapped by a water-resistant nylon sleeve, which is scratch-proof and wear-resistant,....
  • ★★STOUT U LOCK & 4 ERGONOMIC KEYS: Our chain lock comes with 1 sturdy U lock made of 16mm hard zinc alloy shackle and thick PVC coating, strong....
  • ★★WIDELY APPLICATION: This motorcycle lock is long enough to lock 2 to 3 motorcycles together, also ideal for locking lawnmowers, sports....
  • ★★WARRANTY & CUSTOMER SERVICE: 100 days warranty applies to the bike lock chain, 90-day money back policy, 24-hour online customer service. If you....
Check Stock

Cricket 10 Piece Mini Cute Diary Padlock Tiny Small Luggage Locks with Keys for Jewelry Boxes Decor Backpack Travel, 10PC Value Set, $10 Value

  • SET OF 10 - This value set comes with 10 mini padlocks and 20 matching keys sets. Small size, easy to use and carry. These mini locks are approx 10 33*18mm/13*0.7in size..
  • MATERIAL - These mini locks are made of high-quality metal material, which is wear-resistant, high-temperature resistant, and not easy to deformation and long service life..
  • ADVANTAGE - The locks are of a high-quality design. The square padlock is easy to use, very strong, easy to open and close, to ensure the safety of your goods..
  • FEATURES - Square small lock can help you lock your personal belongings, prevent privacy leakage, and ensure the security of your private space..
  • APPLICATION - Square padlocks are suitable for shear cases, jewelry boxes, toy boxes, storage boxes, drawers, closets, handbags, small suitcases, diaries, small craft diaries, small boxes, and much more..
Check Stock

IRON COMPANY Body Solid Smith Machine Powerline

  • The ladder-type mainframe features full length, heavy-duty 12 gauge square pillars with 14 crossmember Lock-Out Points providing a solid foundation for the Safety Spotter Catches during the heaviest routines..
  • Heavy-duty Adjustable Safeties equip you for the unexpected. Jumbo pop pins are quickly and easily adjusted to help you come to a safer, predetermined stop with greater straight-line stability..
  • Extra long twin carriages have long-life patented Super-Glide nylon bushings for frictionless movement and performance over 2"square, high polished chrome guide bars..
  • Assembled Dimensions: 80"H x 45"L x 76"W..
Check Stock

3M SJ4575/BLK110 Scotch SJ4575 Dual Lock Low Profile Reclosable Fastener: 1" x 10 ft, Black

  • ...int of purchase), trade show exhibition and electronics, Dual Lock low profile reclosable fasteners attach ceiling tiles, carpet, seat cushions, trade show graphics, access panels, wall panels, and small electronic devices. They are also great for attaching E-ZPass tags to car windshields. 3M typically recommends 4 square inches of fastener per pound of static load for their low profile dual lock products..
  • unlike products where there are a separate hook and a loop side.
  • so rolls are typically cut in half and then mated or connected so a 10-foot roll would be used as two 5-foot strips. Low profile dual lock has about 700 stems per square inch, but the stems are much shorter than standard dual lock which has either 170, 250 or 400 stems per square inch. let you make a much thinner joint – ideal for smaller lightweight items..
  • Pins: 705 per square inch. Carrier/Backing: polypropylene. Adhesive: acrylic (300 LSE). Release Liner: 86# polycoated Kraft. Thickness: 65 mils (carrier, adhesive) 6.5 mils (liner). Adhesion: 96 ounces per inch (to stainless steel test panel). Tensile Strength: 42 pounds per inch (longitudinal). Service/Operating Temperature: -20F to 158F. Engaged Thickness: 91 mils..
Check Stock

3M SJ4570/CLR1333 Scotch SJ4570 Dual Lock Low Profile Reclosable Fastener: 1" x 10 ft, Clear

  • ...nt of purchase), trade show exhibition and electronics, Dual Lock low profile reclosable fasteners attach ceiling tiles, carpet, seat cushions, trade show graphics, access panels, wall panels, and small electronic devices..
  • They are also great for attaching E-ZPass tags to car windshields. 3M typically recommends 4 square inches of fastener per pound of static load for their low profile dual lock products. The 10-foot sizes are cut from longer source rolls (only the 5/8 inch x 10-foot size of SJ4570 which is specifically labeled as *retail-packaged comes in a package suitable for resale)..
  • unlike products where there are a separate hook and a loop side.
  • so rolls are typically cut in half and then mated or connected so a 10-foot roll would be used as two 5-foot strips. Low profile dual lock has about 700 stems per square inch, but the stems are much shorter than standard dual lock which has either 170, 250 or 400 stems per square inch. They let you make a much thinner joint but it doesn’t have the holding power of standard dual lock..
  • Pins: 705 per square inch. Carrier/Backing: polypropylene. Adhesive: acrylic (300 LSE). Release Liner: 86# polycoated Kraft paper. Thickness: 65 mils (carrier, adhesive) 6.....
Check Stock

Prime-Line Products E 2294 Mortise Keyed Brass Knob – Perfect for Replacing Broken Antique Lock Sets and More Fits 1-3/8 inch-1-3/4 inch Interior Doors single pack

