Brinly DT-48BH Tow Behind Dethatcher 48-Inch
- Maximum Thatch Removal: For larger mowers and lawns, a 48" working width and 2 rows of 12 independently flexing spring steel tines comb through a....
- Ideal for Large Yards: Wide 48" working width is perfect for larger mowers or bigger greenspaces - covering more ground for quicker results..
- Long-Lasting Construction: All steel construction, tines are made of durable spring steel.
- in the unlikely event of a breakage, a safety rod is....
- Transport Wheels: 8" never-flat transport wheels are located behind and in-line with the tray to minimize footprint width and facilitate leveling..
- Spring Steel Tines: 24 long-lasting, triple-coil strength 3/16″ diameter spring steel tines stay flexible and guarantee performance..
Check StockMonroe 172604 Quick Complete Strut Assembly
- ...ing Plate The new bearing plate helps ensure consistent precise steering return by eliminating “memory steer ” Helps eliminate steering noises commonly associated with worn or corroded bearings Also improves overall steering smoothness (if equipped - front only).
- Upper Spring Seat Each new spring seat is engineered to complement the ride control characteristic of the corresponding premium Monroe strut and upper strut mount The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis Also supports the vehicle’s weight and helps properly offset the spring in the strut tower.
- Coil Spring Manufactured from high-quality U S steel each coil spring is precisely calibrated to support the vehicle’s weight and help ensure correct ride height Each spring is painted or powder-coated for excellent rust resistance.
- Boot Kit The durable strut boot protects the strut rod and seal from dirt and debris The premium bumper prevents component damage when the suspension bottoms out.
Check StockJEGS Valve Spring Shim Kit | 1.437” OD / 0.645” ID | Made In USA | Includes 3 Sets Of 16 Shims
- KIT INCLUDES THE FOLLOWING: (16) 0.015" (blue tempered spring steel), (16) 0.030" (case hardened steel), (16) 0.060" (case hardened steel).
- CASE HARDENED 0.030 and 0.060 thick valve spring shims and blue tempered spring steel 0.015 valve spring shims.
- MADE IN USA with high quality materials and assembly.
- EASILY WITHSTANDS THE ABUSE of a high-performance engine or daily driver.
Check StockJEGS Valve Spring Shim Kit | 1.25” OD / 0.812” ID | Made In USA | Includes 3 Sets Of 16 Shims
- KIT INCLUDES THE FOLLOWING: (16) 0.015" (blue tempered spring steel), (16) 0.030" (case hardened steel), (16) 0.060" (case hardened steel).
- CASE HARDENED 0.030 and 0.060 thick valve spring shims and blue tempered spring steel 0.015 valve spring shims.
- MADE IN USA with high quality materials and assembly.
- EASILY WITHSTANDS THE ABUSE of a high-performance engine or daily driver.
Check StockGeneral Tools 79 Steel Automatic Center Punch Black
- DELIVERS A HIGH IMPACT STRIKE - one-handed spring-loaded impact operation, no hammer required.
- ADJUSTABLE SPRING TENSION - adjustable spring tension cap for light or heavy strokes and marking.
- ALL STEEL 5" BODY - center punch has an all-steel body, knurled finger grip and rust-resistant black oxide finish, 1/2" body diameter.
- STEEL POINT - threaded, replaceable hardened steel point and shaft.
- AUTOMATIC PUNCH DEPTH - center punch can be set for repetitive work.
Check Stockuxcell Wire Diameter 0.012\
- Package Content: 30pcs x Compressed Spring.
- Alloy spring steel offers good mechanical properties with greater corrosion and heat resistance than music wire.
- Made of Alloy spring steel , features high elasticity and good precision, installed small size and generate strong force..
Check Stockuxcell Wire Diameter 0.047\
- Package Content: 10pcs x Compressed Spring.
- Spring steel offers good mechanical properties with greater corrosion and heat resistance than music wire.
- General use spring equipment tools etc.Can not be used outdoor..
- Made of Alloy spring steel , features high elasticity and good precision, installed small size and generate strong force..
Check StockBrinly DT-480BH-A 48' Tow Behind Grass Dethatcher, Removes Thatch from Large Lawns in Less Time
- Maximum Thatch Removal: For larger mowers and lawns, a 48″ working width and 2 rows of 12 independently flexing spring steel tines comb through a lawn, lifting thatch up and out of the lawn where it can be mowed or mulched to promote a healthier root system..
- Ideal for Large Yards: Wide 48″ working width is perfect for larger mowers or bigger greenspaces – covering more ground for quicker results..
- Long-Lasting Construction: All steel construction, tines are made of durable spring steel.
