Reviews Spur Gear Motor

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

TAMIYA America, Inc 1/10 Frog 2WD Buggy Kit, TAM58354

  • Changeable pinion/spur gears-allows gear ratio changes-3 of each included.
  • Straight ribbed racing front tires and high-grip rears.
Check Stock

Sumind 5 Pieces 54T 0.8 32 Pitch Plastic Spur Gear Compatible with 4x4 VXL Rally VXL HPS HPI RC Car and Boat

  • You will receive: 5 pieces of 54 tooth 0.8 32 pitch spur gear, meet your replacement needs and you can share them with your friends who love the....
  • Advantage: these spur gears allow you to control(such as increase or decrease) the final drive ratio and tune according to your situation for....
  • Quality materials: this plastic spur gear is made of plastic, lightweight and easy to install, you can use for a long time.
  • Wide application: the plastic spur gear is suitable for most of model car, such as compatible with 4x4 VXL Rally VXL RC vehicles, HPS. HPI and so on.
  • Suitable size: each spur gear measures approx. 0.8 module, which is compatible with 32 pitch or 8 module pinion gears.
Check Stock

Traxxas 36054-1 1/10 Stampede 2WD Truck BlueX RTR w/TQ Radio/iD/XL-5 ESC

  • Traxxas 36054-1 - Stampede XL-5 1/10 2WD Monster Truck & iD Battery RTR, Blue.
  • Features: Chassis: Fiber Composite Tub .08" (2mm) Thick, Gray in Color. Drive: Rear Wheel, Motor 550 Size Traxxas Titan 12 Turn, Fan Cooled. Radio: Traxxas TQ Two Channel 2.4GHz with Steering/Throttle Trim/Reverse, Throttle Neutral Adjust and High Torque Waterproof Steering Servo, Water Tight Receiver Box with #2216 4-Channel Receiver. Battery: 7-Cell Hump 3000mAh NiMH with Traxxas High-Current Connector and iD Auto Battery Identification that Allows Traxxas iD Equipped Charg.
  • Includes: (1) Stampede Chassis with Oil-Filled Shocks (1) 550 Motor (1) XL-5 ESC (1) Body (4) Tires (4) Foam Inserts (4) Wheels (1) 19 Tooth Pinion Gear (1) 23 Tooth Pinion Gears (1) 86 Tooth Spur Gear (1) TQ 2.4GHz Radio with Waterproof Electronics (1) 7-Cell Hump NiMH 3000 mAh Battery (1) 4A DC Car Charger Illustrated Instruction Manual.
  • Specs: Length: 16.25" (413mm) Width: 13" (330mm) Height: 9.5" (241mm) Weight: 2.98lbs (1355g) Approx. Wheelbase: 10.75" (273mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.75" (324mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Gear Ratio: 4.5:1 with Stock 19T Pinion Gear 3.7:1 with Optional 23T Pinion Gear.
Check Stock

Hobbypark 11184 Steel Diff Differential Main Metal Spur Gear 64T &11119 Motor Gear 17T RC Replacement Parts for Redcat HSP 1/10 Monster Truck

  • Produced by HobbyPark,Compatibile with: Redcat Lightning EP Drift, Lightning EPX PRO, Sandstorm, Sandstorm TK, Tornado Epx/epx PRO, Tsunami EPX, Volcano Epx/epx PRO, Vortex Epx/epx PRO 1/10 Scale Truck HSP.
  • 1x Diff Main Gear (64T) Diameter of The Hole:5mm.
  • 1xMotor Gear (17T) Diameter of The Hole:3.17-3.18mm.
  • 1 xGrub Head Screw (As shown in the picture).
  • please attention, because of the motor gear and this spur gear are metal, suggest to add lubricating oil, not only to reduce the friction between the metal gear, but also the sound will be a little bit small.
Check Stock

1 Pair Western Style Antique Spur, Male Knights Equestrian Equipment Spurs for Boots, Horse Riding Ornaments Low Carbon Steel Carving Spurs with Hand Engraved Trims

  • Western Antique Spurs, Men Knight Equestrian Equipment Spurs- Western-style spurs, hand-crafted and beautifully carved, suitable for all riding boots and male knights, creating a versatile denim temperament. Which can helps to improve leg skills or train horses, improve equestrian skills, assist in communication between knights and horses..
  • Horse Riding Ornaments Black Steel Engraved Spur- Western Style Antique Spurs are made of black low carbon stee materials, durable and not easy to bend, strong and resistant to corrosion. The rotating tooth roller not only can effectively control the horse, but also reduce the damage to the horse. The carved stud and the metal pendant at the end. At each step, a clang sounds and takes you into the wild Western world..
  • Wide Applications of the Horse Spur- The curved gear thorn reduces the stimulation of the horse and avoids significant damage to the horse. Knight Equipment Spurs are suitable for all kinds of occasions, such as training horses/ equestrian events/ dressage/ sports/ entertainment/ performances/ farms/ ranch etc..
  • Easy to Operate and Use- The slot is located at the rear and can be fixedly mounted between the spur gear and the belt. Spurs for Boots, Western Retro Cowboy Black Carbon Steel Carving Spurs wit....
Check Stock

