Reviews Split Point Drill Bit Set

DEWALT Black Oxide Drill Bit Set, 20-Piece (DW1177) (Black & Gold)

  • 135-degree split point tip of the drill bits for wood, metal or plastic is designed to help reduce walking.
  • DEWALT drill bit set is made from High Speed Steel to be used in plastic, wood, and metal.
  • Tapered web design for extreme durability and resisting breakage of the drill bits.
  • Black and gold coating to help prevent rust and wear.
  • 3-Flats shank to reduce spin-out in the chuck*.
  • Size markings on the drill bit shank for identifying sizes quickly.
  • Black oxide finish for greater wear protection.
  • Parabolic flute design for greater bit strength.
  • 135-degree split-point design reduces slip and walking.
  • Includes tough case container to keep bits organized.
Check Stock

COMOWARE Stubby Drill Bit Set for Metal, 5pcs HSS M2 Short Length Drill Bit with 1/4-Inch Quick Change Hex Shank

  • Premium High Quality - Short length drill bit is made from superior HSS M2 material with evenly distributed carbides for long lasting strength and durability. The drill bit is always sharp at each use..
  • Twist Design - Full ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces..
  • Quick Change - 1/4” hex shank fits into all power tools more easily and securely, it is suitable for quick change drill chunks for fast and easy swapping..
  • Application Widely - The drill bit set includes 5pcs of drill bits in 5 different sizes to satisfy your demands: 3/32”, 1/8”, 3/16”, 1/4”, 5/16”. The drill bit set is more suitable for processing plastics and woods, it can be also used for hard metal..
Check Stock

Greenworks 90 Piece Impact Rated Driving Set

  • SET INCLUDES: (21) 135° Split Point Black Oxide Drill Bits，(4) hex shank spade bits，(8) Hex Shank Nut Setters，(1)Magnetic Bit Holder, (27) 1 in. Insert Bits，(4) Drill Stops, (1) Countersink, (1) Center Punch, (1)Hex Key, (6) 2 in. Power Bits, (5) Carbide-tipped Masonry Drill Bits, (5) Black and Silver Brad Point Drill Bits, (4) Hole Saws, (1) Hole Saw Mandrel, (1) Carrying Case..
  • VERSATILE: Suitable for drilling wood, metal, plastic, and masonry..
  • CONVENIENT STORAGE: The plastic carrying case comes with a locking system and labeled compartments to keep your bits organized..
  • MAGNETIC BIT HOLDER: Magnetic bit holder holds drill bits for driving fasteners..
  • BLACK OXIDE FINISH: Provide superior durability and up to 50% improved lifetime compared to standard high-speed steel drill bits. They also reduce friction, giving you improved hole boring speeds..
Check Stock

JEFE HEX 9-Piece Drill Bits Set-1/16\

  • 【Premium HSS Titanium Coating】High speed steel (HSS) with titanium coating gives Jefe Hex drill bit great durability and prolongs 3 times longer life than drill bits without coating..
  • 【Easy Cut Split Point】Jefe Hex Easy Cut Point design makes drilling easy with less pressure and prevents drill bit walking on the working surface. Fully ground modified parabolic flute design clears chips quickly, decreases friction and heat damage. Tapered web provides durability and reduces breakage..
  • 【Quick Change】1/4" (6.4mm) hex shank fits into standard power tools and impact drivers. Jefe Hex drill bit’s solid bonding technology manufacturing eliminates radial runout and improves concentricity. High torque, impact-rated accuracy..
  • 【Applications】 - Jefe Hex drill bit sets are built for general purpose applications, such as DIY projects, home maintenance and MRO (Maintenance, Repair and Operations). Working materials include steel, copper, aluminum, zinc alloy, cast iron, wood and plastics..
  • 【Package & Size】 - 9 pcs drill bit set in a double blister pack with easy opening design. Size range: 1/16.
Check Stock

Drill Doctor 750X Drill Bit Sharpener

  • SHARPEN MULTIPLE TYPES OF DRILL BITS – high-speed steel, masonry, cobalt, & TiN-coated drill bits. Designed for the serious tool user, this professional, easy-to-use system makes it simple to keep a sharp, perfectly angled cutting edge on bits you use often.
  • CUSTOM POINT ANGLE SHARPENING – set any angle from 115° to 140° with cast aluminum point angle shuttle for added durability, a unique BACK-CUT split-point bit an extra-narrow chisel point, making it faster to penetrate and less likely to wander on the material you are drilling in to.
  • EXTEND THE LIFE OF YOUR BITS – from 3/32-inch to ¾-inch, create & remove split points & adjustable material take-off allows you to adjust the amount of material removed during sharpening.
  • 3-YEAR WARRANTY – protects every Drill Doctor bit sharpener against defects due to workmanship or design, using a 115V machine in a location with 230V power sources voids the warranty.
  • MANUFACTURED IN OREGON – we design, engineer, & assemble our sharpening machines all under one roof in the USA.
Check Stock