- in the unlikely event of a breakage, a safety rod is included to catch the tine and prevent contact with mower blades. No flat rubber-tread transport wheels for durability..
- Transport Wheels: 8″ never-flat transport wheels are located behind and in-line with the tray to minimize footprint width and facilitate leveling..
- Spring Steel Tines: 24 long-lasting, triple-coil strength 3/16″ diameter spring steel tines stay flexible and guarantee performance..
Check Stock2Pcs Premium Porch Swing Spring with Weight Capacity of 300 Lb,Heavy-Duty,Chrome Plated Spring for Hammock Chair,Punching Bag and More
- WEIGHT CAPACITY:heavy-duty stainless steel spring for porch swings,hammock chairs,punching bags or other heavy object,2 springs have a weight capacity of 600lbs..
- COMFORT:by using this spring,you can add proper bounce to your favorite porch swing,not too stiff or too weak,make your life a lot more fun..
- ANTI-RUST:this spring is made of stainless steel and chrome plated,which means it is easy to clean and not tend to rust no matter indoor or outdoor..
- EASY TO SET UP:you can easily install this spring to your hammock chair in 3 minutes without using any tools..
- PREMIUM MATERIAL:this spring is made of heat treated stainless spring steel,2’’ in diameter and 8’’ in length.2 springs can hold up to 600lbs,so enjoy your leisure time securely..
Check StockAmazon Basics 20-Piece Steel Spring Clamp Set - 15 Pieces 3/4-Inch 5 Pieces 1-Inch
- 20-piece steel spring clamp set makes a useful addition to any tool box.
- Includes 3/4-inch jaw-open-size steel-spring clamps (x15) and 1-inch jaw-open-size steel-spring clamps (x5).
- Made of non-corroding nickel-coated steel for long-lasting strength.
- durable tempered-steel springs provide quick, smooth opening and firm closing..
- Pressure-point near jaw tips for effective clamping.
- non-marking PVC-coated tips protect surfaces.
- PVC-coated handles offer a non-slip hold.
- Backed by an Amazon Basics 1-year limited warranty.
Check StockBARTON Spring Bar Tool - For Watch Pin Removal and Band Replacement
- MULTI PURPOSE: One end is shaped to grasp spring bar from interior side of lug.The other end is shaped to push end of spring bar if accessible from....
- SPARES INCLUDED: Comes with two extra tips (one of each type)..
- INTEGRATED RULER: Metric ruler (mm and cm) engraved on side to help measure lugs, bands and other components..
- BUILT TO LAST: Stainless steel with threaded tool tips that easily screw in and out..
- SPRING BAR TOOL: Our Stainless Steel watch spring bar removal tool with replaceable tips is the perfect tool to remove your watch spring bars..
Check StockAB Biller Redesigned Professional Speargun Stainless or Wood Made in USA Padauk Wood 32
- Hardened Stainless Spring Steel Tip, with Double Barb, Swivel and Safety Cap..
- Stainless Spring Steel shaft, 5/16" hardened to Rockwell 44C. Open Muzzle for easy top loading..
- All natural rubber slings, 9/16" O.D. with stainless steel wishbone, Muzzle, grip and butt are rugged plastic..
- Redesigned, patented safety allows for easy, one-handed operation featuring silent lock and unlock. Adapts for both right and left-handed position..
- Patented trigger mechanism manufactured from hardened stainless spring steel and housed in a Nylon cartridge provides smooth and reliable trigger....
Check StockWellfit Watch Pins, 1.8mm Thickness Heavy Duty Spring Bar, 4 Pack Stainless Steel Watch Band Pins, 22mm
- Compatibility - Designed to fit any watch that uses standard 18mm, 19mm, 20mm, 21mm, 22mm , 23mm, 24mm, 25mm, 26mm spring bars. The size you need is the same as the lug width of your watch band (or buckle width if the spring bar is to be used for a buckle)..
- High Quality Stainless Steel – Made of 316L stainless steel for strength and durability, keep your watch safe..
- Double Flange Spring Bar - Double shoulder design allowing you to quickly and easily insert and remove for repair or adjustment..
- Standard Diameter - 1.8mm diameter fits most bands and watches. (Due to dimensional tolerances, the diameter will be between 1.78mm and 1.80mm)..
- Note – You will get 4 spring bars per package. The spring bars here can only be used for watch bands which have the lug width (or buckle width, if the spring bars are for buckle attachment) of the spring bars selected. Because of the spring mechanism, the spring bars are slightly longer than the size given. This is necessary in order for the spring bars to have a firm hold in the watch after fitting of the watch bands..
Check Stock