Big Agnes Gear Loft Tent Accessory, Triangle

  • Keep your essentials within reach with a lightweight mesh gear loft that hooks onto the loops in your Big Agnes tent..
  • Please check your tent for compatability.
  • Compatible with Fly Creek HV UL 1/2 (standard, Platinum), Tiger Wall UL 1/2/3 (standard, mtnGLO, Platinum) Copper Spur Platinums, Copper Spur HV UL 1/2/3 (standard, mtnGLO), Fly Creek HV UL Bikepack 1/2, Copper Spur HV UL Bikepack 1/2, Seedhouse SL 1/2/3, C Bar 2/3, Copper Spur HV Expedition 2/3.
Check Stock

Dutton-Lainson StrongArm 12 Volt DC Powered Electric Winch - 4,500-Lb. Capacity, Galvanized Aircraft Cable, Model Number SA12000DC

  • Price For: Each Voltage Rating: 115VAC Mechanical Brake: Yes Motor HP: 1 Full Load Amps: 8 Manufacturers Warranty Length: 1 Year Rope Material: Wire Control Pendant Cord Length: 10 ft. Item: Electric Winch Gear Type: Spur Gear Full Load Line Speed: 3.5 fpm Gear Ratio: 570:1 No Load Line Speed: 18 fpm Clutch Type: None Included Rope Length: 25 ft..
  • Included Rope Dia.: 7/32" 1st Layer Line Speed: 3.5 fpm 1st Layer Line Pull: 2700 lb. Pulley Block: No Clutch Release: No Overall Width: 8-1/16" Overall Length: 11-3/8" Drum Capacity for 1/4 In. Cable: 68 ft. Overall Height: 8" Country of Origin (subject to change): United States.
Check Stock

Gear and Sprocket Replacement Kit for Liftmaster 41c4220a, fits Chamberlain, Sears, Craftsman 1/3 and 1/2 HP Chain Drive Models (Chain Drive Gear and Sprocket Kit)

  • Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings..
  • Compatible with Chamberlain, Sears, Craftsman and LiftMaster 1/3 and 1/2 HP chain drive models..
  • Compatible with chain drive Chamberlain Sears Craftsman manufactured operators 1984-current..
  • Installation: Step-by-step instructions included, free tech support available. This OEM kit 041c4220a includes all of the 41A2817 Drive / Worm Gear kit, and is easier to install because you do not have to disassemble the output shaft assembly - the spur gear is already mounted on the new output shaft..
Check Stock

ARRMA Steel 57T Slipper Set 0.8Mod ARA310948

  • Arrma ARA310948 - Steel 0.8Mod Slipper Set, 57T.
  • Features: Precision manufactured aluminum slipper hubs High strength 57T 0.8 module steel spur gear for maximum power handling capability Castellated....
  • Includes: (1) Assembled Slipper Clutch with Steel Spur Gear.
  • Part number(s) included (in factory packaging): ARA310948.
Check Stock

ARRMA Slipper Clutch Maintenance Set ARAC9103

  • ARRMA ARA311034 - HD Slipper Set, 0.8Mod, 57T.
  • Features: Precision manufactured aluminum slipper hubs Durable composite 57T 0.8 module spur gear for reliable power handling capability Castellated....
  • Includes: (1) Assembled Slipper Clutch with Composite Spur Gear.
  • Part number(s) included (in factory packaging): ARA311034.
Check Stock

Hobbypark Metal Diff Differential Main Gear 42T & Motor Pinion Gear 27T Set for WLtoys A959-B A969-B A979-B K929-B 1/18 Scale RC Car Upgrade Parts (Black)

  • Compatible with: WLtoys 1/18th A959-B A969-B A979-B K929-B.
  • Package Include:1x Metal Spur Diff Main Gear 42T and 1x Motor Pinion Gear 27T.
  • Produced By HobbyPark ,Well made and durable,100% New.
Check Stock

Zerodis Spur Strap, 1 Pair Handmade Leather Equestrian Spur Strap Cowboy Outfit Boots(Black)

  • Gentle on your horse (especially if you're new to riding with spurs) but effective when used correctly - and no spur marks! They also look great with a black boot and fit nicely..
  • If you love your horse you will love these spurs. Very gentle....
  • Fantastic quality and workmanship. Worth every penny..
Check Stock