Y GINZA RBA: Y TRYSOR MAWR (Welsh Edition)

  • Sharpen multiple types of drill bits – high-speed steel, masonry, Cobalt, & tin-coated drill bits. Designed for the serious tool user, This professional, easy-to-use system makes it simple to keep a sharp, perfectly angled cutting edge on bits you use often.
  • Custom point angle sharpening – set any angle from 115° to 140° with cast aluminum point angle shuttle for added durability, A unique back-cut split-point bit an extra-narrow chisel point, making it faster to penetrate and less likely to wander on the material you are drilling in To.
  • Extend the life of your bits – from 3/32-inch to ¾-inch, create & remove split points & adjustable material take-off allows you to adjust the amount of material removed during sharpening.
  • 3-Year warranty - protects every Drill Doctor bit sharpener against defects due to workmanship or design, using a 115V machine in a location with 230V power sources voids the warranty.
  • Manufactured in Oregon - We design, engineer, & assemble our sharpening machines all under one roof in the USA.
Check Stock

MAX-CRAFT HSS Cobalt Drill Bit Double End 30# (0.1285') Stubby Body Drill Steel Metal Iron-10Pcs

  • ✔️DOUBLE END DRILL BIT SIZE:  30#(0.1285")Diameter) x 5/8"( Flute Length) x 2" (Overall Length).
  • ✔️MATERIAL: HSS Cobalt Material is the best hardened material for drilling longest life.
  • ✔️DOUBLE END CUTTING POINT :The 2 cutting point of one single drill bit, when one cutting point is used bored and the other cutting end can be used, as another new drill bit..
  • ✔️SPLIT POINT 135 DEG. ANGLE: No center punch is needed-- the aggrevsive 135 Deg. Split Point quick-cut points are self-centering and penetrate quickly with less pressure..
  • ✔️APPLICATION: Drill through stainless steel, general steetl, metal sheet, iron, copper, aluminum, plastic….
Check Stock

amoolo 1/4\ Cobalt Drill Bit(10 Pcs), M35 HSS Metal Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron

  • 【10Pcs 1/4" Cobalt Drill Bits】10Pcs - 1/4”(Dia 6.35mm) x 2-3/4”(Flute Length 69.85mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
  • 【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
  • 【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
  • 【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Check Stock

INTOO Drill Bit Set 21 Piece 1/16'-1/2' Quick Change Impact Driver Bit Set

  • Specifications: 21pcs titanium drill bits set, include 1/16X2,5/64X2,3/32X2,7/64X2,1/8X2,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,5/16,3/8,1/2 with 1/4 hex shank.
  • Highlights: Special plug hex shank of quick change drill bit is an upgrade version, it shows excellent performace than normal pressed hex shank, avoid drills peeling from the hex shank, effectively keep hex shank locked with drill bits during impact drilling process..
  • Characteristics:135° split point not only promises cutting speed,but also prevents slipping when start drilling；Titanium coating increases the ware-resistance and durability, effect long life drilling. Non-disposable packing makes sure the drills well stored..
  • Quick change: 1/4 inch hex shank of hex bit set well fits all power tools,especially for locking into quick change chucks,suitable for makita drill and makita impact driver, dewalt drill bits set,milwaukee drill bit set,effects quick change more easily and securely..
  • Widely used: industry grade high speed steel drill bit sets with high hardness, can be widely used in Steel, Wood, Plastic, etc. Ideal for DIY, home and general building/engineering using.Ideal impact drill bit set and drill bits for metal..
Check Stock

HILTEX 10005 Jumbo Silver & Deming Drill Bit Set, 8 Piece, 1/2' Inch Shank Industrial Large Drill Bit Set 9/16” Drill Bit to 1' Drill Bit, Metal Drill Bits for Steel, Reduced Shank Drill Press Bits

