Reviews Sprockets Pulley

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

• 1X crankshaft damper pulley holding tool.
• Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
• Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
• Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
• Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.

Bestong Universal Wrench Camshaft Injection Pump Cam Pulley Holder Sprocket Holding Tool Compatible with Dodge Audi Chrysler Ford GM Honda Mazda Nissan Toyota Volvo

• Compatible with : Ford, GM, Honda, Mazda, Nissan, Rover, Toyota, Volvo,Audi, Chrysler, Dodge ....
• Fit for : all models with sprocket holes larger than 12mm (1/2") & hole separations from 19mm to 190mm (3/4"-7.5").
• Material: Made of high quality steel for durability. Long handle with non-slip grip provides enough leverage and enables you to easily hold the pulley when tightening or loosening retaining bolts. no harm to your hand !.
• Using this sturdy tool to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt.
• Package included: 1pcs Camshaft Pulley Holder Tool . [ 100% Satisfaction service ] — If you're not 100% satisfied with our PRODUCTS, simply return it for a full refund in 30 days. Professional AND Sincere Service allows you to take no risks to purchase.Thank you..

Zipper Gap Buckle compatible with Neverfull Pochette Little Pouch Chain Strap Connective Buckle (Gold)

• Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
• 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
• 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
• 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
• 【Go Kart Torque Converter Kit comes with】1 x 3/4" Driver Pulley.

41BS 12 Roller Chain Sprocket, Bored-to-Size, Type B Hub #41 Chain 7/8 bore

• These sprockets are use with #40 roller chain as driver or driven sprockets requirments.

MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

• Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts..
• 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
• 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
• 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
• 【Go Kart Torque Converter Kit comes with】1 x 3/4" Driver Pulley.

Recajia Universal 6 Hole Flywheel Rotor Magneto Puller Tool with 5mm Diameter and 6mm Bolts

• [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
• [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
• [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
• [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
• railway vehicle, factory machinery and mining equipment maintenance, etc..
• [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..

50BS10 Roller Chain Sprocket, Bored-to-Size, Type B Hub #50 Chain 7/8 bore

50BS11 Roller Chain Sprocket, Bored-to-Size, Type B Hub #50 Chain 1\ore

Bonvoisin 15T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

• [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
• [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
• [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
• [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
• railway vehicle, factory machinery and mining equipment maintenance, etc..
• [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..

Mycheng 6Pcs Carburetor Adjustment Tool Kit with Case Including 21 Teeth Splined/7 Teeth Splined/Hexagon/ Double D/Small Head Single D/Single D for 2 Cycle Carburetor Engine

• Adjustable tool is designed to both hold and turn cam sprockets.
• The tool is needed to turn the cam sprockets to adjust the cam position.
• Can also be used to hold the cam sprocket in place when removing the cam bolt.
• Will work on all single and dual overhead cam sprockets with holes.

2006 2007 2008 Kawasaki Ninja 650 650R EX650 Front Sprocket 16 Tooth

• Race-Driven sprockets are manufactured to exceed OEM specifications.
• Race-driven sprockets are produced using hardened S45C steel.
• Fits 2006 2007 2008 Kawasaki Ninja 650R EX650.

2006 2007 2008 Kawasaki Ninja 650 650R EX650 Front Sprocket 15 Tooth

• Race-Driven sprockets are manufactured to exceed OEM specifications.
• Race-driven sprockets are produced using hardened S45C steel.
• Fits 2006 2007 2008 Kawasaki Ninja 650R EX650.

2006 2007 2008 Kawasaki Ninja 650 650R EX650 Rear Sprocket Silver 46 Tooth

• Race-Driven sprockets are manufactured to exceed OEM specifications.
• Race-driven sprockets are produced using hardened S45C steel.
• Fits 2006 2007 2008 Kawasaki Ninja 650R EX650.