  • ...ote: Measure your door's backset, cross bore and thickness to ensure you find the right fit..
  • EASY INSTALLATION – Installation is quick and easy, and all mounting screws are included. The mortise lock easily slides into the existing door pocket for an fix for a broken lock. It has a 2-3/8” backset with a 9/32” square spindle drive that accepts a maximum spindle size of 1/4”..
  • STEEL WITH BRASS-PLATED FINISH – The E 2294 lock is constructed from case-hardened steel and features a faceplate with a bright, brass-plated finish. The kit includes a latch and deadbolt strike with fasteners (door knobs, square spindle, spare keys and trim plates sold separately) and two skeleton-style keys..
  • LEFT OR RIGHT-HANDED INTERIOR DOORS – The mortise caselock ships handed (to close in a certain direction) but the latch can easily be reversed for opposite swinging doors..
  • INSTALLATION TIP – Although the square drive on the latch has a 9/32” opening, it will only accommodate 1/4” square spindles..
Check Stock

Fromm Intuition Square Thermal Brush, 1.75 Inch

  • CERAMIC COATED: The Square Styler brush has a ceramic coated barrel that heats up faster and holds heat longer.
  • It also retains and distributes heat evenly with no hot spots.
  • DOUBLE IONIC TECHNOLOGY: Both the barrel and the pins are ion infused to help smooth frizz and flyaways.
  • Ions also seal the cuticle and lock in moisture for smooth styles and healthy shine..
  • POLISHED WAVED BRISTLES: The Square Styler features polished waved bristles that offer strong tension yet are gentle on hair and scalp.
  • SQUARE BARREL: Offering multiple styling options, the square barrel shape is unique and functional.
  • Use the flat side for straightening and the edges for creating a modern bend or wave.
  • The barrel size is measured without the bristles..
  • IDEAL USE This brush is best used for styling with a blow dryer to create smooth and straight styles as well as adding volume and waves.
  • The larger 1.75" barrel size is best for medium to long hair..
Check Stock

Char-Griller E2123 Wrangler 635 Square Inch Charcoal Grill/Smoker, Black

  • Char-Griller Wrangler grill and smoker features airtight flanged hood with heat gauge.
  • Constructed of heavy gauge steel with double bottom.
  • Cast iron grates distribute heat evenly and lock in flavor.
  • 3 shelves for storing utensils, spices, and sauces.
  • Features 635 square inches of cooking space, 435 square inches on the main grill and 200 square inches of warming rack.
  • Features 635 inches of cooking space–435-square-inch main grill plus 200-square-inch warming rack.
Check Stock

VULCAN Security Chain and Lock Kit - Premium Case-Hardened - 3/8 Inch x 3 Foot (+/-2 Inches) - Chain Cannot Be Cut with Bolt Cutters or Hand Tools

  • NEARLY IMPOSSIBLE TO DEFEAT OR CUT - The case hardened chain cannot be cut by hand with bolt cutters, and the lock includes a maximum security mechanism for ultimate protection. The square link shape of the chain does not allow bolt cutters to get a proper grip and the lock has been specially designed to be nearly impossible to grip with burglary tools. If you do not have the keys, you literally need an acetylene torch to defeat this chain and lock kit..
  • NEARLY IMPOSSIBLE TO DEFEAT OR CUT - The case hardened chain cannot be cut by hand with bolt cutters, and the lock includes a maximum security mechanism for ultimate protection. The square link shape of the chain does not allow bolt cutters to get a proper grip and the lock has been specially designed to be nearly impossible to grip with burglary tools....
Check Stock

4 Sets 304 Stainless Steel Square U-Bolt Boat Trailer U-Bolts with Washers and Nuts L Heavy Duty U Bolts for Sailboat Trailer Automobiles Trailer Industrial Parts 1/2 D x 3 1/16 W x 4 5/16 Inch

  • Package includes: stainless steel u-bolt set include 4 pieces u-bolts, 8 pieces stainless steel flat washers, 8 pieces stainless steel nylon lock nuts, 8 pieces lock washers, all accessories are made of 304 stainless steel.
  • U-bolt size: 1/2 x 3-1/16 x 4-5/16 inch (D x W x L), thread length: 2-1/2 inches, suitable for 3 x 3 inch square beams and shafts.
  • Stainless steel material: u bolts for boat trailer are made of 304 stainless steel, strong and long-lasting.
  • These 304 stainless bolts prevent rust corrosion, acid corrosion and wear.
  • It's still perform well in rainy and humid seaside environment.
  • How to use: firstly choose the corresponding square U shaped bolt according to the size of the pipe, then drill holes in the connection, and finally lock nut and flat washer.
  • Use a hand wrench or socket ratchet when installing nuts.
  • Do not use an impact or a high speed socket driver.
  • Wide application: square u-bolt is applied to fix or connect the locked parts to rectangular wood and metal objects, such as cars, sailboat trailers, pipe, tube, plumbing and other industrial applications.
Check Stock

4 Pcs Soldering Nozzles for Hot Air Gun SMD Rework Station 853d 862d Replacement

  • [Great Compatibility]: 4 Pieces of hot air gun nozzles include 3 round nozzles of 5mm, 8mm and 10mm and 1 square nozzle of 13mm, compatible for 853D, 878D soldering station and other hot air guns, applicable to our soldering station models: YES0367, YES0368, YES0369, YES0370, YES0371, YES0372, YES0373, YES0374, YES0375, any inquiry is welcome.
  • [Practical Usage]: Nozzles of different size and shape are ideal for regulating the hot wind size and shape to heat different kinds of electronic components, 24mm diameter nozzle interface adapts to many hot air guns, easy to be installed.
  • [Useful Lock Screw]: With lock screw for locking the nozzle firmly to avoid hot air flow out from the gap between the nozzle and the heat gun air outlet steel pipe, and reduce temperature irregularity.
  • [Durable Material]: Sturdy and durable metal material not easy to rust and damage, suitable for long time use.
  • [Soldering Nozzle Size]: 3 Round nozzles sizes are 5mm, 8mm, 10mm.
Check Stock