  • HIGH SPEED STEEL: These metal drill bits for steel are made of high speed stainless steel and is designed to ensure sharp and fast execution in any material leaving clean results. This 8-piece drill-bit set is capable of drilling through plastic, copper, stainless steel, and other surfaces..
  • LARGE DRILL BIT SET: Heat treated carbon steel with a black enamel coating is durable and can withstand heavy duty operation for a long tool life..
  • PRECISION DRILLING SET: Bit is precision ground with geometry of 135-degree split point for quick self-centering penetration and an accurate start that prevents walking and clears chips and particles faster..
  • DRILL PRESS BITS: Tri-flat on the shanks of drills are constructed for tighter chucking maximizing security for precise holes. This pattern allows the bits to fit securely into your power tools and helps eliminate slippage..
  • DRILL BIT SET INCLUDES: Complete set of 8 pieces come in a convenient storage case for easy storage and portability.
  • sizes include: 1/2″ Shank x 9/16″ Drill Bit, 5/8″ Drill Bit, 11/16″ Drill Bit, 3/4″ Drill Bit, 13/16″ Drill Bit, 7/8″ Drill Bit, 15/16″ Drill Bit, and 1″ Drill Bit.
Check Stock

AresMro Hex Shank Drill Bit Set (13Pcs Set+3 Pcs Free), Premium 4341 HSS Titanium Impact Hex Drill Bits for Wood, Steel, Metal, Plastic, Quick Change Design (1/16”-1/4”)

  • 【Combo Set of 16 Pcs】Total 16 Pcs hex shank twist drill bit set including sizes:13 most commonly-used sizes (1/16",5/64",3/32",7/64",1/8",9/64",5/32",11/64",3/16",13/64",7/32",15/64",1/4") to satisfy all needs, additional piece of 1/16", 5/64" and 3/32" for easy replacement..
  • 【Premium HSS Titanium Coating】Industry grade 4341 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. Titanium coating increases wear-resistance and durability..
  • 【Flutes Form & 135°Split Point】2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. 135° Split Point with straight shank prevents walking and makes drilling precise. No center punch is needed..
  • 【Quick Change】1/4 inch(6.4mm) hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck..
  • 【Meet Your Demands】Small Drill bits for soft metal, wood, plastic, steel within 5mm thickness, aluminum alloy and other soft metals. Ideal for DIY projects, household maintenance and repair.×NOT for glass, ceramic or concrete drilling..
Check Stock

J&Q 29 PCS Mechanist Drill Bit Set, M2 HSS Heavy Duty Mechanic Drill Bit Kit with Black and Gold, 3-Flat Twist Drill Bit Set for Metal (1/16' - 1/2' x 1/64”) with 135 Degrees Split Point for Metal, Aluminum, Wood and Plastic

  • BLACK & GOLD FINISH MECHANIST DRILL BIT SET: Premium M2 high speed steel construction with black and gold finish offers the drill bit wear resistance and durability. Black and golden surface finish resists corrosion and lubricates the drill bits better for cutting metal, wood, and plastic..
  • 135 DEGREES SPLIT POINT and PRECISION FLUTES: 135 degrees split point and twist design prevent "Walking", reduce logging, and penetrate hard material without a pilot hole. Precision fully ground cutting edges and flutes increase cutting speed and clear chips quickly to extend drill bit working life..
  • SET SIZES INCLUDE: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64" and 1/2". (1/16" to 1/2" in 1/64" increments)..
  • WIDE APPLICATIONS: 3-flat shanks fit standard three-jaw drill drivers and ensure bit not spin in the drill drivers to improve working efficiency. J&Q 29 pcs mechanic set can be used in drilling metal, wood and plastic for home improvement, DIY and engineering. This set is suitable for electricians, fitters, maintenance workers and plumbers..
  • PACKAGING: All set sizes are kept in a strong and professional ....
Check Stock

CaRoller Drill Bit Set 13 Piece Twist Hex Shank Quick Change High Speed Steel Titanium Coating for Metal, Aluminum Alloy and Plastic Wood 1/16' to 1/4'

  • ✔【PREMIUM HSS TITANIUM COATING】Industry grade 4341 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. Titanium coating increases wear-resistance and durability..
  • ✔【FULLY GROUND PROCESS & 135° SPLIT POINT】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° Split Point with straight shank prevents walking and makes drilling precise. No center punch is needed..
  • ✔【Quick Change】1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck..
  • ✔【MULTIPLE APPLICATION】Small Drill bits for soft metal, wood, plastic, steel within 5mm thickness, aluminum alloy and other soft metals. Ideal for DIY projects, household maintenance and repair.NOT for glass, ceramic or concrete drilling..
  • ✔【Specifications】13pcs titanium drill bits set, include 1/16", 564", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4" bit set with 1/4 hex shank..
Check Stock